133,780 used machines on RESALE, but how to find them? Machine Search
Casing-in machine Make Schmedt Model Präleg HHS1801 Year 1998 Minimum size 80 x 110 x 2 mm Maximum Size 340 x 320 x 80 Speed up to 200 cycles per hour Available direct
Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock
Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.
Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...
Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.
Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diametr: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l p
AXLE HOLE PUNCH Structure Three-part frame with column guides Drive punching axle pneumo-hydraulic Press force 490 kN Total press stroke: 100 mm Press stroke: 12 mm Cutting impact damping: hydraulic Max. travel cutting impact absorption 7 mm Required air pressure (factory) 6 bar max. tool size 880 x 880 mm min. tool size TBD Ejector function hydraulic Ejector stroke 10 mm Ejector force approx. 50 kN Tool Weight TBD Weight of the upper part of the mould TBD Diarrhea hole diameter 120 -150 mm Clamping tool adapter plate according to template drawing Infeed height top table top 155 mm Adjustment of infeed height due to tool regrinding 0 to -15 mm Disposal of stamping waste. through the table into a box Diameter of punching waste. .. 25 -50 mm Disposal of scrap metal in DLR in crate Manual tool installation Tool clamping manual Pitch circle diameter ejector quills (min -max.) 250 to 500 mm ...
Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diameter: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l
USM Haller Desk 175x100cm, Pearl Grey Auction-ID: A7-46320-83
- Content: 68 + 7 HL - With vibrating spout - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Hopper height : 1440 mm
According to photos, weight estimated Auction-ID: A1-45666-13
Key data: 200 mm, 250 mm
Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm
New, Haner Tilting bucket, CW 10 quick coupler Auction-ID: A3-43524-53
-1 chisel -Hydraulic lines -CO bottle -Tool case -New Auction-ID: A3-43524-25
Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories
Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg
-2 chisels -Hydraulic lines -CO bottle -New Auction-ID: A3-43524-125
-Platform extension : 900mm -No documents Auction-ID: A3-43525-124
Naber Hardness Kiln 380 V 12 A max. 1260 C Length 1 m Width 0.87 m Height 1.47 m Temperature Processor TP 10 850 - 1250 C pre-programmed
maximum number of results exceeded
please refine your search
100 € 
