ha ro used for sale

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm -Weight: 4.8 kg/piece

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 460/370/H920 mm -Weight: 18 kg

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: 115 mm : 200x50 mm : 80x70 mm : 600 mm : 1230 mm length in total: 1555 mm length in width: 540 mm : 540 mm turning radius: 1275 mm weight: 79 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crank winch, Dunkraft, diamond jack, steel winch -Hexagon socket: 32 mm -with: counterweight -Dimensions: 730/400/H110 mm -Weight: 9.8 kg

Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

HAND-PALLET-TRUCK Equipment / Additional information: -Lift loads -Working at the ideal height -QuickLift -With hand-hydraulic lifting drive -Height approx. 80 cm

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

Steel hall, steel construction, trapezoidal sheet clad used Manufacturer: unknown Dimensions approx. 28 x 10 x 23 m The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

Workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 165 watts -Number: 1x lamp available -Dimensions: 540/540/H710 mm -Weight: 9.7kg

Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm -Weight: 0.6 kg

Inserts, hand reamers, reamer, reaming tool, fitting knife cutting set -Type: SP-AZ93R6 -Dimensions: 22x7x3 mm -Inserts: for reamers -Number: 11 packages available -Price: per piece

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm -Weight: 10 kg

Long-blade sheet metal and round steel shears -Sheet metal shears: sturdy -Material: Flat steel -Round: up to 15 mm -Square: up to 15 mm

Hand lever valve, directional control valve, valve, hydraulic valve, pressure valve, valve block -Manufacturer: blb -Type: bm40/5 GU/2XLC A1/3XD1 -Weight: 9 kg

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 650 watts -Max. Drill: 6 mm -Connection: 230 volts -Weight: 2 kg

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm -Depth: 120 mm -Drain: Ø 52 mm -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 420 mm -Depth: 180 mm -Edge: 18 mm -Drain: Ø 54 mm -Number: 2x available -Price: per piece -Dimensions: 460/H180 mm -Weight: 2.5 kg

Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 380 mm -Depth: 180 mm -Edge: 22 mm -Drain: Ø 54 mm -Quantity: 1x available -Dimensions: 425/H180 mm -Weight: 2.1 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

Hammer mill Tornado THM 90 A for waste grinding Power 15 kw Hopper with reel, dosing screw, control box Complete with all attachments Good condition

Bearing bushings, half-shell, drill bushing -Number: 6x AL 16065 (John Deere) Price: complete -Weight: 2.1 kg

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to 15 mm -Overall dimensions: 460/160/H1230 mm -Transport dimensions: 1000/160/H440 mm -Weight: 23 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm -Weight: 25 kg