ha ro used for sale

Safety relay, safety control unit, undervoltage relay, switching device, servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter, control module, safety controller -Manufacturer: Reis Robotics, Safety Controller -Type: SCR2 -Identification number: 3522448 -Operating voltage: 24 VDC -Number: 2x safety controllers available Price: per piece -Dimensions: 385/210/H80 mm -Weight: 2.1 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder, 150 mm stroke -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: Röhm / unknown, revolving center points 2 pieces -Type: Röhm 102N MK2 / without type designation -Intake: MK2 -Price/delivery: complete -Transport dimension: 160/100/H50 mm -Weight total: 2 kg

Fan, fan, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Rosenberg, axial fan axial fan suction fan -Type: ... -Power: 0.52 kW / 1340 rpm -Fan: Ø 500 mm -Transport dimensions: 950/455/H740 mm -Weight: 21 kg/pc.

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo type plate -Dimensions: 1000/570/H760 mm -Weight: 388 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

mechanically switchable clutch, releasable clutch, power clutch, clutch -Manufacturer: SEW-Eurodrive, motor/gearbox coupling housing with claw coupling -Use: for gear units SEW-Eurodrive type LP112 or similar -Claw coupling: KTR Rotex 38 -Flange: Ø 250 mm bolt circle Ø 215 x 14 mm -Recess: Ø 180 mm, dimensions/individual components see photos -Dimensions: Ø 250 x 225 mm -Weight: 19 kg

Steering ring, slewing ring, large diameter bearing, ball bearing slewing ring -Manufacturer: Rothe Erde, steering wheel type 16L/750 -Outer diameter: bottom 750 mm -Inner diameter: top 580 mm -Height: 45mm -Hole circle: Ø 730 x 10 mm / Ø 625 mm M8 -Number: 2x available -Price per piece -Dimensions: Ø 750 x 45 mm -Weight: 23 kg/piece

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic claw coupling -Type: 65 CH-NR.145147 N -Bore hub: Ø 75 mm / Ø 60 mm see photo technical drawing -Number: 2x coupling available -Price per piece -Dimensions: Ø 135 x 210 mm -Weight: 13.9 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 23 x 9-10 SC 10 RIM 6.50F -Bolt circle: Ø 162 x 20 mm -Bore/recess: Ø 110 mm Quantity: 1 piece available -Dimensions: Ø 570 x 190 mm -Weight: 56 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions each: Ø 525 x 220 mm -Weight: 49 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 -Bolt circle: Ø 170 x 18 mm -Recess: Ø 140 mm -Price/Delivery: complete -Dimensions each: Ø 540 x 215 mm -Weight: 54 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 7.00-15 Rim 5.5-15 532/121-2 -Bolt circle: Ø 220 x 20 mm -Recess: Ø 160 mm -Price/Delivery: complete -Dimensions each: Ø 730 x 180 mm -Weight: 85 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Manufacturer: Röhm, top jaws jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 61/54/H47 mm -Total weight: 0.7 kg

milling machine vice, hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power vice, NC power clamping vice -Manufacturer: Röhm, hydraulic vice with rotary table -Type: RB 135 -Clamping jaws: 135 x 40 mm -Clamping depth: 150 mm -Dimensions: 470/260/H150 mm -Weight: 47 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container turning device, without drive -Roll spacing: 290 to 1205 mm -Rollers: 4 pieces on both sides Ø 230 mm, total width 282 mm -Load capacity: kg -Dimensions: 940/640/H835 mm -Weight: 445 kg

container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 -Bolt circle: Ø 160 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions each: Ø 550 x 215 mm -Weight: 58 kg/piece

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks -Manufacturer: Röhm Gamet, pneumatic clamping cylinder for power chucks -Mounting: Thread M60 -Bolt circle: Ø 88 mm / M8 -Dimensions: see photos -Dimensions: 267/185/H235 mm -Weight: 18.2 kg

Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, revolving center points 5 pieces -Type: Röhm 108H MK4 / 108HVL MK4 / 3x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 290/230/H80 mm -Weight: 9.6 kg

Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm -Number: 6x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4009 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 315/85/220 mm -Weight: 3.6 kg/pc.

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter, ferrite adapter, ferrite filter -Manufacturer: Reis Robotics, Ferrite Adapter Filter, Ferrite Filter -Type: unfortunately without a type designation -Number: 3 filters available -Price: per piece -Dimensions: 150/140/H80 mm -Weight: 0.7 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc.

Tires, tires with rims, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Continental, tire CSE-Robust SC 15 with rim from GSL aerial work platform -Tire size: 23x9-10 PR 134A5 IC30 -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 115 x 15 mm -Hub bore: Ø 65 mm -Submission/Price: complete -Dimensions: Ø 560 x 215 mm -Weight: 43 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.

x-travel: 540 mm y-travel: 635 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: 10,2 t dimensions of the machine ca.: 2,9 x 2,9 x 3,1 m Röders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center General Machine Data Manufacturer: Röders TEC GmbH (Germany) Machine Type: 5-Axis CNC Milling and Grinding Center Model: RXP 601 DSH Design: Vertical High-Speed Machine Axis System: X / Y / Z + A / C Drive System: Direct drives in all linear and rotary axes Measuring Systems: Optical direct measuring systems in all axes Thermal Management: Active temperature stabilization of all main components Workspace & Mechanics X-axis travel: 540 mm Y-axis travel: 635 mm Z-axis travel: 400 mm A-axis swivel range: ±115° C-axis continuous rotation (360°) Max. workpiece weight: up to 200 kg Machine weight: approx. 10,200 kg Space requirement (L×W×H): approx. 2,950  ...

Used line for weighing, portioning, and packaging apples into polyethylene bags made by MAF-RODA and GIRO. The apple weighing, portioning, and packaging line consists of several components that, when assembled, form a single unit. Line components: 1. Water unloading tank. 2. Water unloading chute. 3. Fruit elevator from the water. 4. Inspection table. 5. Brush dryer. 6. Apple feed conveyor. 7. PDG series fruit weighing machine. 8. Plastic bag packaging head with label printer. 9. Rotary table. 10. Water circulation pump.

Manufacturer: Biesse , Type: Rover 24, Year: 2002, Software: Compass kann mit gekauft werden, B-axis: 100/50/20, Maschinensteuerung: 6170, Programming station office: 1380, Work piece width min-max mm: 150, Min.-max. workpiece length in mm: yes, Aluminium processing: 1, Throuh running machine: HSK F-63, Feeding speed max m/min: 7.5, Pendulum processing: 1800-24000, Number of milling spindles vertical: 1, Tool adaption system: 24, Milling engine 1 hours power: 8, rpm 1): 7, Milling engine 2 hours power: 4, rpm 2): 2, Working widht max mm: 2, Vertical drills-X: 10, Drill vertical Y: yes, Horizontal drills-X: yes, Drill horizontal Y: 100, Aluminium sleeking table: yes, 4 station allocation: yes, Rigging support table: yes, Edgeband hight mm: yes, Radial arm machine: 1 Winkelgetriebe, machine ready for demonstration: Deckenlaser und Hubschwingen, Year :2002

Manufacturer: Biesse, Type: Rover A 1532, Year: 2019, Control: NC BH660, Software: Telesrvice, Working range X: 3140, Working range Y-axis: 1560, Working range Z: 200, C axis: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 13,2, rpm 1): 1000-24000, Tellerwechseler: 8, Pickup Wechlser: 16, Vertical drills-X: 17, Drill vertical Y: 11+6, Horizontal drills-X: 5, Drill horizontal Y: 3, Traverse table: 6, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Year :2019

Manufacturer: Biesse Rover A Nesting, Type: Rover A Nesting, Year: 2020, Control: Biesse, Working range X: 3140, Working range Y-axis: 1580, Working range Z: 230, C axis: yes, Number of milling spindles: 1, Number of milling spindles vertical: 1, Milling engine 1 hours power: 12, rpm 1): 1800-2400, Number of tool changers: 1, Tellerwechseler: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Saw unit: yes, Portal machine: yes, Werkstückspannsystem: Vakuum, machine ready for demonstration: yes, Automatic setting up table: yes, Charging system single-sided: Hubtisch, FREE TEXT: Entladeband + zusätzlicher Werkstückreinigung/genaue Maschinentechnik kommt noch, Year :2020

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006

Manufacturer: Heesemann Cefla Türenlackieranlage, Type: Cefla Robot, Year: 2004, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, by rollers: yes, by scraper: yes, Dry exhauster: yes, Jet dryers (number): Hochtrockner, Sanding machines (number): 1, Brushing machine: no, Design sanding machine no 1: Querband/Längs/längs, Dust exhaust (number): yes, UV dryers - 3 lamps inclined (number): yes 120 Watt, Jet dryers (number): Hochtrockner, High dryers (number): 32, Length of pallets mm: 5500, Feedin speed m/min: 3-6, Year :2004

Manufacturer: Biesse Rover A, Type: Rover A, Year: 2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 145-3685, Min.-max. workpiece height in mm: 6-80, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 12, U/min 1): 1500-24000, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 7, Drill vertical Y: 8, Horizontal drills-X: 4, Drill horizontal Y: 2, raster table: yes, 2 Platzbelegung: yes, Anschläge im Tisch vorne: yes, Vacuum pumps m³/h: 250, Tool clamping system: HSK F 63, Drill vertical: 15, Saw unit: yes, Year :2008

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 3 pieces -Tire size: 250/50-10 SC 10 RIM 6.50F -Rim: Mefro 41042 106 6.50F-10 ET 25 -Bolt circle: Ø 150 x 19 mm -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 450 x 210 mm -Weight: 35 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 10, 4 pieces -Tire size: 4.00-8 SC 10 RIM 3.00D -Rim: Mefro 3.00D-8 603663 ET-10 -Bolt circle: Ø 100 x 16 mm -Hub bore: Ø 60 mm -Delivery/Price: complete -Dimensions: Ø 410 x 105 mm -Weight: 14 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg

Overview The pallet wrapper was built in 2007 by Italian manufacturer Robopac. The machine was used in a water and CSD production plant where it was part of a PET filling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical details Capacity: about 60 pallets by 23 wraps Working hours: 45 363 Pallet top cover function + Upper pressing unit Scope of delivery  Pallet wrapper Belts, rollers Sensors on conveyor belts (infeed, outfeed, diagonal). Spare parts (new and used) Documents

Leftover bread chopper Hommel Rotormat 2000 Super "the universal shredder" Stainless steel version Powerful Connection 400V, 16A-CEE plug Dimensions: 690 x 650 x 1550mm, WxDxH Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: another sieve Delivery service Maintenance contract

Sheeting machine Seewer Rondo SKO 63 for all doughs for rolling out and touring Extendable table left Dough sheeter mobile Connection 400V, 16A-CEE plug Used machine

Sheeter Seewer Rondo SKO 611 for all doughs for rolling out and touring with program control Extendable table left Connection 400V, 16A-CEE plug Used machine

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.