127,361 used machines on RESALE, but how to find them? Machine Search
Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM
Compressor Worthington in very good condition, incl. dryer Description in the annex!
ID3598 Geotec Rotomax L year/Baujahr 2012 Crawler drilling rig, drilling mast stroke length 4300 mm, pulling force 46.5 kN, contact pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shock tongs, support clamp 50-324 mm diameter, cable winch, centrifugal pump, mast extension 810 mm Crawler drilling rig, drilling mast stroke length 4300 mm, tractive force 46.5 KN, pressure 25 kN, mast telescopic travel 500 mm, gearbox flushing passage 100 mm - 5 gears, clamping head diameter 178 mm, clamping and breaking device 0-400 mm, shocking pliers, interceptor clamp 50-324 mm diameter, winch, centrifugal pump, mast extension 810 mm
POWER ELECTRONICS ASSY - CONTROL BOARD FOR FILLING MACHINE VEMAG TYPE 134 ROBBY II - / PC 880 / ARTICLE NUMBER VEMAG: 871.371-004 871.380-002-574733-5LP210695 871.360-102 - 871.360-002 072.999-005 875.821-005 - 871.821-105 871.370-004 - 871.370-701 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
We offer you here a dough Sheeter. Producer: Salem Rondo Type: Combi 613 Dimensions of the straps: - width: 60 cm if interested and for more information we are available.
used
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.
used
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.
Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes
used
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.
The BD Rowa Vmax™ 160 is a modern, fully automated warehouse for pharmacies. With a gripper and the innovative HD Multi-Picking technology, medicines are stored and dispensed quickly, safely and reliably. The system impresses with its maximum efficiency, space-saving design and intuitive operation. Properties: - Year of construction 2023 - Color: White - Dimensions: 412 x 163 x 332 cm (LBH) - Capacity approx. 10,200 – 11,100 medication packs - 2 distribution points - Rear of the system with glass window - Storage on the right front Incl. BD Rowa™ Vmotion: 55" multi-touch monitor in Full HD, capacitive and anti-glare, including wall mount. With this technology, content can be presented in an appealing way and processes can be optimally controlled. It is operated via user-friendly control and operating software, which makes everyday life in the pharmacy easier and a ...
HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...
DH Robotics AG-160-95 Adaptive Electric Gripper with Connector - with Brake Net weight: 1000 g Payload: 3000 g Delivery time 5-10 days! With a stroke of 95mm, the DH Robotics AG-160-95 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or the manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-160-95 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced but advanced gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-160-95 is an adaptive two-finger gripping solution and offers advanced, adaptive gripping at an affordable price. With a recommended payload ...
DH Robotics AG-105-145 Adaptive Electric Gripper with Connector (with Brake) Net weight: 1300 g Payload: 2000 g With a stroke of 140mm, the DH Robotics AG-105-145 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or the manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-105-145 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced but advanced gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-105-145 is an adaptive two-finger gripping solution that offers advanced, adaptive gripping at a price. With a recommended payload of 2 kg and a stroke o ...
DH Robotics CGC-80-10 Centric Electric Gripper - with Brake The DH Robotics CGC-80-10 is an advanced three-finger gripper designed for industrial environments that require precision. With a stroke of 20 mm and a recommended payload of 1.5 kg, the three-finger design of the CGC-80-10 offers the ability to pick up and place hard-to-grasp objects such as those with spherical or cylindrical shapes. The DH Robotics CGC-80-10 offers exceptional ease of use. Plug-ins are available for Universal Robots, OMRON, Hanwha and more. New More details and pictures on request. The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT. Delivery time 5-10 working days!
PLUNGE EDM MACHINE CDM ROVELLA MODEL: BF600 STROKE X: 600 MM STROKE Y: 400 MM STROKE Z: 350 MM CONTROL: HEIDENHAIN SUPPORT SURFACE: 800 X 550 MM TUB SIZE: 1400 X 870 X 500 MM
sed Manesty Rotapress MK IIA rotary tablet press, 45 station, double sided, with pre-compression, keyed upper punches, With feed hoppers, force feeders, controls and associated parts.
Key data: 30 , 13 , 1235
Compresseur WORTHINGTON CREYSSENSAC type Rollair 40 Compresseur à entrainement direct en bon état Puissance moteur : 30 KW Puisance : 40 à 150 ch Pression : de 7,5 à 13 bars Débit : de 265 à 1235 M3/H Année : 2003
Automatic capsule filler Romaco Macofar model MT80 for a produccion up to 80.000 capsule per hour . The machine include format n°2 for pellets
Key data: 30 , 13 , 206
Compresseur WORTHINGTON CREYSSENSAC type Rollair 4000 Compresseur à entrainement direct en bon état
1 Alfa Laval UHT line An Alfa Laval indirect tube UHT system Year of construction 2000 Output 12,000 L7h Compactly positioned on 6 x 4 m" with: a.) Tube heating plant, on frame upright, laterally shielded by Mudguards, temperature up to 145 °C without sterile tank, with low overflow completely piped in the direction of the filling machine, with flow vessel for the return flow. b.) 1 Alfa Laval homogeniser 3 pistons, power as mentioned above. Pressure up to 210 bar. Works in the ascending temperature range around approx. 65 to 85 °C c.) 1 control cabinet with Siemens S 7 control and with complete cabling. The Alfa Laval UHT system is located on the production site in southern Germany and can be visited in the company together with me become.
Man Roland 705 Lacquer Year of Make: 2009 Property Value 90 mil Supply voltage (U) 3-phase, 400 V Frequency (f): 50 Hz Max. motor current (IFLA): 168 A Pre-fuse (according to IEC 60269): 200 A Fuse operating class: gL/gG Short-circuit power: 42 kA, balanced, 400 V max. Control Type: Industrial Control Panel, UL/cUL Certified Control cabinet type: Type 1, Use type 12 Connectors Degree of protection (IP): IP54 (dust-proof, splash-proof) Wiring diagram: 8035963F493 Location marking: Ax Mechanical engineering: High-quality German construction IP54: Dust-proof and splash-proof – industry standard. 200A pre-fuse: High power requirement, large printing machine. 42kA short-circuit power: Control cabinet is designed for high short-circuit currents, very robust. Specifications of the Manroland ROLAND 700 DirectDrive Format & Capacity Maximum sheet size: 740 ...
Mechanical/mechanical clamping system with force transmission, manually operated: mechanical/hydraulic clamping system · Deformation-resistant design for very high clamping accuracy · for use on machining centers with high quality and production performance · Drive spindle with clamping force presetting · grease fittings on both sides for lubricating all guides subject to wear and the spindle thread · Mounting thread M12 for workpiece stop · Stable chip protection prevents chips from penetrating the interior of the body · all guides hardened and ground · Height measurement of base body/workpiece support -0.02 · important for paired use · Supplied with step jaws reversible, hardened and ground. Other technical features: · Version: Model RKE - 3-sided clamping option · Can be clamped horizontally, vertically or laterally - Base body made of steel - hardened and ground - with fo ...
used
Qty 1 x Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears (1:1), cored rolls with rotary joints fitted, auto lubrication system with 45kW AC right angle drive variable speed motor and gearbox, fabricated bedplate. Complete with controls. Also available (if required): Sheet material unwind station (let off stand) Simple Cooling unit In-line cutter Accumulator rolls (wind up)
PLUNGE EDM MACHINE CDM ROVELLA MODEL: ZENIT P1 STROKE X: 1500 MM STROKE Y: 1000 MM STROKE Z: 500 MM C AXIS 10-POSITION TOOL CHANGER MAX ELECTRODE WEIGHT: 2,500 KG MAX. WORKPIECE WEIGHT: 12,000 KG SUPPORT SURFACE: 2000 X 1200 MM TUB SIZE: 3000 X 1500 X 1075 MM CONTROL: HEIDENHAIN MOD. 406
UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE
A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.
Used fermentation cabinet W&P, type: Rollmeister SC 51 -In bakery condition- El. Connection 400 V, 32 A
DH Robotics PGC-50-35 Collaborative Electric Parallel Gripper without Brake Net weight: 500 g Payload: 1000 g With a stroke of 35 mm and a payload of 1 kg, the DH Robotics PGC-50 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking and a host of other features, the PGC-50 is the perfect gripper for light collaborative applications. The PGC-50 is easy to set up and comes with plug-ins for most major cobot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-50 is an electric two-finger gripper designed for both industrial and collaborative applications. The award-winning PGC-50 gripper (Red Dot Award, IF Award) combines progressive design with proven reliability. The PGC-50 offers a stroke of 35 mm and a recommended payload of 1 kg. With its self-locking function, maximum force limits and other collabo ...
Berstorff Rotocure AUMA 20-S Drum dia: 2000mm Drum width: 2600mm Sandvic Steelbelt Description attached!
DH Robotics PGHL-400-80 Heavy Duty Large Stroke Electric Parallel Gripper with Brake Gripping force (per jaw): 140-400N Stroke: 80mm Recommended workpiece weight: 8kg Open/close times: 1.0s/1.1s Repeatability (position): ± 0.02mm Weight: 2.2kg Driving Style: Precise Planetary Gearbox + T-Shaped Lead Screw + Rack and Pinion Size: 194mm x 73mm x 70mm Communication interface: Standard: Modbus RTU (RS485), digital I/O. Optional: TCP/IP, USB2.0, CAN2.0A, PROFINET, EtherCAT. Running noise: < 60dB Rated Voltage: 24V DC ± 10% Rated Current: 1.0A Peak Current: 3.0A IP Class: IP40 Recommended environment: 0~40°C, below 85% relative humidity New
Reference ID: PP-53377 Category: 6 Colors Manufacturer: Manroland Model: 906-6 LTTLV Year Built: 2004 Colors: 6 Impression:- Working Hours: - Speed:- Maximum Size: - Minimum Size: - Condition: Good Location: Europe Availability: Immediately Machine Description Configuration: 6 colors + 2 × varnish Console: RCI console for ink and axial/circumferential control of plate cylinders Multi CCI 2D (spectrophotometric control) Feeder: Pile alignment on feeder Pneumatic side lays Non-stop feeder with swords Sheet decurler Printing Units: Automatic roller wash-up device Automatic impression cylinder wash-up device with brush Roland-Deltamatic damping system TRANSFERTER: Ventury Air Transfer System APL: Automatic plate change Ink temperature control KLH type FS60 Preset automatic size adjustment on feeder and delivery, on pressure ...
left with long band Machine mobile on wheels right band foldable with protective grille
Electric - Hydr.- Machine Vice Offer number: 50105 Make: RÃ?HM Type: 744 - 05 Machine No: xxxx Built: approx. 1993 Technical data: - Electric - Hydr. Machine vice - with separate hydraulic unit - and E. foot buttons for opening and - close the clamping jaws. - Jaw width 200 mm - Jaw height 75 mm - Clamping range approx. 0 - 350 mm - Guide track height approx. 100 mm - Total height 185 mm - separate hydraulic unit röHM , type HA 707 - 80 - Start 400 V / 0.37 kW - Weight approx. 100 Kg - Space requirement approx. L to 850 x W 280 x H 185 mm
The AutoDoor AD100 is a powerful, electrically operated door opener for CNC machines with a stroke of 1000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...
Rochman Stainless shrink tunnel Model: TRX65 Serial: 2511004 Stainless shrink tunnel, stainless mesh belt, belt dimensions 1800mm x 650mm, max product height 400mm, variable speed, variable temperature, 3Ph
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
The AutoDoor AD150 is a powerful, electrically operated door opener for CNC machines with a stroke of 1500 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...
maximum number of results exceeded
please refine your search
