ha ro used for sale

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

Technical Data – Heraeus UT 20 1. Basic data • Model: UT 20 (convection drying oven, Function Line) • Usable volume: 210 litres • External dimensions (W × D × H): approx. 754 × 910 × 720 mm • Internal dimensions (W × D × H): approx. 610 × 672 × 514 mm 2. Temperature range • Working temperature: ambient temperature +20 °C to max. 250 °C 3. Temperature constancy according to DIN 12880 • Deviation at 150 °C (spatial): ± 3 K • Deviation at 150 °C (temporary): ± 0.3 K 4. Electrical data • Power supply: 230 V, 50/60 Hz • Rated power: 2320 W (2.32 kW) • Weight: approx. 100 kg 5. Equipment and construction • Standard: 2 shelves, expandable up to 16 • Stainless steel interior, easy to clean (removable straps, rounded corners) • Circulating air system for even temperature distribution • Microprocessor temperature control (optional: P v ...

table length: 600 mm table width: 380 mm control: FANUC 0-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A fully equipped bistro is available. Components: 1) Dish conveyor dishwasher. 2) Furniture. 3) Small and large kitchen equipment. 4) Customer furnishings such as tables, chairs, and self-service counters. 5) Refrigerators. 6) Deep fryers and grills. 7) Cash registers and scales. 8) Dishes, plates, etc. 9) Extraction and filtration technology. Documentation available. An on-site inspection is possible.

table length: 600 mm table width: 380 mm control: FANUC 16-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Force lower rol upper roll 1178 Ton - Cone bending attachment - Hardned and grounded rolls - Width between upper and lower roll 200 mm - Power 180 kW

Manufacturer: Haas Model: ST-20Y Year of Manufacture: 2016 Voltage: 400V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 27 Amps Largest Load Current: 18 Amps Short Circuit Interrupting Capacity: 10,000 Amps Wiring Diagram Reference: 96-0284 Short Circuit Current Rating: 5,000 Amps RMS symmetrical Find more here - / Contact us at -

CNC lathe Type: ST-20 Y Manufacturer: Haas Year: 2023 Control: Haas Max.turning diameter: 298 mm Max.turning length: 572 mm Swing over support: 533 mm X: 213 mm Z: 572 mm C-axis Y-axis: +/- 50.8 mm Driven tools Tailstock Tool probe X/Y/Z axis rapid traverse - 24.0/12.7/24.0 m/min Spindle cone: A2-6 Max. power: 14.9 kW, spindle drive Vector Drive Max. torque: 203 Nm Max. spindle speed: 4000 rpm Spindle bore: 63.5 mm Automatic hydraulic chuck: 210 mm Turret MBT65 : 12 position Max. speed of driven tools: 4000 rpm Drive of all positions of the BMT65 turret Coolant tank: 208 l with pump El. connection 3x400V/50HZ, 14kVA Machine weight: 5300 kg Linear rollers pre-tensioned axis guide Central automatic lubrication - axes with grease / spindle with oil Lighting of the working space Automatic hydraulic 3-jaw chuck A set of tool holders (only for BOT or HYBRID revo ...

HAAS SL-20 THE CNC turning center was manufactured in 2008 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 262 mm, offers an excellent combination of functionality, productivity and precision. Its extensive equipment includes e.g. a tool probe, an advanced CNC control and a C-axis for machining complex shapes. Over its entire service life, the SL-20 THE CNC lathe has worked for a total of 9586 hours. Technical specifications of the HAAS SL-20 THE lathe - maximum turning diameter: 262 mm - maximum turning length: 508 mm - maximum turning length between centers: 610 mm - maximum spindle rotational speed: 4000 rpm - spindle bore: 52 mm - spindle drive power: 15 kW - lathe chuck diameter: 210 mm - operating hours: 9586 h - power supply of the HAAS SL20 THE machine: 3x 360-480 V; 50/60 Hz Equipment of the H ...

HAAS ST-10 CNC turning center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its compact design and increased production cycle efficiency, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 356 mm are machined inside a large work space by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. All this is complemented by intuitive CNC control with many useful functions. The HAAS ST10 CNC lathe weighs approximately 3600 kg. Technical specifications of the HAAS ST-10 metal lathe - CNC controller: HAAS - maximum turning diameter: 356 mm - maximum turning length: 356 mm - bar diameter: 44 mm - swing over tailstock: 597 mm - swing over cross slide: 413 mm - feed in the X/Z axis: 200/356 mm - rapid traverse in the X,Z axes: 30.5 m/min - maximum spindle ro ...

HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...

HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...

3 assen: Y1 / Y2 / X Capacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton

Height=2.1 m, Overall length= 1.35 m, Overall width= 1.8 m, Net weight= 1353 kg,

Height=1.75 m, Overall length= 0.95 m, Overall width= 1.07 m, Net weight= 480 kg,

Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 400 kg,

Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out  ...

Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible.

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...

Key data: 16000 , 10131 , 150

Presse à injecter HAITIAN 1600 T Type : MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

Manufacturing year : 1992/93 BAR: 1500 KW: 450 RPM: 305 l/min: 150

BAR: 1500 l/min: 71 KW: 230

BAR : 1500 l/min : 52 KW: 160

BAR : 1500-2150 l/min: 19 kw: 102

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...

Manufacturer: Haarsleev Model: Disc Dryer Year of Manufacture: 2019/2020 Decommissioned : December 2024 Drying capacity of up to 50,000 tons of sludge Find more here - / Contact us at -

Harms Wende Schweißtechnik HWG2708SK-01 HW2000 Control Manufacturer: Harms Wende Product Range: Welding Technology Type designation HWG2708SK-01 Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.

Factory no. 021172, table dimensions 6000x2200 mm, feed x 6000 mm, feed y 2200 mm, feed z 1000 mm, spindle speed 0-6000/min, tool magazine 40 pcs, tool weight 25 kg, power 65 kW, weight 47570 kg, Results from the geometric measurements of this machine.

Thermo containers, insulated containers HACCP/ ThermoKuli 60/40cm with fridge or freezer packs large quantities on request

Amsonic Hamo ECS40 Closed circuit cleaning system. Hydrocarbon-based solvent as cleaning medium Medium is distilled internally so that high medium quality is always available Process: Spraying, steam, flooding, oscillating, rotating, ultrasonic, vacuum drying. In any order and intensity.

Linear balance for powders and granules. Weighing takes place directly in the container to be infected (buckets, cans, cups. conversion to bags or sacks possible). Weighing range up to at least 10 KG German make. Very good condition. Partly outdated. Tested and functional. With hopper, about 100 liters, made of flexible material and with punchers to avoid bridging in the hopper. For safe separation organic - conventional, a second, different coloured hopper can be made (additional option). Video link shows a similar machine Subject to prior sale.

Year of manufacture 1985 7 drilling spindles Adjustable drill spindle spacing incl. base electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.

: 3050 mm : 12,0 mm : - : 0,5-3,0 ° : 1000 mm table height: 930 mm work height max.: 930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 1989 4 drilling spindles Adjustable drill spindle spacing electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

The machine is in good technical condition, testing is possible by prior arrangement.

Halter Load Assistent 20 BJ 2014 Few operating hours CE declaration of conformity is available div. CD for installation Operating instructions Electrical schematic

Manufacturer: HACO Model: PPM 30150 Year of Manufacture: 2007 Voltage: 380V 50Hz Capacity : 3000 x 150T Find more here - / Contact us at -

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 190 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 1750 mm Height: 2850 mm Weight: 12 ton

sheet width: 3000 mm plate thickness: 6 mm distance between columns: 3200 mm speed: . m/min rear stop: 1000 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The backgauge is electric. The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution ...

Mixer Manufacturer: Haarup Type: HM300 The mixer was completely renovated, primed and painted in 2020. In addition, a new elevator with elevator bucket was installed in 2020. Blender Manufacturer: Haarup Type: HM300 The mixer was completely refurbished, primed, and painted in 2020. In addition, a new skip with elevator bucket was installed in 2020.

Large working width: 3050 mm for sheet metal (with a strength of 45 kg) up to: 6 mm Clear stand width: 3400 mm Cutting angle adjustable by hand: 0.5 - 3° Number of hydraulic hold-downs: 18 Stroke rate approx.: 9 - 17 /min Stop adjustment: 1000 mm Hydraulic drive: 380 V, 7.5 kW Space required incl. back gauge: 3600 x 1800 x 1580 mm Weight: 5200 kg

Hammer pile driver suitable for HM500 with 120 mm inner diameter, photos are only an example !

sheet width: 3100 mm plate thickness: 10,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 10,00 t dimensions of the machine ca.: m Motorized backgauge up to 1000 mm with digital display Side fence and table extensions Cut length limiter Cut edge lighting Note: Backgauge is slightly inaccurate (+/- 1 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet rack, yard, frame height approx. 3.50m to 4m, truss length: 2.70m, - used - : Price (net) from location: only 950 dismantled, packed and loaded: Manufacturer: Hofe Type: SL 25 / RTS 110 Year of Make: 2013 Frame height approx. 3.50m to 4m Frame width: approx. 10cm Truss height: approx. 10cm Frame bracing: screwed Frame depth: approx. 1.10m Number of frames: approx. 9 pieces Bay load: max. 1,600kg Shelf load: max. 1,440kg Field width: 2.70m Trusses: approx. 40 pieces Incl. push-through protection Condition: good Available: from approx. Mid-November Location: Egelsbach Area FFM

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

240 cm wide, screw-on scraper bar - 152 x 16 mm, double-sided blade, hole spacing 20 cm

180 cm wide, screw-on scraper bar - 152 x 16 mm, double-sided blade, hole spacing 20 cm