ha ro used for sale

A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.

HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...

bore capacity in steel (diameter): 13 mm throat: 180 mm bore stroke: 70 mm morse taper: 2 MK table:: 230 x 220 mm turning speeds: 240 - 3800 U/min engine output: 0,59 kW column diameter: 70 mm dimensions: 600 x 350 x 850 mm weight: 40 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available

Used vacuum filler HANDTMANN, type: VF 50 -completely overhauled- For filling, portioning and twisting. - All wear parts renewed - Oil in the vacuum pump and the hydraulics NEW - Incl. twisting gear - Computer control - Up to 300 portions per minute - Technically very good condition - 6 months warranty Capacity: max. 2,400 kg/h Filling pressure: max. 55 bar Portioning range: 5 - 100,000 g Hopper capacity: 40 / 80 l Visits and test runs are possible by arrangement.

pressure: 100 t chamfer lenght: 2050 mm total power requirement: 11 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: m - ram adjustment: 150 mm - distance ram to table: 400 mm - stroke: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (HxWxD): 1700x1020x800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haco PPM 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 HP Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7,5 ton

Vacuum homogenizing system Make Haagen & Rinau Type Unimix RU IV 200 Net capacity 200lt Stirrer with scraper 1500/300 rpm 3.7/4.4 KW Homogenizer 1500/300 rpm 2.0/2.4 KW Heating by steam double jacket, max 6bar

table length: 600 mm table width: 380 mm control: FANUC 16i-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible.

Built in 1995 Pallet wrapping machine Stretch line Computer control photoelectron. Stack Scanning Drive-on ramp Delivery date: immediately Price on request. We supply and install worldwide.

Düperthal Safety Cabinet Type 90 W x D x H 120 x 60 x 206 cm Price incl. VAT You will receive an invoice with VAT. Shipping possible !

A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.

HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use

1000L Stainless Steel Tank | Forming Technology Hausach | UN Approval | V4A 1.4571 | used For sale is a used 1000 liter stainless steel tank from the company Umformtechnik Hausach GmbH. The tank is made of high-quality stainless steel 1.4571 (V4A, AISI 316Ti) and has UN approval (UN 31A/Y/11) for the storage and transport of dangerous goods. Ideal for applications in the food industry, chemical, agriculture or industrial storage. The tank is in well-maintained condition, tight, clean and ready for immediate use. It has a sturdy tubular frame construction with forklift pockets and a secured dome lid. ⸻ Specifications: • Capacity: 1000 liters • Material: Stainless steel 1.4571 (V4A, acid & chemical resistant) •Ab. Total weight: 2100 kg • Curb weight: 228 kg • Minimum wall thickness: 1.5 mm •Ab. Filling/emptying pressure: 0.10 bar • Test overpressur ...

The machine is in good technical condition, a test run is possible by prior arrangement.

x-travel: 1016 mm y-travel: 660 mm z-travel: 635 mm control: Haas table surface area: 1.372 x 610 mm table load: 1.814 kg rapid traverse: 18 m/min turning speed range: 7.500 U/min power capacity - milling spindle: 22,4 kW tool taper: SK 50 | no. of tools in the magazine: 30 Stück weight of the machine ca.: 7,5 t dimensions: 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mm y-travel: 660 mm z-travel: 635 mm control: Haas table surface area: 1.372 x 610 mm table load: 1.814 kg rapid traverse: 18 m/min turning speed range: 7.500 U/min power capacity - milling spindle: 22,4 kW tool taper: SK 50 | no. of tools in the magazine: 30 Stück weight of the machine ca.: 7,5 t dimensions: 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 190 mm centre hight with tailstock - Oil dust collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 t, 30000 mm

The machine is in good technical condition, inspection and test drive is possible by prior arrangement.

Electrically heated process vessel capacity 90 litres Filling device Manufacturer: Haas Type FMSX composed of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.

Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...

HAMBURGER LINE – HANDTMANN VF-612 + VERBUFA TYPE MBF-1 MACHINE AFTER GENERAL OVERHAUL YEAR OF PRODUCTION 12-2012 – START 2013 CURRENTLY UNDER TECHNICAL INSPECTION CONDITION OF NEW MACHINES WARRANTY FOR COMPONENTS AND MECHANICAL PARTS 3 - MONTHS

Availability: as of now Current format: 170 x 92 x 25 mm Performance: 40 cycles Step offshoot: yes Gluing machine: on request Machine is in good and functional condition according to its age

• Manufacturer: Hang (Constantin Hang GmbH) • Model: DT 106 (also known as 106 DT) • Machine Type: Paper Drilling Machine / Paper Punching Machine • Drilling spindles: 2 pieces, adjustable • Drilling diameter: 3 – 20 mm (standard up to 14 mm, optionally with hollow shank up to 20 mm) • Table size: approx. 110 × 68 cm (width × depth) • Max. drilling distance from the edge of the paper: up to 470 mm (face hole approx. 300 mm) • Max. stacking height: approx. 70 mm • Operation: Foot pedal (electric) • Connection: 380–400 V three-phase (3-phase) • Machine weight: approx. 250 kg • Condition: Used, technically checked, ready for immediate use

used sourdough machine Isern Häger 600 RMS, for 1000 liters, in bakery condition (good condition), Masch.-Nr. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg

For sale: B100-S2 Dry Self-Priming High-Pressure Diesel Engine Pump, The powerful, compact and versatile solution for all your pumping work., , ✓ Ready for immediate use | ✓ Robust & reliable | ✓ High capacity & delivery head, , Are you looking for a powerful, self-priming diesel engine pump that effortlessly moves large quantities of water and is also suitable for a wide range of applications? The B100-S2 is exactly what you need., , Technical specifications, Type: B100-S2, , Pump type: Dry self-priming high-pressure diesel pump, , Capacity: Up to 120 m³/hour (see pump curve), , Delivery head: Max. 70 meters (see pump curve), , Engine: Hatz diesel engine, 39 kW at 2900 rpm, , Fuel tank: 300 liters (max. 30 hours at full load), , Fuel consumption: Approx. 10 litres/hour, , Connections: 4” flange (pressure & suction), , Dirt passage: 29 mm, , Dimensions (LxWxH): 2520 x 1200 x 181 ...

Ösmaschine / Eyeletting machine Hang 103LOKSerial-No. 24707

Nietmaschine / Riveting machine Hang 162-01Serial-No. 39709

Entionisierung – Entladenetzteil / Deionization – Discharge power HAUG EN-8 Baujahr / Year 2004 - Serial-No. 933594/40 2 Stäbe, Länge jeweils 70cm lang / 2 Rods length each Rod 70 cm long zum Entfernen elektrostatischer Ladungen /  for removing electrostatic charges Funktionsprinzip Die anliegende Netzspannung wird durch einen Hochspannungstransformator auf 7–8 kV Wechselspannung transformiert. Die im Sekundärbereich integrierte Funktionsüberwachung meldet die Unterschreitung der Koronaeinsatzspannung (= Wirkungsbeginn von Ionisationsgeräten) durch Blinken der Kontroll-LED. Operating principle The applied mains voltage is transformed to 7-8 kV AC voltage by a high-voltage transformer. The function monitor integrated in the secondary section signals that the corona inception voltage has been undershot (= start of effect of ionizing units) by flashing the control LED.

Ösmaschine / Eyeletting machine Hang 103 SP SN. 14889 Serial-No. 14899 Fußbetrieb / Foot operation

Travel X/Y/Z: 1000mm/600mm/630mm, table dimensions X/Y: 1150mm/600mm, max. table load: 700kg, rapid traverse: 20m/min, speed: 10000rpm, tool positions: 24, machine dimensions X/Y/Z: approx. 2950mm/2650mm/2850mm, weight: approx. 5300kg, control: Mitsubishi Meldas. On-site inspection is possible.

cutting diameter: mm saw band length: mm table height: mm weight of the machine ca.: 3 t dimensions of the machine ca.: m Dimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’ Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’ Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Automatic band saw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Type: PEHAKAMAT 360 ZP Year of manufacture: 2000 Saw blade: 5.600 x 41 x 1,3 mm Working range: 90° round 360 mm 90° square 360 x 360 mm Special features: roller conveyor 1,300 x 380 mm hydr. belt tensioning Dimensions Weight: 3 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rectifieuse par coordonnées CNC HAUSER S40-400 CARACTÉRISTIQUES TECHNIQUES: Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] INFORMATIONS COMPLÉMENTAIRES : x1 pack H ...

Rectifieuse par coordonnées CNC HAUSER S40 400 CARACTÉRISTIQUES TECHNIQUES : Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Csbn Ua Hjwu Dwpe Rwjrd Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] ÉQUIPEMENTS INCLU ...

HALLA Diesel Forklift HDF 25 Nominal load capacity 2500 kg at 500 mm LSP Triplex full free-lift frame: lifting height 4500 mm, overall height 2130 mm, free lift 1140 mm Fork length 1000 mm Sideshift Superelastic tyres Wadler/Hydrostat KIA diesel engine Total weight approx. 4300 kg Forklift is BAV tested. Roadworthy. Can be redeemed.

Siemens 840D Control - Iemca Boss 545E-r/32 barfeed - Nanocool CIL750 A-CT oil cooler - machine has worked with oil

A 2-roller Höfer glue spreader is available. Working width: 800mm, rollers: 2. On-site inspection is possible.

Key data: 40 t, 2000 mm

Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm

Inv. Num. : 8525 Type: LG 1000 Producer: Hartford Created: 2017 Parameters: Control system: FANUC AI 100 Hours: 9285 h Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm

This Eisele Waterpump BSD442, Can be used for the emptying and cleaning of pits, ponds, mine shafts and similar tasks,, for reducing ground water, pumping out water ballast from ships, on building sites, in, stone and gravel quarries and building material works., For municipalities and industrial concerns., , Throughput capacity: 100 m3/h, Max dirt passage: 19 mm, Max. head: 6 MWK, Max dirt passage: 1750 rpm, Weight: 1600 kg, , = More information =, , Year of manufacture: 1999, Applicable material: Water, Empty weight: 1.400 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.n ...

Internal threading machine Hagen & Goebel type HG 124Masch. No. 4112 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M15Cutting capacity in brass M3 to M17.5Throat depth 250 mmPine stroke 80 mmTable size 345 x 245 mmSpindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kWNerg connection 380 volts, 50 Hz- 6 speed levels via belt change (3 steps via belt + 2 motor speeds)- thread pitch via guide cartridge- 2 pieces guide cartridges with 0.8 mm and 28 G

L + Z lathe COLCHESTER / HARRISON type Student 1800Masch. No. 4/0023/08817 Year of construction approx. 1985Center width 635 mmTurning diameter over bed 330 mmTurning diameter over face slide 210 mmCenter height over bed 165 mmCenter height over face slide 105 mmSpindle bore 42 mmFeed longitudinal and planeChuck intake Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Quill adjustment 110 mmSpindle speed 22 - 1800 rpm. 16 stepsDrive power 2.2 kWWetz connection

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

ESD-Electrostatically protected workbench, workbench HANDKE Industrie TechnikSingle workstation E(lectro) S(tatic) D(ischarge)Table length: 1100 / 1700 mmTable depth: 600 mmTable length Folding table: 600 mmWorking height: from 830 to 1200 mm- Volume-conductive ESD tabletop: 40 mm- Table top with hydraulic lifting system- Height adjustment via hydraulic pump by hand crank - Stable base frame made of aluminium system profile- Rear wall plate with standard square perforations- 1 piece drawer compartment W x D x H = 675 x 210 x 80 mm - 1 piece

Hydraulic Cylinder Double-acting HÄNCHEN Type ServoslideFlange Cylinder, Ideal for Workshop PressSeries No.: S004420 Year of Manufacture 2010Cylinder Stroke: 400 mmOperating Pressure: 300 barPiston Rod: 160 mmPiston Diameter: 220 mmCylinder Press Force at 300 bar: 114 Tonflange Outer Diameter: approx. 400 mm with 16 Bores 24.5 mmTotal Length Piston Rod Retracted: approx. 1230 mm (with the Wheel Measuring Cell)Total Length from Flange to Cylinder Upper Edge: approx. 750 mm- Hydraulic Connection Thread G 1 1/4 - Thread on the piston rod M150 x 3 mm