ha ro used for sale

Handtmann VF 612 Filling - Portioning - Turning Off Year of construction 2009 Price on request

Handtmann VF 628 Filling - Portioning - Turning Off Year of construction 2009 incl. Wolf GD93-5

Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request

with feeding Filling - Portioning - Turning Off MC Control Price on request

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm

Key data: 75 KW, 400 V

Combined heat and power plant (CHP) HBG 75 – Electric hail – 75 kW – YOC 2014 For sale is a combined heat and power plant type HBG 75 – E 0836 TE312 from the manufacturer Elektro Hagel, built in 2014. Technical data: Manufacturer: Elektro Hagel Type: HBG 75 – E 0836 TE312 Year of Make: 2014 Operating hours: approx. 65,000 h Engine: Gas gasoline engine, four-stroke Generator: Leroy Somer LSA 44.2 M95 C6S/4 Generator type: air-cooled synchronous generator Voltage: 400 V Electrical power: 75 kW Thermal power: 93 kW Total rated heat output: 196 kW Equipment: Launch system Gas pressure regulator and safety range Switchgear with PLC control Flue gas system with heat exchanger (AWT) Soundproofing Condition & History: Approx. 65,000 operating hours All maintenance was carried out regularly by a specialist company The  ...

Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Cylinder head to Hanomag diesel engine

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

Second-hand machine type Pester Pewo pack 450 Pester PEWO-Pack 450, built in 2003 only 2700h operating hours For tightening insulating individual and collective containers with PE film in the pharmaceutical cosmetics and food industry The technically high-quality series equipment includes: - compact and stable design in modular design - Control console with 4-line plain text display for the following, piece counter, speed display, hour counter, temperature monitoring, general fault indicator - Wear-free, infinitely adjustable, patented tightening system - Product protection by means of safety monitoring by means of light barriers in the closing area - Film monitoring, advance warning with optical and acoustic display as well as machine stop at the end of the film or film tear - Single aeration - Machine mobile, i.e. it has steering and buck rollers for internal transport, ...

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

Code 9602 DESCRIPTION Vertical JIG Grinder Make HAUSER Modell 3 SMO Serial No. 257 Machine No. 1519-2564 Table surface 600 x 320 mm Table movement longitude (X) 400 mm Table movement cross (Y) 250 mm Max. grinding diameter Ø 190 mm Column-Spindle 300 mm Max. height under spindle 500 mm Vertical movement spindle 90 mm Vertical movement grindinghead 500 mm Max. speeds grindingspindle up to 80.000 omw./min Weight 2000 kg Total power 6,6 kW – 380 Volts Accessories Grinding spindles, etc. Condition Machine is in good condition

; Gross weight [kg]: 1730; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 620; Maximum lift capacity [kg]: 350

; Gross weight [kg]: 2330; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450

working length: 2451 mm Working width: 1670 mm Working height: 800-1000 mm Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinst ...

Loading caterpillar Hanomag D 600 functional, top engine

; Gross weight [kg]: 7040; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 7300; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 8120; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 11710; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

working length: 3100 mm Working width: ca. 3400 mm Working height: 750 - 1000 mm Haberkorn return means for Umfälzautomat For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts  ...

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amplification -fold: ? diameter: 380 mm workpiece height max.: 200 mm voltage: 230 V weight of the machine ca.: 245 kg dimensions of the machine ca.: 0,80 x 1,20 x 2,00 m - Serial-No.: 1740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread packaging machine Hartmann VS 310 Series: M86/ 211L Year of construction: 12/1993 Weight: 850kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1340SF50VASF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1360 mm -Weight: 5.3 kg

sheet width: 2500 mm plate thickness: 30 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210015 Type of machine Hydr. 3-roll bending machine Make HAUSLER Type RMA 2500/30 Build in 1962 Type of control conventional Additional information max. widht 2500 mm Max. plate thickness 30 mm 3 rolls diameter upper oll 450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1380 mm -Weight: 5.0 kg

faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Machine Details Warehouse number 1105-03409 Machine Type Machining Center - Vertical Brand MIKRON - HAAS Type VCE 1000 VF 3 Year of construction 1998 Control type CNC Control Haas Storage location FRANCE Country of origin USA Delivery time immediately Freight base EXW (Incoterms 2010) Technical details x-displacement 1016 mm y-way 508 mm z-way 635 mm Control Haas Table clamping surface 1219 X 457 mm Rapid speed 25 m/min Table load 1000 kg Speed range 7500 1/min Drive power - Milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Information IMMEDIATELY FREE IN GOOD CONDITION UNDER POWER

Key data: 30 , 1500

Generator Motor 32 KW at 15001 rpm

Handtmann Vacuum Filler Type: VF200 Funnel Capacity: 90\240(liters) Total power: 7kW Filling Capacity: Max 5000kg/h Serving: 5 - 100,000 grams Unscrewing machine Frame loading for 200l trolleys Power Supply: Electric, 400V 50Hz 3N Stainless, acid-resistant steel External dimensions: 1500 mm x 1200 mm x 1900 mm Condition: Used / Device fully functional We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Henri Hauser M5 DR Coordinate Drill Spindle diameter 90 mm x-displacement 700 mm y-way 500 mm Drilling capacity in steel 40 mm Spindle holder MK 4 Drilling spindle stroke 170 mm Number of spindle rotations 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimensions - longitudinal 900 mm Table dimension - transverse 770 mm Vertical path of the cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Passage between the stands 900 mm Passage between spindle and table 815 Spindle motor 4.0 hp Total power requirement 380 V Machine weight approx. 3.9 t Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1290 mm -Weight: 4.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1230AOLSF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1240 mm -Weight: 5.1 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1350AOLSF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1350 mm -Weight: 5.2 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx2180AOLAOL45 -Hydraulic hose: HD240T 90 BAR -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 2020 mm -Weight: 7.1 kg/piece

Safety control, safety door switch, switch buffer, bumper, safety contact buffer -Manufacturer: Haake, switch buffer - bumper -Type: HSB 1112-10 -Voltage: 50 V AC, 75V DC -Price: per piece -Number: 2 pieces -Dimensions: 2830/180/H110 mm -Weight: 7.2 kg/piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: Hasco, high-performance cartridge heater -Item No.: 277202 10 x 100 mm -Power: 400W 220V -Dimensions cartridge: O 10 x 100 mm -Weight: 0.1kg

machine measurements: 9.657 x 1.472 x 1.985 mm machine weight: -- kg power capacity: -- kW Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM

Hartmann bread slicer and packaging line Hartmann Slicer SL 20 Year of construction 1998 Hartmann Automat GBK 220 Year of construction 1991 Bread slicer and packaging line Compact for whole breads and individual slices with closure Digital Screen Panel with air/compressor connection with new knives 230/400V 50Hz Total Kg: 1800kg 2 whole lines in stock! Directly from the bakery

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1080SF50VASF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1100 mm -Weight: 4.5 kg

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg