130,509 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 135 mm thread dia.: M 20 mm spindle turning speed range: 72 - 2600 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MT 3 table surface area: 370 x 360 mm Distance spindle/table max.: 850 mm distance spindle/base plate: 1400 mm voltage: 400 V / 50 Hz total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 0,7 x 2,3 m • with cooling device • threading attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mm plate thickness: 1,5 mm distance between columns: 2050 mm Daylight opening: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2,7 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10500 mm y-travel: 2750 mm y-travel: (3350) mm z-travel: 1500 mm turning speeds: 3500 U/min Tool changer: 80 Control: Heidenhain TNC 430 M positioning accuracy: 1 ° milling-head swivable +/-: CNC Plate area: 12000x2500 mm chip conveyor: spindle taper ISO: 50 Spindle capacity: 37 KW Feed: 6000 mm/min Rapid movement: 15000 mm/min total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 18,1x6,7 m CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Name: CNC control unit / control unit Name: HURCO CNC Control Unit Manufacturer: HURCO Companies, Inc. (USA) Serial Number: U4M01003112D Type: Control Unit / Control Kit Dimensions (estimated): approx. 440 × 360 × 160 mm Weight: approx. 15 kg Country: USA Short Description: HURCO control unit with several plug-in cards, including RAM and interface boards as well as connections for COM, I/O and other interfaces. The device is designed for industrial use in CNC milling machines or machining centers. The rugged aluminum chassis features two active fans for internal cooling, as well as numerous I/O ports (Sub-D and Centronics). There are several signal connectors on the front and back, as well as internal expansion slots for additional modules.
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 mm work table:: 170x125 / 265x150 mm total power requirement: 0,5 kW weight of the machine ca.: 26 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 3100 mm Working width: ca. 3400 mm Working height: 750 - 1000 mm Haberkorn return means for Umfälzautomat For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts ...
grinding wheel diameter: 300 mm no. of working stations: 2 Stück manually feed: ja 0 max. width of grinding wheel: 50 mm grinding wheel hole diameter: 25 grinding wheel speeds: 1420 U/min voltage: 400 V / 50 Hz total power requirement: 2 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 0,6 x 0,5 x 1,2 m • Work bench grinder with a disk diameter of 300 mm, • We are able to supply an under frame additionally, similar in execution as shown in the picture, additional price: EUR 210.00. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fume Hood 1200mmL x 800mmD x 2400mmH
plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Clark-Hurth Spicer 13.5 HR 28369-1 Gearbox is a heavy-duty transmission system for industrial and off-highway applications. Known for its durability, high torque capacity, and reliable performance, this gearbox is widely used in construction equipment, material-handling vehicles, and other demanding industries. Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency Additional Information PDF Brochure Available (Contact us for details) Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency ...
Hydraulic oil cooler AC-M3 High efficiency and stability: Under the action of the fan, the air is used as the cooling source to force the heat away so as to obtain the cooling effect of low cost and high efficiency and the best radiator. The AC-M3 is an industrial hydraulic oil cooler equipped with a 24-volt DC motor. This cooler is specifically designed for use in mobile machinery such as cranes, concrete pumps, and earthmoving equipment. The cooler ensures efficient cooling of the hydraulic system oil and keeps it at an optimal temperature. Nebmev D Dubsy Ex Ipscu Specifications: Cooler type: AC-M3 Voltage [V]: 24 Liquid flow rate [l/min]: 180 Airflow [m³/h]: 1860 Fan motor power/current consumption [kW/A]: 0.35 / 13.5 Recommended fuse [A]: 20.0 Fan diameter [mm]: 305 Noise level (at 1 meter) [dB(A)]: 78.0 Volume [l]: 3.2 Weight [kg]: 14.6
thickness of jaw: 140 mm clamping range: 140 mm clamping height: 50 mm weight: 17 kg dimensions: 500 x 290 x 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 820 mm table width: 520 mm stroke height: 730 mm weight max. in kg: 300 kg : 260 mm weight of the machine ca.: 0,065 t dimensions of the machine ca.: 1,0 x 0,6 x 0,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 33 m/sec total power requirement: 4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Folding stations: 1st folding unit with 6 pockets (parallel folding) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel folding) - Max. sheet format: 520 x 840 mm - Min. sheet format: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on folding pattern and material) - Paper weight: 40 – 250 g/m² - Fold types: single fold, wrap fold, zigzag fold, double parallel fold and much more - Feeder: Flat pile feeder (PBA) - Control: Electronic control with folding program memory - Delivery: Shed delivery (STA) - Optional: Perforating, creasing or cutting units (depending on equipment) - Format adjustment: Manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Particularities: - Solid construction with high precision - Suitable for ...
range L-W-H: 780 x 480 x 1050 mm weight: 79,5 kg : 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 , 3/8, 1/2 . Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 745 x 525 x 915 mm weight: 93,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 120/85 L/min Receiver capacity: 30 Liter weight of the machine ca.: 50 kg. Number of cylinders: 2 0 motor: 230V / 0,75KW V / KW range L-W-H: 570 x 640 x 800 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 5552 Type: BMC 24 SSM Producer: HURCO Created: 2004 Parameters: Control system: ULTIMAX Work table length: 760 mm Work table width: 400 mm Spindle drive power: 7.5 kW Tool magazine: 24 pieces Speed: 80-8000 1/min Travel X-axis: 610 mm Travel Y-axis: 405 mm Travel Z-axis: 505 mm Cone: SK40 Machine height: 2650 mm Machine length: 2140 mm Machine width: 2100 mm Machine weight: 4200 kg
width of the strips: 100 mm band length: 1220 mm band speed: 1140 m/min. : 0,62 x 0,4 x 0,35 cm total power requirement: 1,5 kW weight of the machine ca.: 0,04 t dimensions: 0,97 x 0,67 x 0,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 1045 x 5050 x 1010 mm weight: 100 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
