h und k used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 25 mm -Diameter eyes: 22 mm -Stroke: 202 mm -Dimensions: 455/83/H95 mm -Weight: 8 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 142 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 425/60/H60 mm -Weight: 4.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Diameter eyes: 22/20 mm -Stroke: 40 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 445/85/H110 mm -Weight: 7.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 40 mm -Stroke: 82 mm -Piston rod holder: Ø 25 mm -universally applicable -Number: 2x cylinders available -Price: per piece -Dimensions: 465/150/H120 mm -Weight: 17.9 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 55 mm -Piston rod: Ø 30 mm -Diameter eyes: 25/25 mm -Stroke: 57 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 390/70/H105 mm -Weight: 7.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 90 mm -Piston rod: Ø 40 mm -Diameter eyes: 35/35 mm -Stroke: 55 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 555/210/H110 mm -Weight: 16 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 75 mm -Piston rod: Ø 40 mm -Stroke: 120 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 485/105/H105 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 355/80/H50 mm -Weight: 3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston Ø: approx. 80 mm -Piston rod: Ø 32 mm -Stroke: 148 mm -Number: 2x available -Price: per piece -Dimensions: 600/135/H135 mm -Weight: 13 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: drill holes -Width: 395 mm -Length: 495 mm -Height: 30 mm -Weight: 53.5 kg

3,650 mm high, 870 mm deep // trusses: 2,880 mm // shelf load: 1,600 kg Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 12,020 mm Number of fields / row of shelves: 04 pcs á 2,880 mm Number of levels plus floor level: 03 pcs. The scope of delivery includes: 05x Pallet racking stand, used Material color: green Stand profile: C 100 x 50 x 3 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 3,650 mm high 870 mm deep incl. load distribution plate, used Total length: approx. 930 mm Inner width: approx. 102 mm 24x pallet rack beams, used Material color: green INP profile: 80 x 42 mm Clear width: 2,880 mm max. load per pair of trusses 1,600 kg at the same time. distributed load 48x locking pins, use ...

3,650 mm high, 870 mm deep // trusses: 2,880 mm // shelf load: 1,600 kg Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 17,980 mm Number of fields / row of shelves: 06 pcs á 2,880 mm Number of levels plus floor level: 03 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material color: green Stand profile: C 100 x 50 x 3 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 3,650 mm high 870 mm deep incl. load distribution plate, used Total length: approx. 930 mm Inner width: approx. 102 mm 36x pallet rack beams, used Material color: green INP profile: 80 x 42 mm Clear width: 2,880 mm max. load per pair of trusses 1,600 kg at the same time. distributed load 72x locking pins, used  ...

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 93 mm -Stroke: 800 mm -Total length when retracted: 985 mm -Dimensions: 985/93/H93 mm -Weight: 32 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 120 mm -Piston rod: Ø 36 mm -Stroke: 200 mm -Price: per piece -Number: 3 pieces -Dimensions: 755/120/H120 mm -Weight: 20.8 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

Hydraulic pump, oil pump, gear pump -Internal gear pump -System: Trochocentric -Operating pressure: 175 bar -Delivery rate: 25 cm³/rev -Dimensions: 180I168/H135 mm -Weight: 6 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Hardness tester Wolpert Testor HT 2001 Year of manufacture 1979 Hardness testing Rockwell Brinell Vickers Weight 185 kg Data Adjustment tool Unchecked!

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Hoffmann frame and slotted hole drilling machine Product name: Frame and slotted hole drilling machine Type: HR 150 Manufacturer: Hoffmann Bohrsysteme Machine number: 15306 Year of construction: 1996 Condition: used, revised, checked Technical details: - Machine height: 1,260 mm - Machine length: 1,100 mm - Machine depth: 1,300 mm - Workpiece support: 1,100 x 240 mm - Workpiece clamping: pneumatic via foot valve - max. clamping height: 150 mm (standard) - Stroke of the clamping cylinders: 10 mm - Drilling plane adjustment (Z-axis): 100 mm (pneumatic) - Drilling stroke (Y-axis): 150 mm - lateral adjustment range of the drilling unit (x-axis): 330 mm - Drill holder: Special chuck with 2 tool change inserts (1x M10 and 1x 1600) - Drill with centering tip: - 2 pieces 8 x 50 mm, 1 piece 12 x 80 mm, 1 piece slotted hole drill 8 x 20 mm - Drill speed: 2,850 rpm -  ...

Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts

Hitachi HPLC System LaChrom Elite -Power Box -L 2130 Gradient Pump -L 2300 Column Thermostat -L 2200 Autosampler (cooling) -L2455 DAD Diode Array Detector

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 2000 kg -Chain length: 2.5 m -Dimensions: 730/230/H170 mm -Weight: 16.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 70 mm -Piston rod: Ø 40 mm -Stroke: 360 mm -Total length retracted center center hole: 725 mm -Recording piston rod: Ø 35 x 25 mm -Recording cylinder: Ø 35 mm x 25 mm -Dimensions: 815/70/H90 mm -Weight: 15 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 80 mm -Piston rod: Ø 40 mm -Stroke: 138 mm -Holder: Ø 35 x 25 mm -Dimensions: 530/80/H115 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function:single acting -Piston diameter: 90 mm -Piston rod: Ø 55 mm -Eye diameter: Ø 35 mm -Stroke: 490 mm -Number: 4x available -Price: per piece -Dimensions: 820/110/90mm -Weight: 22kg

Hydraulic oil tank -Tank height: 200 mm -Tank capacity: 3.6 L. -Dimensions: 190/350/H290 mm -Weight: 5 kg

2 pieces Hohner head mounts (suspension) for Theisen & Bonitz Booklet Maker Price per 1 pc. Art.: PS3135

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 28 mm -Diameter eyes: 25/35 mm -Stroke: 44 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 495/95/H105 mm -Weight: 9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 12 mm -Stroke: 60 mm -Admission piston rod: M12 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: Ø 55/H250 mm -Weight: 3 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 19 mm -Stroke: 105 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 390/90/H55 mm -Weight: 2.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 80 mm -Piston rod: Ø 35 mm -Stroke: 130 mm -Number: 1x available -Price: per piece -Dimensions: 470/170/H95 mm -Weight: 11.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Stroke: 138 mm -Number: 1x available -Price: per piece -Dimensions: 620/80/H95 mm -Weight: 12.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 70 mm -Piston rod: Ø 25 mm -Diameter eyes: 30 mm -Admission shaft: M24 -Stroke: 77 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 635/105/H80 mm -Weight: 8.7 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 480/145/H130 mm -Weight: 19 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: Ø 50/H445 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 90 mm -Piston rod: Ø 40 mm -Diameter eyes: 40/40 mm -Stroke: 75 mm -Number: 4x cylinders available -Price: per piece -Dimensions: Ø 105/H555 mm -Weight: 18 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 125 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: Ø 95/H575 mm -Weight: 19 kg

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg

Radial piston motor, hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 34 mm -Flange: Ø 180 mm - Universally applicable: -Number: 1x motor available -Price: per piece -Dimensions: Ø 205/258 mm -Weight: 23 kg/piece

Hydraulic pump, oil pump, gear pump -Power: 0.25 kW 2820 rpm -Protection class: IP 55 -Dimensions: 370/190/H190 mm -Weight: 10 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 22 mm -Stroke: 700 mm -Dimensions: 118/71/H915 mm -Weight: 10.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 25 mm -Diameter eyes: 25/30 mm -Stroke: 90 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 62/62/H330 mm -Weight: 5.1 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder comes from a Hitchi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 50/50/H720 mm -Weight: 4 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg