h und k used for sale

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Transmitter -Manufacturer: Endress Hauser -Type: FTC 282 -Number: 2x devices available -Price: per piece -Dimensions: 60/170/H135 mm -Weight: 1.1 kg

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

DC brake, braking device, electric motor brake -Manufacturer: HORSTMANN Antriebstechnik -Type: AER 4-008-39-0064 -Current: 150/100 Amps -Operating voltage: 400 V AC 50/60 Hz -Quantity: 1x power supply unit included -Dimensions: 115/230/H200 mm -Weight: 4.8 kg

Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Quick-change attachment for wheel loader buckets, screening buckets, stone buckets, shovels, sorting buckets -Quantity: 5 pieces of various types -Number: 5 different manufacturers -Sale: only complete set -Price: complete -Total weight: 136 kg

SOS Block bottom bag machine TRIUMPH I, 1 ply, 4 colours, photo cell, Tube width 3-7,5 cm, Tube length 12-34 cm, Bottom width 5-12 cm, machine ready for test production

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Material: Steel -Dimensions: 245/202/H130 mm -Wall thickness: mm -Weight: 28 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Dimensions: 153/76/H132 mm -Weight: 6 kg

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -Dimensions: 151/78/H132 mm -Weight: 6.2 kg

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Pallet wrapper, stretch machine for pallets, second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust device! Type HAD 1500 Completely overhauled by the manufacturer Equipment of the machine: Electrical control system completely overhauled (frequency converter) Foil brake (magnetic particle brake newly powder-powdered) adjustable Foil carriage restored Photocell for pallet height scanning Manual Functions Turntable remounted Drive-on ramp used Additional design: with wheelchair access (can be moved with forklift) Condition: very good Available: now Location: 91177 Thalmässing

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 560 mm -Dimensions: 625/855/H210 mm -Weight: 6.3 kg

Fire basket, fire baskets, fire pit, fire bowl, -Triangle -Material: Steel -painted: Black -Number: several baskets available Price: per piece -Dimensions: 570/570/H570 mm -Weight: 18 kg

Fire basket, fire baskets, fire pit, fire bowl, -Around -Material: Steel -painted: Black -Number: several baskets available -Top diameter: 600 mm -Diameter at bottom: 380 mm -Dimensions: 600/H380 mm -Weight: 16 kg

Fire basket, fire baskets, fire pit, fire bowl -Square -Material: Steel -painted: Black -Number: 2 baskets available -Price: per piece -Dimensions: 500/500/H560 mm -Weight: 22 kg

Lockable stainless steel container, stainless steel pot, stainless steel cooking pot -Stainless steel: Stainless steel pot -Internal dimensions: 375 mm -Depth: 310 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 400/H310 mm -Weight: 2.4 kg

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 650 mm -Dimensions: 850/955/H335 mm -Weight: 13.7 kg

Stainless steel chimney cover, chimney cowl -Inside bracket spacing: 460 mm -Dimensions: 755/1065/H400 mm -Weight: 14 kg

Stainless steel VA chimney cover, chimney hood -Hole spacing: 135 x 385 mm -Price: per piece -Number: 2x available -Dimensions: 655/730/H170 mm -Weight: 4.7 kg

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 610 mm -Length: 2900 mm -Height: 55 mm -Working height: 185 mm -Plate: with support ribs -Groove width: 18 mm -Dimensions: 2900/610/H185 mm -Weight: 874 kg

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Used vacuum filler HANDTMANN, type: VF 628 with lifting device -partially overhauled- - for filling, portioning and twisting meat or dough products - Microcomputer controller PCK-4 - New colour display - Funnel divisible - with lifting device - Filling capacity: up to 6,000 kg/h - Maximum filling pressure: up to 72 bar General overhaul - New conveyor curve - new sprocket - Lifting device remounted - new chain - all bearings new The machine is in very good condition. Viewing and test run are possible by arrangement.

Transport trolley with 2 trays -Stainless steel tub dimensions: 600/400/H220 mm -Design: stable -Dimensions: 540/725/H800 mm -Weight: 30 kg

Reference Num.: 4103 Brand: Heidelberg Type: SM 102-2-P Construction year: 1998 Impressions: 477 mio Size: 720 x 1,020 mm Available: directly Status: Not in production Location: Malaysia Sheet size: min 280 x 420 mm, max 720 x 1,020 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 41.14 mm Machine size: Length: 6,680 mm, Width: 3,160 mm, Height: 2,170 mm Total weight: kg 16,900 / lbs 37,258 Equipment: - CPTronic - WEKO Puderapparat T66

Sales counter, counter, stainless steel, cabinet, work table -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 1320 mm -Length: 3530 mm -Height: 830 mm -Plate thickness: 75 mm -Plate: with support ribs -Groove width: 23 mm -Weight: approx. 3500 kg

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50/60 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 3x motors available -Price: per piece -Dimensions: 255/155/H155 mm -Weight: 8 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg

Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30

Milling machining center CNC Hedelius Tiltenta T7-4200

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

Light mark projector for flame cutting machines with drawing scanning -Type: 1.4 -Power: 24 V/100 W -f: 110 mm -Price: per piece -Number: 2x available -Dimensions: 230/93/H125 mm -Weight: 0.8 kg

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price