130,803 used machines on RESALE, but how to find them? Machine Search
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min grinding range: 150 x 540 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 1x0,5x1 m Art.-No.16680 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 2451 mm Working width: 1670 mm Working height: 800-1000 mm Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinst ...
0: 680 x 450 x 430 mm operating pressure: 3 - 6 bar Air consumption: 250 l/min. weight of the machine ca.: 28 Kg : 0,76 x 0,5 x ,75 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Loading caterpillar Hanomag D 600 functional, top engine
: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15-150 m/min capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 60 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW dimensions: 1300 x 2050 x 1400 mm weight: 910 kg Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high ...
: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
degree: 650 working heigth: 250 mm length: 250 mm width: 250 mm depth: 450 mm total power requirement: 8 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...
Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, 261 targets - used - : Price sorter incl. control, continuous roller conveyors and pick by light (without conveyor technology) from location: 99.500.-€ (net), incl. dismantling, packed and loaded! Price of the existing Transnorm conveyor technology (approx. 170m) incl. scanner and labeller: 15.000.-€ (net) incl. dismantling, packed and loaded! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of Make: 2013 • UNIQUE PUSH TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6000 trays/h Total length of the system: 53 m Total width of the system: 14 m Number of infiltration stations: 1 Width of infiltration station: 2 m Number of trays: 200 pieces Usable size on the trays ...
Yaskawa Motoman HP3XF – 6-Axis Industrial Robot Compact and high-speed 6-axis industrial robot designed for precise material handling, machine tending, assembly, and dispensing applications. The Yaskawa Motoman HP3XF offers excellent accuracy, flexibility, and reliability for automated production environments where space efficiency and precision are critical. General Information - Manufacturer: Yaskawa Motoman - Model: HP3XF - Robot Type: 6-axis industrial robot Technical Specifications - Number of Axes: 6 - Payload Capacity: 3 kg - Horizontal Reach: 1,375 mm - Position Repeatability: ±0.03 mm - Robot Weight (arm): approx. 32 kg Mounting Options - Floor mounting - Wall mounting - Ceiling mounting - This flexible mounting capability allows easy integration into different automation layouts. Protection Class - IP54 (robot body) - IP67 at wrist Controller ...
A Eurotrac HE18-C is sold Price incl. VAT VAT reclaimable New --> Warranty Eurotrac HE18-C Engine: Kubota Heating Radio Swivel arm 2 Travel speeds Hydr. Adjustable chassis Hydr. Quick Hydr. Adjustable embankment function Shovel Package Specifications: Engine Model: Kubota D1105 Stage-V (14.2Kw) Net weight: 1850 kg Machine weight: 1760 kg Main pump flow: 2x 17.6 + 6.6 l/min Tank capacity: 22 ltr Adjustable track width: 1060~1360 mm Travel speed: 2 / 4 km/h Quick-change model: CW0 Bucket capacity: 0.04 m³ Bucket width: 400 mm Bucket Max. Excavation Force: 11.3 KN Engine Model: D1105 Engine Displacement: 1,123 L (cc) Motor Output Power: 14.2 KW (20 HP) Power speed: 10-12 r/min Performance Running speed (low/high): 2/3.6 Km/h
maximum number of results exceeded
please refine your search
