h und b used for sale

Heidenhain RON 255 C-18000 ID.-No. 358 697-70 Incl. test report from Heidenhain Replacement part not required

Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg

Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

Shaftless Unwind Monomatic Typ MD 107 (150 mm core diameter) FIFE side edge control max. roller diameter 1,070 mm Web tension control device Multiple breaking device Trimming station Cutting accuracy +/-0.2 mm Automatic angle adjustment Automatic sheet length adjustment without gear change Working width up to 1250 mm min. Working width 600 mm, cutting length from 550 to 1500 mm Materials from 60 g/sqm to 150 g/sqm (unwinder max. 120 g/m2) Ionisation device Waste ejection station Shingled delivery Belt delivery extended to the end of the stack Counting device Pile delivery with jogger max. mechanical output 300 m/min Cerutti embossing station - suitable for surface embossing (steel - paper 1 : 1.85) Embossing calender output max. 250 m/min

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg

Year of construction 2000 WashStar Equipment Cabinet HD-No. V8.999.162 B Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Three-phase motor, electric motor -Power connection: 3x 220 volts -Power: 3.6/4.4 kW -Speed: 1440/2890 rpm -Shaft: Ø 30 mm -Design: B3 -Protection class: IP 33 -Quantity: 1 available -Dimensions: 570/260/H230 mm -Weight: 35 kg

pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Terminal / Monitor for CNC Printing Machines F&K , Mint condition because never used

Clamping angle for workpiece clamping -Dimensions: 151/391/H191 mm -Thickness: 18 mm -Surface: milled -Weight: 16 kg

Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm -Weight: 27 kg

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

Control: iTNC 530 Max.travel range: X 850 mm Y 700 mm Z 500 mm A +/- 115? C nx 360? Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 38+44 positon Coolant tank: 900l machine has spindle cooling, Erowa clamping system is available, measu

Max.turning length: 600 mm Max swing diameter over bed: 250 mm Quick Change Toolposts:1 Coolant tank:50l Made in Germany Control: manual

Guide cartridges for Hagen & Goebel tapping machines Machine type HG6 Original price at the manufacturer 322.-€ net. I offer them the guide cartridges at half the original price. There are several inclines, please inquire about the required incline.

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

Year of construction unknown Imprint suitable for Heidelberg MO Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Key data: 75 t, 80 mm, 250 1/min

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

x-travel: 750 mm y-travel: 750 mm z-travel: 725 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische ...

impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 625 x 550 mm max. speed plates: 30 /h resolution of impression: max. 2540 dpi Violet Laser incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 175.887 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker

Original Heidelberg Cylinder 54 x 72 cm Built in 1959 Art.Nr. PS5980 FB 10500 € FCA

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 123 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 33 -Number: 1x motor available -Dimensions: 640/290/H300 mm -Weight: 76 kg

HITACHI RCUE50CLG Brand:HITACHI Type:RCUE50CLG Stock number:M23-4664 Cooling capacity:145 kW Refrigerant:R407C Refrigerant Content:1 kg Voltage:400 Volts Power consumption:42,4 kW Dimensions:1088 x 935 x 1343 mm Weight:680 kg Year:2009 New/unused Number in stock:1 piece(s) Price:On request I Description: New unused Hitachi split chiller with 1 screw compressor. Mentioned capacity at a water temperature of +12/7°C and a condensation temperature of +45°C. This split chiller is without a condenser. We can offer a suitable condenser on request. Visit our website: used-refrigeration

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 45 °

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Key data: 600 mm, 20 °

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Diesel tank system, diesel tank, gas station, fuel tank system -for: diesel, heating oil -Mobile -with: electric motor pump -Delivery rate: approx. 30 l/min -Liter display clock -Content: 800 liters -Dimensions: 1500/800/H1480 mm -Empty weight: 310 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg