129,200 used machines on RESALE, but how to find them? Machine Search
The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).
Lenght of tenon: 0 mm Thickness of tenon: 0 mm Depth of tenon: 0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO
pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders
welding current: 20 - 60 A cutting capacity: 1 - 20 mm open-circuit voltage: 104 V Required air-pressure: min. 4 bar connected load: 7,9 kW connected load frequency: 400 V weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology Delivered without CEE plug. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 65 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 1x engine available -Price: per piece -Dimensions 360/180/H175 mm -Weight: 12.2 kg
POWDER COATING HAND GUN Cost effective and long life cascade Made in Turkey
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg
Description: Well maintained forklift with inspection, 3rd and 4th valve present, including 1 (steel) gas bottles. Year of construction: 2002 Lifting capacity: 8,000 kg (at 900 mm distance) Inspection until: April 2024 Operating hours: 11,200 hours Mast: plywood (3-piece) with free-lift (2700 mm) Engine: 6 cylinder Perkins (gas) Tires: super elastic (for double) Lifting height: 6,000 mm. Height (retracted): 3,900 mm Fork length: 2,400 mm Dimensions: L x W x H: 3,780 x 2,260 x 3,900 mm (without forks) Request for more photos!
Nominal temperature 300 °C Interior volume 52 l Interior dimensions (W x D x H) 403 x 339 x 380 mm 2 chrome-plated slide-in grates Digital temperature control Temperature selector limiter Speed control circulating air fan Fresh air filter, volume flow 10 m3/h Without air flap adjustment Temperature protection class 2 Last check 11/2021 Drive 220V/50Hz/1,5kW Without under-table
Clamping angle for workpiece clamping, eccentric press -The clamping angle comes from: an eccentric press -Manufacturer Heilbonn Type: REPV60 -Clamping surface: 600 x 720 mm -Plate thickness: 75 mm -Groove: mm -Surface: milled -Dimensions: 735/900/H545 mm -Weight: 532 kg
used
Recon Part Number: 301111 Completely standard size Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: A301123 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Electronics cables, extension cables, electronics cables -Manufacturer: Helukabel -Type: TRONIC-CY 4X0.25 QMM -Length: 1030 m -Number: 4x wires á 0.25 mm² -Price: complete -Dimensions: 495/495/H320 mm -Weight: 40 kg
Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw
Central lubrication, oil circulation system, progressive pump -Contents: 7 l -Drive: 0.45 kW -Sample container -Number: 1x pumps available -Price: per piece -Dimensions: 500/230/H450 mm -Weight: 19 kg
Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg
Key data: 299 mm, 620 mm, 150 mm
Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...
PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph
Mayfran coolant system with Knoll high-pressure pump for internal cooling Scraper Belt Chip Conveyor Mayfran Bar loading magazine 3 m Equipment: 1 x Sawing unit 6 x Feed unit 1 x Turning unit 1 x Grooving Unit 1 x Thread Rolling Unit 16 x Collet SW36 1 x Saw and Turning Bushing SW36 1 x conversion kit of the turning unit up to SW41 1 x Control Pin Turning Station Unit 8 2 x Hydraulic Drill Head 3 x Angle Milling Head
Key data: 33 KW, 45 kVA, 230 V
Nominal power (PRP) kW 37.7 Nominal power (ESP) kW 41.8 Manufacturer: YANMAR Model No.: 4TNV98TZGGEHR Engine Type: Diesel, Four-Stroke Type of Injection: Direct Type of intake turbocharger Cylinders, number and Arrangement 4-L Diameter x travel mm 98 x 110 Total displacement L 3,319 Cooling System Coolant Engine Oil Specifications API CF,CF-4,CI-4 Compression Ratio 18.1
Nominal power (PRP) kW 37.7 Nominal power (ESP) kW 41.8 Manufacturer: YANMAR Model No.: 4TNV98TZGGEHR Engine Type: Diesel, Four-Stroke Type of Injection: Direct Type of intake turbocharger Cylinders, number and Arrangement 4-L Diameter x travel mm 98 x 110 Total displacement L 3,319 Cooling System Coolant Engine Oil Specifications API CF,CF-4,CI-4 Compression Ratio 18.1
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 465-2325 rpm -Motor: adjustable -Design: B5 angle -Drive shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 545/210/H180 mm -Weight: 22 kg
Shelves, shelves, shelves -Material: Galvanized -Dimensions: 765/995/H37 mm -Number: 30x shelf plates available -Price: complete -Transport dimensions: 1200/800/H1330 mm -Transport weight: 224 kg
SPARE PART E0033 Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW SPAREPART E0033 Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 Include disk HDM: 42.101.051 1.5 KW
x-travel: 1250 mm y-travel: 910 mm z-travel: 875 mm Control: Siemens type: 840 D size of pallet: 800x800 mm numbers of pallets: 2 turning speeds: 20-6000 U/min transmission ratio: 2 Feed: 1-32000 mm/min : 360x1 ° turning speeds: 16,5 U/min Table load: 1150 kg spindle taper ISO: 50 Tool changer: 165 Pos. total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor, three-phase motor -Power: 0.95 kW -Speed: 950 rpm -Shaft: Ø 24 mm -Design -Protection class: IP 54 -Dimensions: 320/180/H250 mm -Weight: 16.5 kg
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Design: B3 / B14 -Protection class: IP 44 -Dimensions: 270/160/H195 mm -Weight: 10.9 kg
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm -Connection output: 400 x 400 mm -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm -Weight: 222 kg
gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg
Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 130 mm -Length: 475 mm -Height: 100 mm -Number: 1x saver available -Price: per piece -Weight: 5.2 kg/piece
Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece
Plastic protectors, impact protection, bollards, polyamide -Solid material -Width: 123 mm -Length: 330 mm -Height: 82/50 mm -Drawing in the pictures -Number: 19 protectors available - Price: per piece -Weight: 2.4 kg/piece
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: T (Thyssen) Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. á 2,700 mm Number of levels plus floor level: 02 pcs. Volume Specifications: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 2,200 mm high 1,100 mm deep 20x Pallet rack trusses, used Ma ...
Key data: 420 mm, 250 mm, 350 mm
with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!
Hobart HSM40 Planetary mixer Planetary mixer, variable speed, 2x 40l stainless bowls, three attachments beater, hook, whisk, mesh safety guard, 3Ph
centre height: 175 mm centre distance: 300 mm number of spindle speeds: 2.000 - 8.000 control: SIEMENS 840D machine weight ab.: 7.500 kg surface area: 1.000 x 270 mm number of T-slots: 3 groove width: 12 H7 mm flute distance: 50 mm spindle diameter in front bearing: 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Herma Labeler 452 MS with Graseby Allen Pressure Unit Perfect for e-cigarettes / lipstick etc
Key data: 800 mm, 600 mm, 600 mm
Machine Details Stock-No. 1105-03955 Type of machine Machining Center - Universal Make HERMLE Type C 800 U Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Technical details x-travel 800 mm y-travel 600 mm Z-Travel 500 mm control TNC 426 HEIDENHAIN turning speeds 15000 1/min taper ISO ISO 40 tool change unit 98 spindle 15 kW Additional information 5-axis machine with round-swivelling table, NC-swivelling table dia. 290mm,A-axis from -110° - +110°, B-axis 360°, Laser tool measuring system Ethernet interface, EXTRA MAGASIN 96 TOOLS flush gun, lots of accessories,
Used drying system for hygroscopic plastics from Moretto. New 2011. Composition: - dehumidifier with two dehumidification columns XD610S, - stainless steel OTX 600VP insulated hopper with suction valve + heater 9 kW + fastening frame, - stainless steel OTX 1800VP insulated hopper with suction valve + 27 kW heater + fixing frame 27 kW heater + fastening frame, - server to control the process of air distribution to FLOWMATIK hoppers, - modular piping. Other details: - Drying time: 3h - Initial moisture content: 0.2% - Final moisture content: 0.02% - Air flow rate: 1200 m3/h - Dew point value down to - 75°C Operating hours: 29477 h
number of heads: 2 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 20 mm serial no.: 26332 voltage: 280/220 V Dimensions (L/W/H): 80x120x170 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Handtmann VF 608 Plus, vacuum filling machine for filling, portioning, linking, with servo drive, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., MC control (colour), 10243 operating hours, refurbished condition.
Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg
impressions: 28 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 956.596 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk Stack height: Anleger 490 mm Stack height: Ausleger 460 mm power required: 3,0 KW frequency: 60 Hz voltage: 220-240 V 3 inking forme roller per printing unit Blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: 26214 dimensions of press (L x W x H): 64 x 102 x 105 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 961.450 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
