h und b used for sale

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece

Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm -Weight: 22 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaw: 200 mm -Hole spacing: 140 mm/Ø 10 mm -Dimensions: 202/18/H75 mm -Weight: 2.1 kg

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece -Number: 2 Stück -Dimensions: 250/110/H65 mm -Weight: 2.7 kg/piece

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

liter capacity: . l feed pressure: . bar coolant capacity: . l total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick-release clamping device, quick-release clamp, drilling device, drill bushings -Drilling jig: as a quick-clamping device for flat material -Transport box: incl. -Drill sleeves: Ø 12 mm, spacing 100 mm -Dimensions: 1900/150/H60 mm -Transport box: 2040/225/H280 mm -Weight: 70 kg

x-travel: 8000 mm y-travel: 1500 mm z-travel: 2500 mm Control: Heidenhain Itnc 530 total power requirement: 96 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagn ...

offer 15107 Specifications: - Total load capacity driven + rotating unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Axle distance of the support rollers adjustable - Steel support rollers - Roll diameter 650 mm - Roll width 200 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 5100 x H 1000 x D 1500 mm - Platzb. with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight applied Unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Dicer Holac Dimensions: 210x130x200cm Electrical power: 9kW

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 325 mm -Piston diameter: 32 mm -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece -Number: 2 piece -Dimensions: 530/110/H65 mm -Weight: 3,9 kg/piece

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Furniture dollies, furniture dollies with plastic wheels, furniture transport trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, panel trolleys, pipe trolleys -Length: 1040 mm -Width: 700 mm -Height: 1025 mm -Quantity: 1 piece -Weight: 52 kg

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.

STAMFORD Synchronous Generator HVSI 824 F2 2788 KVA 10,500 V 153.3 A 50 Hz, 1500 1/min. Accessories: - 2 sets winding PT100 - AVR MA327, PFC-3 COMPLETELY RECONDITIONED, restored, windings impregnated

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 1.03 kW -Voltage: 176 V -Speed: 2000 rpm -Shaft: Ø 19 x 40 mm -Number: 3x motors available -Price: per piece -Dimensions: 460/120/H150 mm -Weight: 16.6 kg/piece

Power cable, solar cable -Solarflex: PV1-F 1 x 6 qmm -1x4 mm³: 0.6/1 kV -Dimensions roll: Ø 400/310 mm -Weight: 8 kg

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet rack stand: Shelving system: Hovuma The scope of delivery includes: 01x pallet rack stand, used Material color: cream white Profile credit: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 6,640 mm high 870 mm deep

Clamping plate, welding table, welding table, straightening plate -Surface: milled -Cast table -Length: 1995 mm -Width: 1995 mm -Height: 320 mm -Plate thickness: 42 mm -Transport dimensions: 1995/1995/H320 mm -Weight: 1647 kg

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 140/80/H88 mm -Weight: 1.65 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 450 mm -Piston rod: M20 x 1.5 -Air inlet and outlet: adjustable -Dimensions: 680/115/H115 mm -Weight: 8.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Prism size: 24/70 mm -Dimensions: 80/54/H100 mm -Weight: 2.6 kg

Electric motor, three-phase motor -Manufacturer: Himmelwerk, electric motor type 2 LF12 / 5.5 -Power: 1.1 kW -Speed: 2780 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Dimensions: 250/180 / H270 mm -Weight: 10 kg

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

Surface Grinding HARIG Super 612 - No 2 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

Electric motor, three-phase motor -Manufacturer: Himmel, electric motor from saw-drill / milling machine Rapid DGL / BFA -Type: 2 HR 80 -Power: 1.3 kW -Speed: 2820 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 270/200 / H250 mm -Weight: 11 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Lashing eyes: attachment points, 40 pieces -Material: stainless steel, 10 thick -Dimensions .: 100 x 48 x H110 mm -Eyelets: 60 x 30 mm -Bores: Ø 18 mm -Price: complete -Total weight: 31 kg

Surface Grinding HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

format 38 x 52 cm Year of construction 1958 Single sheet feeder Inking unit complete for printing and die-cutting Price on request. We deliver and install worldwide!

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 690 x 700 mm -T grooves: 5 pieces 28 mm -Number: 1x table available -Dimensions: 690/700/H693 mm -Weight: 360kg

Depositor / In-Feed Conveyor for Horizon SPF 20A (new, never used with equipment)

Wartsila L32 cylinder heads Brand new condition With BV class certificate 8 Pcs available In our stock in Istanbul Turkey

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, hydraulic valve -Manufacturer: Herion, hydraulic directional control valve p max 315 bar -Type: S6VH10G15900160V -Dimensions: 155/45/H70 mm -Weight: 1.9 kg

MAK 32C cylinder heads In brand new condition 18 Pcs available With BV class certificate In our stock in Istanbul Turkey

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, Gas pressure switch -Type: C6097A2200 -Control range: 2.5 - 50 mbar -Pmax: 300 mbar -Dimensions: 85/65/60 mm -Weight 0.2 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece