h und b used for sale

Axial fan, Gigabox, fan, blower, high-pressure duct fan -Power: 0.75 kW -Speed: 1420 rpm -Fan wheel diameter: 445 mm Protection class: IP54 -with connection cable and on/off switch -Dimensions: 520/560/H470 mm -Weight: 53 kg

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator -Manufacturer: Opel, water cooler -Type: unfortunately not known -Hole spacing: lengthways 280 mm/crossways 445 mm -Dimensions: 460/165/H450 mm -Weight: 5.1 kg

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Wire stitching machine Hohner Economy 25/40; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with folded clamp, 40mm with unfolded clamp; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.

Computer monitor, operating unit, operating unit, keyboard, screen, control, industrial monitor -Manufacturer: Cybernet -Accessories: swivel arm, multiple adjustable -Dimensions: 600/200/H365 mm -Weight: 10 kg

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Telescopic cylinder: 2-stage, single-acting -Piston rod: Ø 61/Ø 45 mm -Stroke total: 383 mm -Total length: retracted 340 mm -Cylinder holder: Ø 25 mm -Dimensions: 340/155/H100 mm -Weight: 11 kg

workbench, work table, assembly bench -with: bench vise -Width: 1500 mm -Depth: 730 mm -Height without vise: 920 mm -Clamping jaws: 115 x 20 mm -Wingspan: 160 mm -Worktop thickness: 40 mm -Drawer: 1 -Weight: 85 kg

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box made of: VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Weight: 10.5 kg

Output conveyor for Horizon SPF 20A / FC-20

Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 495 mm -Width: 398 mm -Height: 85 mm -Plate thickness: 20 mm -with support ribs -Weight: 37 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellow coupling, mechanical shrink disk -Manufacturer: Stuwe, mechanical shrink disks -Type: HSD 62-22x62 -Shaft: Ø 62 mm -Price: per piece -Number: 33 piece -Dimension: Ø 110 x 35 mm -Weight: 1.3 kg/piece

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA61240-0300 -Stroke: 300 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 3.5 kg

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, gas pressure switch unused, Ovp -Type: C6097A2310D -Control range: 30-150 mbar -P max.: 500 mbar -Number: 19x switches available -Price: per piece -Dimension box: 110/95/H95 mm -Weight 0.3 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2410D -Control range: 100-500 mbar -P max.: 600 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 23 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -Height: 660 to 1000 mm adjustable on both sides -Steel frame: solid -Dimensions: 1120/515/H660 mm -Weight: 64 kg

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2110D -Control range: 1.0-10 mbar -P max.: 200 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 25 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Key data: 4500 , 1300 , 485

CNC machining center VEGA 5X 5 axis center

Commercial dishwashers Hobart FXS-70NB defective -defective commercial dishwashers from Hobart -Model FXS-70NB -Years of construction from 2008 to 2012 -more than 30 pieces available in stock

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 390 mm -Length: 1185 mm -Height: 42 mm -Groove width: 18 mm -Holes: see photos -Weight: 145 kg

S.No.: 033001 Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

Net price: 7.500,- € gross price: €8,925 - - - - - Yanmar emergency generator set 9 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 8.3 / 8.9 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 150 x 75 cm - Weight: 470 kg - Tank volume: 22 liters - Sound level: approx. 59 dB (7m) - Fuel consumption: 2.2 l/h (75%) - Case color may ...

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

price outside EU: 8.350,- € gross price: €9,936.50 - - - - - Yanmar emergency generator set 13 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.2 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m) - Consumption: 1.8 l/h (50%) / 2.3 l/h ...

price outside EU: 8.850,- € gross price: €10,531.50 - - - - - Yanmar Emergency Power Unit 13 kVA - Stage V + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.7 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Emission standard: Stage V - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m)  ...

working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW  ...

price outside EU: 9.600,- € gross price: €11,424 - - - - - Yanmar emergency generator set 18 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 17.2 / 18.4 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 770 kg - Tank volume: 100 liters - Sound level: approx. 61 dB (7m) - Fuel consumption: 2.4 l/h (50%) / 3.1 ...

Net price: 10.000,- € gross price: €11,424 - - - - - Yanmar emergency generator set 18 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 800 kg - Tank volume: 100 liters - Sound level: approx. 59 dB (7m) - Consumption: 2.7 l/h (50%) / 3.5 l/h (75%) - C ...

Net price: 11.500,- € gross price: €13,685 - - - - - Yanmar emergency generator set 35 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 34 / 37 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 910 kg - Tank volume: 100 liters - Sound level: approx. 64 dB (7m) - Consumption: 4.0 l/h (50%) / 5.3 l/h (75%) - C ...

Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350

Workbench, work table, assembly bench -Width: 2000mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Storage: 1 -Number of workbenches: 3 available -Price per piece -Weight: 116kg/pcs

stacking bundler Heidelberg HSB 34; good condition; cleaned and tested; .max. Format 34x23cm, min.14x8cm; .max. Stack length unpressed 75cm; Bandwidth 12mm PP tape; Compressed air required. Stacker bundler Heidelberg HSB 34; good condition; cleaned and checked; max.size 34x23cm, min.14x8cm; max.pile lenght unpressed 75cm; band width 12mm PP-band; need compressed air.

Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece