132,104 used machines on RESALE, but how to find them? Machine Search
Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal volume flow: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motorized; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating dust in the cyclone separator and cartridge filter Effective cartridge filter with a large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Included
Max. sheet size: 364 x 865 mm Min . sheet size: 105 x 180 mm Sheet weight range: Normal paper : 80 to 350 gsm (with Folding) 80 to 400 gsm (without Folding) Coated paper: 105 to 350 gsm (with Folding) 105 to 400 gsm (without Folding) Laminated paper : 0.2 to 0.4 mm (with Folding) 0.2 to 0.5 mm (without Folding) TouchScren Panel PRF 36 Perforation unit
This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2019. It features a spindle with a maximum speed of 12,000 rpm and a power of 22.4 kW. The machine offers a travel range of X=1270 mm, Y=508 mm, Z=635 mm, and a rapid feedrate of 35.6 m/min on all axes. The table can support up to 794 kg. Consider the opportunity to buy this HAAS VF-4SS vertical machining center. Contact us for more information.
Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg
Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg
Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg
This 3-axis HAAS VF-1 was manufactured in 2020. It features a working area with X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a maximum spindle speed of 8,100 RPM and comes equipped with a Renishaw OTS tool setter and a tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1HE-D vertical machining centre we have for sale. Contact us for further details.
This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details.
Tumbler Henneken -Capacity: 2000L -Dimensions: 2400 x 1500 x 2100 mm -Busch vacuum pump -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details.
Decoiler of construction steel coils up to 5tons. Machines worked just less than one year.
CONTROLS electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE length: 50 mm diameter: 700 mm ELECTRICAL SPECIFICATIONS total power consumption: 100 kW The machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.
HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg
Edge banding machine Type: AURIGA 1308 XL Black Edition Manufacturer: Holz-Her Year: 2018 Avaílable: 7/2026 Edge thickness (rolled material): 0.4 – 3 mm Edge thickness (strip material): 0.4 – 8 mm Edge cross-section: max. 6 × 42 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm (with corner copying 12 – 60 mm) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) / min. 180 mm Feed speed: 10 m/min Equipment and control: Edge Control 19 control system with 18.5” touch color display Rotating and tilting control panel at eye level Motorized adjustable pressure bridge Gluing technology – iTronic: Adaptive pressure and glue dosage control Automatic fine-tuning according to material type Optimization of edge thickness and glue type for best results Automation package includes: Glue quantity control Adaptive trimming knif ...
Width 45 cm Year of construction 2008 Automatic Folding Carton Gluer Machine Nonstop friction feeder Pre-crushing device Disc underglue unit KAS Nozzle Gluing Unit with 3 Nozzles Longitudinal seam device Folding floor equipment Equipment for folding and conical boxes Multi-chamber folding cartons Small format equipment for longitudinal seam Wireless, radio-controlled control unit Pressing tape
Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -
CONTROLS conventional BASIC DESIGN basic design: cross bed WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 1120 mm Y-axis travel: 350 mm Z-axis travel: 400 mm distance spindle nose - table surface (max.): 420 mm TABLE table surface (left-right): 1600 mm table surface (front-back): 400 mm workpiece load (max): 1500 kg SPINDLE / HEAD spindle type: tilting head - mode of operation: manual - mode of operation: manual spindle revolutions (max): 28 /min number of gears: 1400 tool fixture: ISO SK 40 AXIS DRIVES feed velocity (min): 16 mm/min feed velocity (max): 800 mm/min ELECTRICAL SPECIFICATIONS total power consumption: 14.5 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2350 mm total height: 2150 mm total w ...
Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...
A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.
Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible.
A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.
A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.
A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.
Key data: 1000 kN
BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m
- banding machine - Standard Version - with the existing accessories
Key data: 3200 kN, 75 mm
BILLION HERCULE H2000 Series - 320 T Clamping Force : 320 T - 3200 kN Injection Unit : H 2000 Screw Diameter: 75 mm Year: 1998 Maximum Theoretical Volume : 1259 cm³ Maximum Material Pressure : 1587 bar Maximum Injection Flow Rate : 970 cm³/s Platen Dimensions : 1045 × 1045 mm Distance Between tie bar : 735 × 735 mm Dimensions : 7.6 x 2.1 x 2.6 m Weight : 15,500 kg
This 3-axis Hurco VMX 42 vertical machining centre was manufactured in 2004. It features a table clamping surface of 1270 x 610 mm and travels of 1060 mm in the X-axis and 610 mm in both Y and Z axes. The machine has a maximum table load of 1100 kg and a spindle speed range of 10 - 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 machine we have for sale. Contact us for further details.
It is a used Hobart planetary machine type A 200 on mobile stainless steel frame for sale. The machine is checked and runs smoothly. With 20 litre bowl, 4 x tools (1 x whisk, 1 x dough hook, 1 x kneading spiral, 1 x flat stirrer). The machine has a safety ring with automatic shut-off above the boiler. The planetary machine has three speeds. A video can be sent on request. Price: 1150,--€ excl. VAT ex stock Straubenhardt (Germany)
This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 Ã 610 Ã 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details.
This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 Ã 508 Ã 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details.
This 3-axis HERMLE C 600 V was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a tool magazine that holds 30 slots and an internal coolant supply of 10 bar. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 V vertical machining centre we have for sale. Contact us for further details.
This 5-axis Hurco VMX 30i was manufactured in 2017. It features an X/Y/Z travel of 762 Ã 508 Ã 610 mm and a spindle power of 15 kW, providing efficient machining capabilities. The machine includes a tool magazine with 24 positions and a robust table size of 1020 Ã 510 mm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30i vertical machining centre we have for sale. Contact us for further details.
A CNC coordinate measuring machine Zeiss calibrated at the end of 2025 is available. Measuring dimensions X/Y/Z: 1200mm/1800mm/1000mm, max. workpiece weight: 2000kg, length measurement deviation: 2µm/L300, resolution: 0.2µm, measuring rate: 200/s, max. stylus length: 800mm, max. probe mass: 600g, measuring head: VAST Gold Scanning. Machine dimensions X/Y/Z: approx. 3000mm/2050mm/3550mm, weight: approx. 6000kg. Without grid plate, probe rack, software license and computer. Documentation available. An on-site inspection is possible.
This 4-axis HANNSA YL 850 B was manufactured in 2016. It features an X-axis travel of 850 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a FANUC 0I-MF CNC, a spindle speed of 10,000 rpm, and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the HANNSA YL 850 B vertical machining centre we have for sale. Contact us for further details.
This 4-axis NORDEST HYDRA MP 110 boring machine was manufactured in 2005. Ideal for precision boring tasks, it offers robust construction and reliable performance. If you are looking to get high-quality boring capabilities, consider the NORDEST HYDRA MP 110 machine we have for sale. Contact us for more information.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 193.231 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 132.756 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 4600 /h max. paper size: 54 x 72 cm serial no.: 13865 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Hermle Model: C 800 U Year of Manufacture: 1997 Configuration: 5-axis with rotary table, C-axis and A-axis Control System: Heidenhain 426 Find more here - / Contact us at -
This 3-axis HAAS DT-1 was manufactured in 2010. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 394 mm. The machine includes a table size of 660 x 381 mm and a spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS DT-1 vertical machining centre we have for sale. Contact us for further details.
This 4-axis HAAS VF-2SS was manufactured in 2011. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a table size of 914 x 356 mm and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS vertical machining centre we have for sale. Contact us for further details.
Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is FUNCTIONAL TESTED in VERY GOOD CONDITION from stock Lieboch
Labeler Manufacturer: HERMA Type H 400 8 L Serial No. 20923342 Left-hand device with detaching edge with spring-loaded roller angled 75° (see drawing) Running direction from left to right
Excellent condition - Fully operational - Loading / Transport possible! Twin spindle Swing over bed: 530 mm Turning length: 330 mm X-Axis travel: 210 mm Z-Axis travel: 310 mm Rapid traverse: 30 m/min Spindle speed: 8000 Rpm Spindle configuration: A2-4, 5C Spindle bore: 27 mm Turret type: VDI 25 Live tool speed: max. 6000 Rpm Number turret positions: 16 Control: GE Fanuc Series 18i-TB Incl various tool holders a.o. 6x driven toolholders Note! No tooling Bar Feeder: BARLOAD Type: Hydrafeed BA 65 S/N: 16080043 Year 2009 Bar length: 1200 mm Bar diameter: 5-65 mm Bar capacity: 10 pcs (65 mm) Dimensions: 1910x1000x1250 mm Weight: 320 kg
Excellent condition - Fully operational - Loading / Transport possible! Year of construction: 05.06.2018, max. spindle speed: 10,000 rpm, own weight: 3,070 kg, total weight: 3,500 kg, Operating hours read off: machine: 8,678:16 h, spindle: 3,567:18 h External dimensions: 2,500 x 3,000 x 2,500 mm, with MAX 5 single control, with WinMax software, 1 x 19" LCD color screen, with high-pressure cooling system for coolant supply through the spindle, Elmusion cooling lubricant, coolant pressure 10 bar, 20-station tool changer, Attention : Tools and tool holders are not included in the lot Integrated hydraulic tool clamping system, with workpiece length detection with a probe and tool length calibration with a laser, RENISHAW OMP60 workpiece probe system, RENISHAW Laser NC4 tool probe system, with chip worm, including digital operating manual on a USB stick Condition Note: Machine has never be ...
Excellent condition - Fully operational - Loading / Transport possible! 5 AXIS CNC Toll & Cutter Grinder Walter Helitronic Power HMC-400 Specifications: Capacity of Workpiece Dia.: 1mm – 99mm Max. Peripheral Grinding: 254mm Max. End Face Grinding: 185mm Max. X Axis Travel: 350mm Max. Y Axis Travel: 200mm Max. Z Axis Travel: 470mm A Axis: Infinite C Axis Rotary: +/- 200° ( 0.001° ) Grinding Spindle Motor: 16 hp Grinding Wheel Type: Diamond or CBN Grinding Wheel Dia. Max.: 150 mm Grinding Wheel Speed: 500 to 10,500 RPM Programs include: Drill, End Mill and Form Tool Double side grinding spindle Walter Helitronic Power HMC-400 Equipped With: 10,500 RPM Precision Spindle Windows based Walter cnc Control CBN Diamond Wheel installed Probing system Coolant and Filtration System (small tanque) Full Enclosure WorkLight
maximum number of results exceeded
please refine your search
