h s m used for sale

Gear motor, electric motor, stop motor, drive motor, electric driven motor -comes from a Homag double-sided edge banding machine -Power: 0.18/3 kW -Speed: 64/77/320/384 rpm -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24 volt coupling -Dimensions: 620/350/H200 mm -Weight: 41 kg

Geared motor, electric motor, stop motor, drive motor, electric geared motor, three-phase motor -comes from a Homag double-sided edgebanding machine -Power: 0.18/3 kW -Speed: 7/320 rpm -Design: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24-volt coupling -Number: 2x geared motors available -Price: per piece -Dimensions: 650/320/H230 mm -Weight: 35 kg/piece

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: you can rebate, groove and profile -with keying: from 2 sides each -Milling unit: swiveling -1x engines Perske -Power kW -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/520/H600 mm -Weight: 80 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg

Gear motor, electric motor, electric gear motor, three-phase synchronous motor -Manufacturer: Heynau, gear motor type GX3-56 / 4-BH -Speed: 33 rpm i 40.09 -Motor: ABM Greifenberger type EFB 1/3 DBF 56 a-4 -Power: 0.09 kW 1350 rpm -Construction: B3 -Hollow shaft: Ø 14 x 30 mm -Brake: 1.4 Nm -Dimensions: 324/116 / H180 mm -Weight: 6.5 kg

Feeler gauge, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert, measuring probe, digimatic indicator -Manufacturer: Heidenhain, measuring probe TS 220 ID.No. 293 488-07 -Intake: SK50 -Case: with accessories, see photo -Dimensions of the case: 400/195/H140 mm -Weight: 6.4kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Geared motor, electric motor, electric geared motor, crane motor, crane drive -Manufacturer: HELIN, geared motor from Lotze HDZK swivel bending machine -Type: DKH 12.5a-4 -Speed: approx. 340 rpm -Motor: 2.2 kW / 1400 rpm -Voltage: 220/380 V -Shaft: Ø 33 x 40 mm -Dimensions: 750/410/H295 mm -Weight: 135 kg

Roller glue application machine, laminating machine, laminating system, laminating system, layering machine -Manufacturer: Hymmen, glue application machine, layer machine type 36 -Working width: 1300 mm -Roll diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder -sold as a source of spare parts -Adjustment device: for grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 580/400/H500 mm -Weight: 120 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Maintenance unit: with stable bracket -Outputs: 2x individually lockable -Pressure: Max. 10 bar / 150 PSI -Dimension: 390/325/H520 mm -Weight: 16 kg

Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder -Clamping angle: for tool grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 150/150/H215 mm -Weight: 8.2 kg

Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, measuring probe for roughness measuring device -Measuring probe: Type P2FE 30 / P2F E 100 -Individual components: see photos -Box dimensions: 235/105/H30 mm -Weight: 0.4 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, bus module, bus module, Ethernet -Manufacturer: HMS, Anybus module -Type: ABX-EMBS-PDPS -Number: 3x module available -Price per piece -Dimension: 140/110/H50 mm -Weight: 0.5 kg/pc.

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Electronic module: from Battenfeld injection molding machine -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 115/80/H50 mm -Weight: 0.2 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid mobile base -Clamping table: 1500 x 500 x 150 mm -Table height: 1010 mm -Sheet thickness: 30 mm -Plate: with supporting ribs -Overall dimensions: 1530/710/H1010 mm -Weight: 320 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Baldor, circuit board electronic module circuit board from press brake HACO PPES 30135 -Type: TEM 060-06-01-1 -Individual components: see photos -Dimensions: 165/100/H250 mm -Weight: 0.9 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Magazine trolley: transport trolley with visible storage boxes -Transport trolley: 950 x 750 mm -Open storage boxes: 9 pieces 715 x 465 x H300 mm -Levy/Price: complete -Total dimensions: 950/750/H1610 mm -Weight: 67 kg

Electric motor, three-phase motor -Manufacturer: Hanning, electric motor type W22 WIMES Premium 160L-04 -Power: 18.5 kW -Speed: 1475 rpm -Voltage: 380/660 V -Shaft: Ø 50 x 235 mm -Shaft axis height: 260 mm -Design: B3 -Protection class: P 33 -Dimensions: 850/465/H465 mm -Weight: 247 kg

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: Transport trolley with open storage boxes, solid design -Transport trolley: 1425 x 640 mm -Storage compartments: 64 pieces, 32 pieces on both sides, some with open storage boxes -Base: 4 swivel castors -Total dimensions: 1425/640/H1460 mm -Weight: 225 kg

Transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, storage shelf trolleys, visible trolleys, visible storage box shelves -Magazine trolley: for open-fronted storage bins, double-sided -Chassis: 2 swivel castors with brakes / 2 fixed castors -Accessories: incl. storage boxes see photos -Dimensions: 1100/500/H1590 mm -Weight: 59 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Mounting plate: with dovetail guide -Clamping surface: 1955 x 1040 mm -Height: 110 mm -Dovetail: 27 to 45 mm / 35 mm high -Pin opening: 47 x 47 mm -Quantity: 2x mounting plates available Price: per piece -Transport dimensions: 1955/1040/H110 mm -Weight: 1288 kg

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor clamping rail: 2 pieces -Groove width: 16 mm, length 370 mm -Hole spacing: 460 mm / Ø 16 mm -Dimensions: 505/55/H70 mm -Delivery/Price: complete -Dimensions: 505/55/H70 mm -Weight 3.4 kg/piece

Gear motor, electric motor, electric gear motor, spur gear motor -Condition: Gear motor is unused -Speed: 215 rpm -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Protection class: IP55 -Type electric motor: Loher Flender DNGW-132SB04M -Gearbox type: Flender Himmel FZC61-K4 -Dimensions: 870/440/H450mm -Weight: 143 kg

gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustment gear: Lenze type 11.433.16.16.2 1/88 17-3.3 rpm -Gearbox: Lenze Type 12.603.16.1.1 -Engine HEW type: EEXF 90L/6 0.95 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm -Weight: 66 kg

gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustable gear: Lenze type 11 333 13 16 2 18-3.7 rpm -Gearbox: Lenze Type 12 603 16 1 1 -Engine HEW type: EEXF 80L/4 0.75 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm -Weight: 66 kg

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Helios, outside micrometer -Measuring range: 0-25 mm -Reading: 0.01 mm -locking device -Number: 2x micrometer available -Price: per piece -other sizes: also available -Case dimensions: 150/75/H25 mm -Weight: 0.3 kg/piece

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: Transport trolley, 4 pieces -Load capacity: 5 t per transport chassis -Rollers: Ø 77 x 70 mm -Submission/Price: complete -Steering mechanism: in stock, can be supplied for an additional charge, see ID 35935 -Dimensions each: 655/560/H95 mm -Weight: 59 kg/pc.

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Machine transport rollers: armored rollers 4 pieces -Load capacity: t -Rolls: Ø 30 x 70 mm -Shipping/Price: complete -Dimensions each: 270/130/H90 mm -Weight: 12.7 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Machine transport rollers: armored rollers 2 pieces -Load capacity: t -Support height: 100 mm -Rollers: Ø 83 x 98 mm Methacrylate -Shipping/Price: complete -Dimensions each: 360/185/H100 mm -Weight: 12.9 kg/piece

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Art.No.: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Engine manufacturer: HEW type DEX100L/4K -Manufacturer gearbox: KEB type G22A EX-04-2007/14431801.001 -Speed: 350 rpm -Power: 2.2 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 EX -Dimensions: 700/250/H310 mm -Weight: 60 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Cast iron -Bores: Ø 28 mm, groove 228 x 28 mm -Dimensions: see photo -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 300/200/H100 mm -Weight: 15 kg/pc.

Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Peter Hirt, Inductive displacement sensor with measurement protocol, original packaging -Type: T501F -Number: 4x measuring probes available -Price: per piece -Cardboard dimensions: 160/120/H30 mm -Weight: 0.2 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 74 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Number: 2x magnetic prisms available -Price: per piece -Dimensions: 74/50/H55 mm -Weight: 1 kg/pc.

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 82 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Number: 3x magnetic prisms available -Price: per piece -Dimensions: 82/45/H63 mm -Weight: 1.3 kg/pc.

Electric motor, three-phase motor, brake motor -Manufacturer: Fimec, electric motor with brake -Type: H90L6T -Power: 11 kW -Speed: 900 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP54 -Brake: -Number: 2x motors available -Price: per piece -Dimensions: 355/200/H235 mm -Weight: 17.8 kg

Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Linde, forklift mast, unobstructed view mast from front forklift type H30T -Load capacity: 3000 kg -Lifting height: approx. 3500 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 70 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Number: 3x magnetic prisms available -Price: per piece -Dimensions: 85/45/H65 mm -Weight: 1.3 kg/pc.

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter, ferrite adapter, ferrite filter -Manufacturer: Reis Robotics, Ferrite Adapter Filter, Ferrite Filter -Type: unfortunately without a type designation -Number: 3 filters available -Price: per piece -Dimensions: 150/140/H80 mm -Weight: 0.7 kg/pc.

Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

Key data: 390 mm, 390 mm

Grinding machine Löwer Type: HBS 400 Year of Make: 1999 CE Versatile single-belt sanding machine for both adaptation grinding heavy glulam beam as well as for calibrating to measure. Grinding width max. 390 mm Grinding height max. 390 mm 1 sanding shoe from above Grinding motor 7.5 kW Sanding belt dimensions 300 x 1800 mm Transport carpet for material feed Feed rates 6/11/16 m/min. Extraction connection diameter 150 mm Constant table height for the use of roller conveyors pneumatic abrasive belt oscillation pneumatic abrasive belt clamping Special HBS sanding shoe for adjustment grinding for thickness differences of up to 4 mm or crooked workpieces Selector switch adaptation grinding / calibration Motorized workpiece thickness adjustment with rapid traverse Automatic workpiece thickness scanning Heavy, robust design With some abrasive belts in 60 and 100 grit  ...

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995

Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994