h s m used for sale

740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million

2 x Husky HL500RS80 2016 injection moulding machines

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

Offer 25282 Specifications: - Saw blade diameter 600 mm - Cutting area at 90° - 190 x 190 mm - 100 x 310 mm - mitred at 45° - 170 x 170 mm - 100 x 220 mm - Saw blade speed 2800 rpm - Drive approx. 4.5 kW - Space requirement approx. W 1470 x H 1800 x D 1550 mm - Weight approx. 450 kg - Digital degree positioning display - Pneumatic device with pneumatic clamping cylinder -Saw blade - Discharge roller conveyor with dimension stop + digital display 5000 mm

Key data: 600 mm, 400 mm, 420 mm

Hermle UWF 900 Universal CNC Milling Machine BAZ Year of Make: 1996 Machine number: 11410 Machine weight: 2,900 kg Availability: By arrangement. Machine is still energized and in perfect condition.

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg

The machine is in good technical condition, testing possible after prior agreement. including a new chip remover

Pressure valve, pressure gauge, pressure indicator -Measuring range: 1-25 l/min -Fixture: Digital display -Dimensions: 80/50/H110 mm -Weight: 0.8 kg

Electric motor, three-phase motor with 2 speeds -Power: 0.3 kW -Speed: 1375 rpm -Shaft: Ø 22 mm -Construction: B3/5 -Protection class: IP 33 -Dimensions: 265/142/H163 mm -Weight: 9.5 kg

The machine is in good technical condition, testing is possible after prior agreement. The machine can also be sold with a stock of measuring probes, clamping plates, and connecting elements.

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

A CNC contour processing system HML for precise edge processing and contour milling of technical laminates or printed circuit boards (PCBs) is available. Weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

Heckert CWK 400 Built in 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool Changer Rotary table 400 x 500 mm, Conveyor Weight 12.5 t.

gebr. V. Processing Center, Fabr. Homa, Type Ecocenter V350 x-travel 450 mm y-travel 350 mm z-travel 350 mm Table size 650 x 350 mm Speed 6000 rpm Control Fanuc 0M

Guide and tension spindle lathe Lathe Lathe Weisser Heilbronn Junior Heidenhain Control with cabin incl. oil pan Last test 05/2025 (see picture) The machine is in perfect condition and can be delivered nationwide for € 350. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 3x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg

Height=0.98 m, Overall length= 1.17 m, Overall width= 0.58 m, Net weight= 175 kg,

Machine data: Control Heidenhain TNC 355 Year of manufacture 1989 Travel: X 600 mm travel Y 450 mm travel Z 400 mm travel Spindle speed 20 – 4000 min-1 Angle table size 850 x 440 mm Swivel table 650 x 395 mm Electronic handwheel The machine is still energized and in good condition.

Three-phase motor, electric motor -Power: 3.6 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 385/295/H250 mm -Weight: 37 kg

Hurco VMX 24, YOC 2003 Travel X/Y/Z: 610mm/508mm/610mm Rapid traverse X/Y/Z: 35m/35m/30m Feed: 7600mm/min Table dimensions X/Y: 760mm/510mm Max. table load: 700kg Tool holder: SK40 Tool Positions: 24 Spindle speed: 10000rpm Power: 7.5kW Dimensions approx. 2200mm/2400mm/2500mm Weight: approx. 5000kg Control: Ultimax 4 (Documentation available)

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1410 rpm -Shaft: Ø 19 x 40 mm -Design: B3, explosion-proof -Protection class: IP 55 -Quantity: 1 available -Dimensions: 320/163/H255 mm -Weight: 24.1 kg

weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Voltage: 240/415 V -Power: 0.12 kW -Speed: 680 rpm -Shaft: Ø 15 x 85 mm -Construction: B14 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 295/185/H140 mm -Weight: 7 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 275/190/H155 mm -Weight: 12 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg

Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.

Edge magazine for edge banders -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg

Hermle milling machine

Rental: Wooden crate for transport EOS M270/M280

Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece probe renishaw RMP60. Centerline probing, simultaneous machining, chip conveyor. 20 tools. Table diameter 200mm. X and Y overhauled.

Gear motor, electric motor -Speed: 65 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 1x engine available -Price: per piece -Dimensions 360/180/H175 mm -Weight: 12.2 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg

Reference Num.: 4211 Brand: Heidelberg Type: GTOZP 52+ Construction year: 1987 Impressions: 32 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 2,190 mm, Width: 1,450 mm, Height: 1,550 mm Total weight: kg 2,850 / lbs 6,283 Power: KW 4 / hp 6 Equipment: - Nummerier- & Perforiereinrichtung - Wendung 2:0 / 1:1 - VARN Kompac III - Puderapparat - Doppelbogenkontrolle

Reference Num.: 4199 Brand: Horizon Type: Collator AC-6000 Available: directly Status: Not in production Location: Deutschland

Manufacturer: Huber & Grimme Model: HG3000 TW Year of Manufacture: 2000 Drive Type: Servo Motor Type: NUM / HD Voltage: 230 / 400 V Frequency: 50 Hz Power: 16.5 kW Material to be machined: Aluminum Machining Range - X-axis: 500 mm - Y-axis: 3000 mm - Z-axis: 400 mm Machine Concept - Type: Portal system - Workholding / Machining Option: Exchange table Performance - Spindle speed: 20,000 rpm - Axis speed (X/Y/Z): 40 m/min Tooling and Clamping - Clamping system with zero-point possible: No - Tool count / Magazine slots: 10 / 12 - Tool holder taper: Jäger WK 19 Machining Capabilities - Number of sides machinable: 5 sides - Thread cutting capability / Max diameter: Yes - Integrated 3D measuring system: No Control and Software - Control system: Num - SolidWorks / CAM-compatible post-processor: Yes - Data backup / data transfer concept: No Cooling & Lubrication - Cooling  ...

Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible.

A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible.

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 465-2325 rpm -Motor: adjustable -Design: B5 angle -Drive shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 545/210/H180 mm -Weight: 22 kg

Factory no. 021172, table dimensions 6000x2200 mm, feed x 6000 mm, feed y 2200 mm, feed z 1000 mm, spindle speed 0-6000/min, tool magazine 40 pcs, tool weight 25 kg, power 65 kW, weight 47570 kg, Results from the geometric measurements of this machine.

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

Electric motor, three-phase motor -Power: 0.95 kW -Speed: 950 rpm -Shaft: Ø 24 mm -Design -Protection class: IP 54 -Dimensions: 320/180/H250 mm -Weight: 16.5 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Design: B3 / B14 -Protection class: IP 44 -Dimensions: 270/160/H195 mm -Weight: 10.9 kg

Amsonic Hamo ECS40 Closed circuit cleaning system. Hydrocarbon-based solvent as cleaning medium Medium is distilled internally so that high medium quality is always available Process: Spraying, steam, flooding, oscillating, rotating, ultrasonic, vacuum drying. In any order and intensity.

Year of manufacture 1985 7 drilling spindles Adjustable drill spindle spacing incl. base electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.

Year of manufacture 1989 4 drilling spindles Adjustable drill spindle spacing electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: - -Dimensions: 420/350/H290 mm -Weight: 72 kg