h s m used for sale

Eyeletting machine Make Hang Model Piccolo III Year 2000 eyelet model 24 (4mm) Available direct

Eyeletting machine Make Hang Model Piccolo Year 1990 eyelet model 8E (5mm) Available direct

Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction

x-travel: 530 mm y-travel: 430 mm z-travel: 400 mm spindle taper ISO: 40 milling-head swivable +/-: boring spindle: : 650x440 mm table - swivable: Grad turning speeds: 45-2000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Paper Lift

Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

bookpress Make Hercules Model 5040 Year 1950's Size 400 x 500 mm Available Direct

bookpress Make Hercules Model 4030 Year 1950's Size 300 x 400 mm Available Direct

Corner milling machine, radius milling machine for machining the corner edges. Banding thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. pull-out workpiece support Dimensions: approx. 700 x 600 x 1300 mm Weight: Approx. 140 kg Suction nozzle: 70mm

Heinen EPC/II Diana Control EM1 Interface Module (PLC) for Jagenberg Diana Pro. Used and tested. Type: 63430-1.0-000 / SN 155 /

Heinen EPC/II Diana Control BM1 063425-1.0-000 Interface Module (PLC) for Jagenberg Diana Pro. Used and tested.

x-travel: 2750 mm y-travel: 400 mm z-travel: 325 mm spindle taper ISO: 50 throat: 450 mm turning speeds: 31,5-2000 U/min Feed: 0,4-200 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1500 mm gear width: 550 mm max. module: 25 min. module: 2 workpiece weight max.: 6000 kg max. number of teeth: 432 min. number of teeth: 12 table diameter: 990 mm grinding wheel size: 400 mm total power requirement: 75 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: m With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control module, interpolation box HEIDENHAIN EXE 650B X50/10 4 642 864 used, tested ! Dimensions: 220 x 80 x 60 mm

Gear Motor HANNING ELEKTRO-WERKE 2B00682 G8A84 ( 2B00682G8A84 ) 0.18 / 0.25 kW 69 / 140 rpm 380 V shaft diameter: Ø 19 mm 2 speeds !' used, tested !' Dimensions: 315 x 210 x 150 mm

Axial piston motor, hydraulic motor ORSTA 314 685 ( 314685 ) 200-16-12 TGL 10865 P max 200 bar n max 1500 rpm shaft Ø 35 mm flange Ø 280 mm New !' Dimensions: 470 x 300 x 280 mm

Main Control Pressure Relief Valve ORSTA 10-10 TGL 26238/60 ( TGL26238/60 ) Pn 32 MPa with pressure relief valve 10-3.02.09 TGL 26233 New ! Dimensions: 145 x 80 x 60 mm

illuminated measuring device for length displays HEIDENHAIN OTM1 M5 AOL1X Dimensions: 100 x 90 x 70 mm

illuminated measuring device for length displays HEIDENHAIN OTM1 M5 COL5X Dimensions: 100 x 80 x 70 mm

Control solenoid, electromagnet ORSTA G 60 - H ( G60-H ) TGL 32094 117,6 N 24 V Gs 14000 circuits/h New ! Dimensions: 115 x 65 x 80 mm

Control solenoid, electromagnet ORSTA Z 60 - H ( Z60-H ) TGL 32094 117,6 N 100 V Gs 14000 circuits/h New ! Dimensions: 115 x 65 x 80 mm

Control solenoid, electromagnet ORSTA GM 1 ( GM1 ) 39.2 N 60 V Gs 10000 circuits / h Dimensions: 140 x 55 x 55 mm

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Control solenoid, electromagnet ORSTA GM 16 ( GM16 ) 61.8 N 24 V Gs 3600 circuits/h Dimensions: 260 x 120 x 155 mm

Control Solenoid, Electromagnet ORSTA GM 2.5 ( GM2.5 ) 14.1 N 220 V Gs 6000 Circuits / h Dimensions: 190 x 75 x 100 mm

Control Solenoid, Electromagnet ORSTA GM 0.4 ( GM0.4 ) 7.8 N 24 V Gs 6000 circuits /h Dimensions: 85 x 40 x 60 mm

Control solenoid, electromagnet ORSTA GM 1 ( GM1 ) 15.7 N 24 V Gs 6300 circuits / h New ! Dimensions: 150 x 55 x 55 mm

Control solenoid, electromagnet ORSTA GM 1 ( GM1 ) 32.4 N 24 V Gs 4000 circuits / h stroke; 6mm New ! Dimensions: 150 x 55 x 55 mm

Control solenoid, electromagnet ORSTA GM 1 ( GM1 ) 35.3 N 220 V Gs 10000 circuits/h Dimensions: 150 x 55 x 55 mm

Control solenoid, electromagnet ORSTA GM 2.5 ( GM2.5 ) 29.4 N 24 V Gs 8000 circuits/h unused ! Dimensions: 190 x 75 x 100 mm

Control magnet, electromagnet ORSTA GM 2,5 ( GM2.5 ) 15.7 N rod diameter: Ø 8 mm rod thread: 2x M8 x 1.25, length: 24 mm stroke: 16 mm flange diameter: Ø 30 / 73 mm bolt circle diameter: Ø 50 mm per flange 3x threaded hole: M6 x 1.0, Depth: 10 mm 24 V DC 6000 circuits/h New ! Dimensions: 184 x 73 x 97 mm

Control solenoid, electromagnet ORSTA G 60 - H ( G60-H ) TGL 32094 135 N 24 V Gs 14000 circuits/h New ! Dimensions: 100 x 60 x 100 mm

Control solenoid, electromagnet ORSTA G 45 - H ( G45-H ) TGL 32094 65 N 24 V Gs 14000 circuits/h used ! Dimensions: 80 x 45 x 85 mm

Control solenoid, electromagnet ORSTA G 45 - H ( G45-H ) TGL 32094 63.7 N 5.6 mm 24 V Gs 14000 circuits /h New !' Dimensions: 80 x 45 x 85 mm

Control Magnet, Electromagnet VEB ELEKTRO - COMPONENTS GM 2.5 ( GM2.5 ) 6.3 kp 24 V Gs 10000 Circuits/h Dimensions: 155 x 75 x 75 mm

Planetary Mixer Autumn HRV-S 2-7 Power 1.5 kW Speed adjustable via frequency converter with control cabinet Wall scrapers Vacuum pump mounted on stainless steel plate Very good condition, straight from production

Two head paperdriller Make Hang Model 136DK Year 1990 Details 2 head paper driller with fixed 80 mm distance with tabulator Operation Electric footswitch Available Direct

Two head paperdriller Make Hang Model 136D Year 1970 Details 2 head paper driller with fixed 80 mm distance with tabulator Available Direct

Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg

Horizontal broaching machine RAWT 25 x 4000 x 500 company Hoffmann Year of manufacture 2000 Max. Operating pressure: 70bar, filling quantity hydraulic fluid: 630l, with loading gantry and sliding guide with carriage Find more here - /

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

Depaneling machines manufactured by Holzer GMBH for sale. Model Low 4233 D XXL Year 2015 - Large work surface: 700 x 400 mm - Rigid welded steel frame - Highly dynamic linear motor axis - Quick product change possible - Flexible PCB mounting systems - Cutting process with discs and / or shank tools - Separates any PCB material - Laser axis measurement - Individual special sizes possible The highly dynamic depaneling machine LOW 4233 XXL is especially suitable for medium to high product volumes and meets growing requirements in the production process. Printed circuit board benefits from a wide variety of materials which are made using low-dust and low-stress sawing and milling techniques with the highest product flexibility, precision and throughput separation. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine ...

2001 & 2002 HYUNDAI HIT 15 2X HYUNDAI HIT 15 turning machines equipped with QUICK LOAD portal and two stockers (loading and unloading) Both machines are currently working. Ordinary maintenance can be proved by invoices. Turning machine G1 Hyundai HIT-15 (single spindle with tailstock, no axis C) Year of manufacture: 2001 Turning machine G2 Hyundai HIT-15 (single spindle with tailstock, no axis C) Year of manufacture: 2002 Quick Load portal Year: 2003 Find more here - / Contact us at -

2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - / Contact us at -

2016 Hexagon OC 322 Measuring machine The machine is in perfect working condition. The 2016 Hexagon OPTIV CLASSIC 322 is a type of coordinate measuring machine (CMM) manufactured by Hexagon Manufacturing Intelligence. This machine is used for precision measurement and quality control in manufacturing processes. PRODUCT DESCRIPTION The Optiv Classic 322 combines optical and tactile measurement in one system (optional touch-trigger probe). The system supports multi-sensor measurements using the Vision sensor (CMOS colour camera, motorised CNC zoom) and the touch-trigger probe HP-TM. The Optiv Classic 322 provides easy pallet station integration with good accessibility to the measuring table from all sides. Measurement software is PC-DMIS. FIELDS OF APPLICATION • Shop floor and inspection room • Versatile geometry measurements and GD&T analysis DESIGN Design principle : Ben ...

CTK 2200 Kaschieranlage: - Type: CTK 2200 - Nominal Width: 2,200 mm - Product Width: 2,200 mm - Working Height: 1,220 mm ± 50 mm - Processing Side: One-sided from above - Control Side: Right - Fixed Edge of Machine: Right - Machine Speed: 10 – 30 m/min - Max Production Speed: 25 m/min - Passage Height: 80 mm - Dimensions: - Total Width: 3,000 mm - Installation Length: 11,000 mm - Working Width: Max 2,150 mm - Height: 5,700 mm - Weight: Approximately 9,500 kg - Load Capacity: 80 kg - Maximum Cycle Speed: 10 cycles/min - Power Supply: 400 V / 50 Hz, 3 phases, and control voltage 230 V / 50 Hz + 24 V/DC​ In the event that the buyer wishes to laminate the panels on both sides, we can also offer a suitable stacking turner. Seen on the last picutre Find more here - / Contact us at -