129,270 used machines on RESALE, but how to find them? Machine Search
Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible.
grinding range: 2 - 13 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 10 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier ...
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm
A Hermann Rothenburg stirring and mixing vessel is available. Operating pressure vessel/jacket: 2bar/0.5bar, volume vessel/jacket: 1000l/180l, max. temperature vessel/jacket: 180°C/180°C. On-site inspection is possible.
Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site
Key data: 1050 mm, 900 mm, 980 mm
Mazatrol Smooth G Travel X-axis: 1,050 mm Y-axis: 900 mm Z-axis: 980 mm Distance spindle nose to pallet center 100-1,080 mm Distance from spindle centerline to pallet surface 100-1,000 mm Pallet Changer – Palletech 6 pallets Pallet size: 630 x 630 mm Setup station NC rotary table 360,000 Items Milling spindle Drive power 30 kW Max. spindle speed 8,000 rpm Tool magazine 160 tool positions BT-40 More options Tool length measurement Synchronized Threading Detachable handwheel Coolant system and chip conveyor Conveyor 70 bar high pressure pump separate tank with filter
X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor
Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark
The vessel is purposed for the mixing of liquids, it is cylindrical shape with dish type top and bottom. All product contact parts are manufactured from stainless steel AISI 316L or AISI 316Ti. Internal surfaces have finish of 320 grit, polished, with Ra = 0,4 µm, welds are ground down smooth and buffed. External surfaces have finish of 120 grit, Ra = 1,6 µm, welds are ground down. The vessel is fitted with 3pcs stainless steel legs made from AISI 304 . Comes equipped with top mounted motor and three-bladed propeller agitator for even mix and for keeping products homogenous - agitator propeller mixing element type with shaft and drive. Mixer is in overall excellent condition – little use, serviced and well looked after. Technical characteristics: · Net capacity: 1000 litre · Total volume: 1200 litre · Working volume: 1000 litre · Working tempe ...
Hanselifter E-MES150-15-05 Electric Box Lifter Minilift 150kg 0.15 kW 2x12V Excellent maneuverability for tight spaces Electronic height change of the platform Operating terminal for easy handling when lifting and lowering Increased safety thanks to approx. one and a half metre supply cable and an integrated charger with overload protection Charging possible at any standard socket With parking brakes on both swivel castors Dimensions L x W x H: 870 x 600 x 1790 mm Drive type: semi-electric Overall height: 1790 mm Tyres: polyurethane Ground clearance: 70 mm Net weight: 66 kg Fork length: 475 mm Lifting speed: 50 mm/s Lifting height: 1500 mm Load center of gravity: 230 mm Platform height max.: 1500 mm Platform dimensions L x W mm: 475 x 600 mm Wheelbase: 680 mm Load capacity: 150 kg Turning radius: 850 mm You can find more box jacks - new and used - in our shop! ...
Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer; MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...
HAMBURGER LINE – HANDTMANN VF-612 + VERBUFA TYPE MBF-1 MACHINE AFTER GENERAL OVERHAUL YEAR OF PRODUCTION 12-2012 – START 2013 CURRENTLY UNDER TECHNICAL INSPECTION CONDITION OF NEW MACHINES WARRANTY FOR COMPONENTS AND MECHANICAL PARTS 3 - MONTHS
Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg
Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg
Computer monitor, operating unit, operating unit, keyboard, screen, control, industrial monitor -Manufacturer: Cybernet -Accessories: swivel arm, multiple adjustable -Dimensions: 600/200/H365 mm -Weight: 10 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46.9 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP54 -Dimensions: 475/210/H195 mm -Weight: 29 kg
Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg
Height=2.27 m, Overall length= 1.9 m, Overall width= 2.25 m, Net weight= 1400 kg,
Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China.
Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out ...
Key data: 16000 , 10131 , 150
Presse à injecter HAITIAN 1600 T Type : MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T
Mitutoyo 570-313 Digital Height ruler
Mitutoyo HDS-G24 Digimatic Height Gauge HDS
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg
Vertical Machining Center MINIMILL HE - travel X (mm) : 406 - travel Y (mm) : 356 - travel Z (mm) : 381
1 JAMES HEAL Martindale abrasion resistance and pilling testing machine, 4 testing positions,
General SKU401W1244 LocationBarneveld MakeAva-Huep TypeHTC2100 No.5974 Year of construction2009 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breakercheck 3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,36 m Weight5000 kg Floorspace5,72x1,76 m Extra SpecificationsWithout outlet lith. paddles are equipped with hardop welding. Powder turbo mixersAva-HuepMixers > Powder turbo mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working conditio ...
General SKU321S565 LocationBarneveld MakeHerbst Maschinenfabrik GmbH (D) TypeHRV-15 HO No.3103 Year of construction2000 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume15 Ltr. Motor0.37 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftcheck With scrapercheck Motor0,37 kW With pancheck Capacity15 ltr Pan sizesdia. 280x280mm Outletdia. 25mm With jacketcheck With electric heating3 kW With hydraulic liftingcheck With vacuum pumpcheck Motor0.12 kW 220-255/380-440 Volt MaterialStainless steel Planetary mixers Closed stirring vesselcheck Capacity15 ltr Vessel sizesdia280x280mm Dished bottomcheck Outletdia. 25mm With homogeniser900 Watt Information Mounted on wheelscheck With switchgearcheck Total height1,9 M Weight300 Kg CEcheck Floor space1,0x0,9 M Extra Specificationsincluding homogenizer P ...
General SKU294W555 LocationBarneveld MakeDan-Process A/S TypeHPLC 300 No.H3001000-125 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,30 m Weight300 kg CEcheck Floor space1,0 x 1,0 m ATEX compatiblecheck Extra SpecificationsVolume 71 l. : : Allowable temperature 0-50°C. : : Allowable pressure 100 bar g. : : Test pressure 143 bar g. : : Diameter 125 mm. : : Max bed length 1000 mm : : This column was part of a system together with SKU: 294W550 and 294W554 : : Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
General SKUR0328 LocationBarneveld MakeBüter Hebetechnik GmbH (D) TypeH 11-06 No.A 11 11720 Year of construction2012 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information Total height0,7 M Weight750 Kg Floorspace2,5x1,6 MLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU420U1321 LocationBarneveld MakeMondomix TypeA05 No.1283 Pressure Working pressure8 Bar Main Features MaterialStainless steel Motor1.1 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x125 mm Inlet365x310 mm Outletdia. 19 mm Motor± 1,1 kW With frequency controllercheck With pumpcheck With Lobe pumpcheck Motorcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck Floorspace1,60x0,55 m Total height1,60 m Weight200 kgFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU300U891 LocationBarneveld MakePamasol TypeHandcrimper 0555/100 No.11973-01 Year of construction2014 Main Features MaterialStainless steel Information Total height1 m Weight30 kg CEcheck Floor space0,45x0,45 m ATEX compatiblecheck Extra SpecificationsFunction: The machine is suitable for research and small-scale production. Containers are placed on the lifting table manually. When the lifting table is raised, the container moves into the crimping head. In the upper end position, the container is sealed with the valve. The crimper seals valves with the same precision and speed, whether they have a tinplate or aluminum disc. Once crimping is complete, the lifting table is lowered, and the container is removed. The machine is ready for the next crimping. Technical Data: Container Diameter: max. 66 mm Container Height: max. 260 mm MiscellaneousPamasol Wili MäderMis ...
General SKU324U769 LocationBarneveld MakeHecht technologie Type7_271801 Mach.No.207656 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Miscellaneous MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Capacity± 1500Ltr. Motor0.03kW,230Volt Information Year of construction2013 CEcheck Floor space2x1,1m Total height2,17m Extra Specificationsunused This article is a disposable film insulator for filling small quantities. The device is equipped with a replaceable cover. Extra parts are provided during the sale, including many covers. Additionally, there is a fan with a filter installed. MiscellaneousHechtMiscellaneous > MiscellaneousBrand > Hecht What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...
General SKU227S107 LocationBarneveld MakeHosokawa Alpine (D) TypeLGM 20 ( Long Gap Mill ) No.P1172095 Year of construction2009 Main Features Motor500 KW Specified Features - Fine Impact Mill Grindercheck Rotor sizeDia. 1950x800 mm Grinding room sizeDia. 2000x760 mm With hoppercheck InletScrew (Schneckenbau Prestel) (2x dia. 125mm) Motor500 kW 400 Volt Speed1100 rpm Fine Impact Mills MaterialMild steel Information Total height3,0 m Weight22000 kg CEcheck Floorspace4,9x2,4 m ATEX compatiblecheck Extra Specificationsincluding Reitz fan type KXE 160-063030-00 (2009) 630 m3/h 2980 rpm 200 kW 400/690 volts including cyclone and heating unit with burner monitoring (as is ) Fine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...
General SKU294W553 LocationBarneveld MakeBio-Rad Verdot TypeColumn Easy Pack No.04-300-151 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4435 (316L) Filtercheck Information Mounted on wheelscheck CEcheck Floor space0,70 x 0,70 m Total height2,10 m ATEX compatiblecheck Extra SpecificationsVolume 42,4 l. allowable pressure 10 bar. test pressure 14,3 bar. allowable temperature 0-40°C, : Diameter 300 mm, max bed height 900 mm, with manual lid lifter Miscellaneous filtersBioRadFilters > Miscellaneous filtersBrand > BioRad What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...
General SKU294W554 LocationBarneveld MakeDan-Process A/S TypeHPLC 200 No.H2001000-110 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,30 m Weight300 kg CEcheck Floor space1,0 x 1,0 m ATEX compatiblecheck Extra SpecificationsVolume 37 l. allowable temperature 0-50°C. allowable pressure 100 bar g. test pressure 143 bar g. flow rate 120 l/h. Diameter 200 mm, max bed length 1000 mm : this column was part of a system together wit sku: 294W550 and 294W555 Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...
General SKU294W559 LocationBarneveld MakeDan-Process A/S TypeHPLC 100 No.H1001000-128 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,50 m Weight250 kg CEcheck Floor space0,80 x 0,80 m ATEX compatiblecheck Extra SpecificationsVolume 9 l. allowable temperature 0-50°C allowable pressure 100 bar g test pressure 143 bar g. flow rate 30l/h., Diameter 100 mm. max bed length 1000 mm. inlet and outlet ball valve this column was part of a system together wit sku: 294W545 Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...
General SKU250X199 LocationBarneveld MakeOuto Kumpu TypeHS10-64:50 No.07-312 Year of construction2007 Main Features MaterialStainless steel Dia/Width600 mm Specified Features - Metal detector MaterialStainless steel Metal detectorcheck Electric capacity2 kW, 220 volt Tunnel sizes600 Belt width600 mm Belt length300 mm With motor2 kW, 180 volt, 1750 rpm With variable speed drivecheck InletDN100 Outlet170x160 mm Information Mounted on framecheck Total height1,00 m With switchcheck Floorspace1,20x1,30 m Extra Specificationsbelt is equipped with permanent magnetic rollers.Metal detectorsOuto Kumpu Technology USAPackaging machines > Metal detectorsBrand > Outo Kumpu Technology USA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...
General SKU382X963 LocationBarneveld MakePharmatech No.SL10244 Year of construction2001 Main Features MaterialStainless steel Motor2.5 KW Height3500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting + tilting machinecheck Max. weight250 kg Lifting height3500 mm Mechanical drivecheck ( 0.25 kW to tilt the vessel) Hydraulic drivecheck (2.6 kW to lift the vessel) With hydraulic unitcheck Motor2.6 kW Suitable for product sizesDia 550 mm Lifting/tilting machines Capacity250 kg Information Mounted on framecheck With switchcheck Floorspace1 x 2 m CEcheck Total height3,8 m Weight1200 kg Extra SpecificationsThis hoist was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech floor scale, SKU: ...
Type: MA16000/15800 Monitor: KEBA V3 Year : 2011 Screw diameter: 140 mm Shot volume: 9683 cm3 Injection weight : 8825 g Bettween tie bar HxV: 1550 X 1430 mm Maxi Mold Height: 1500 mm Min Mold Height: 700 mm Ejector stroke: 400 mm Total Clamp Open daylight: 3100mm 4 corepulling 4 Cascade Injection
marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.5 kg
marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg
maximum number of results exceeded
please refine your search
