h s m used for sale

max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

x-travel:800/945 mm y-travel:800 mm z-travel:600 mm spindle motor:27 kW spindle turning speed range:10 - 8000 U/min spindle taper ISO:40 c-axis:360.000 x 0,001 table load capacity:600 kg table clamping surface::800 630 mm total power requirement:55 kW weight of the machine ca.:16 t Machine with Heidenhain iTNC 530 CNC control for 5 axis - pendulum operation with turn- swivil table left and fixed table right - tool changer for 30 tools - coolant device, chip conveyor - complete splash housing

x-travel:6.300 mm y-travel:2.000 mm z-travel:2.700 mm tool taper:ISO 50 surface area:7.000 x 3.000 mm turning speed range:60 - 4.000 U/min power capacity:22/30 kW feeds:0 - 10.000 mm/min rapid traverse:20.000 mm/min Tool changer:80 max. workpiece weight:8.000 kg Plate clamping area 7,000 x 3,000 mm CNC rotary table 1,500 mm Orthogonal milling head Deep drilling unit IKZ Paper belt filter Measuring probe

groove width:- mm x-travel:1300 mm throat:- mm y-travel:150 mm z-travel:150 mm spindle speed::50/6000 upr tool taper:SK 40 numbers of positions in the tool changer:8-fach weight:2.500 kg Operating hours: 2,100 h Clamping hydraulics Pendulum operation possible 8-position tool changer

x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg

x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm

x-travel:1270 mm y-travel:660 mm z-travel:610 mm table surface area:1500 x 660 mm table load:1,3 t control:ULTIMAX 4 turning speeds:10000 1/min spindle:15 kW Tool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/min tool change unit:24 Pos. total power requirement:30 kVA weight of the machine ca.:9,5 t dimensions of the machine ca.:4,8 x 4,56 x 2,95 m vertical machining center, el. handwheel, chipconveyor,

x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

x-travel:800 mm y-travel:700 mm z-travel:600 mm table load capacity:800 kg control:SIEMENS 840D shopmill turning speeds:12.000 1/min tool adaptor:HSK 63 rapid traverse:50 m/min tool change unit:30 Pos. electr. connected load with add. coolant:56 kVA weight of the machine ca.:9,5 t transport measurements machine:4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h)

x-travel:2500 mm y-travel:1000 mm z-travel:750 mm table surface area:3220 x 1000 mm Workpiece weight approx.:3000 kg spindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/min feed speeds:1- 30000 mm/min rapid traverse:30 m/min total power requirement:40 kW dimensions of the machine ca.:6,9 x 4,1 x 3,7 m weight of the machine ca.:21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders

automatic switch plate 1x saw unit with saw, head and saw valve 40/80 1x turning unit with turning valve 30/60 with flange 9x units 30/60 with valve normal and flanges 5x units 20/50 with valve normal and flanges 1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500; 1x hydraulic unit 1 Knoll oil filter Without collets and ejectors, without platform and without tool monitoring. supplied tooling may differ from the pictures. We can send you more pictures. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB 32-45/16 CNC Yob: 2013 Electro-hydraulically controlled, fully automatic Extract from offer: Coolant system with chip conveyor and Knoll vacuum rotation filter High pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice) 1 bar loading magazine type IEMCA: bundle loader (yob. 2011) 1 Sawing unit: Saw blade D250mm 2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 Vertical support 26/80 with 36° angular position 2 drilling head 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. ...

pressure:040 t stroke:8 - 50 mm no. of strokes:50 - 300 /min distance between columns:600 mm distance table/ram, max. stroke up, adjustment up:285 mm table surface area:590 x 500 mm hole in the table:590 x 40 - 100 mm table height over floor:860 mm column travel -side:280 mm ram surface:590 x 380 mm ram adjustment:80 mm material width of feeder:150 mm power requirement:7,5 kW clutch:pneumatic ram adjustment:motoric pincer feed:mechanical

pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Used single stage homogeniser made by Hoyer Pack. Capacity 600 L/H. Bal type valve. 6.5 KW motor. Set of seales and plungers ware changed lately. New 1996.

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

Many thanks for your interest in our Candy production accessories, please find below our offer: Candy production accessories New Sugar hook / wall hook on stable base plate with 4 mounting holes ex Warehouse Hess. Lichtenau

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available in stock 1 x Used Rehobot Hydraulics 1000 bar Two stage Hand Pump Type PHS-374.36. The equipment is used but in good working conditions.

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm

Hoffmann frame and slotted hole drilling machine Product name: Frame and slotted hole drilling machine Type: HR 150 Manufacturer: Hoffmann Bohrsysteme Machine number: 15306 Year of construction: 1996 Condition: used, revised, checked Technical details: - Machine height: 1,260 mm - Machine length: 1,100 mm - Machine depth: 1,300 mm - Workpiece support: 1,100 x 240 mm - Workpiece clamping: pneumatic via foot valve - max. clamping height: 150 mm (standard) - Stroke of the clamping cylinders: 10 mm - Drilling plane adjustment (Z-axis): 100 mm (pneumatic) - Drilling stroke (Y-axis): 150 mm - lateral adjustment range of the drilling unit (x-axis): 330 mm - Drill holder: Special chuck with 2 tool change inserts (1x M10 and 1x 1600) - Drill with centering tip: - 2 pieces 8 x 50 mm, 1 piece 12 x 80 mm, 1 piece slotted hole drill 8 x 20 mm - Drill speed: 2,850 rpm -  ...

Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024

Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

90 m pallet rack Jungheinrich Heavy Duty New, very good condition, see pictures Height 5 m Depth 110 cm Beam length 3.7 m Load/compartment 3800 kg Load 18000 kg Frame blue Carrier white Year of construction 2023 Negotiation price: € 15.490,-- net from stock Offer consists of: + 25 pcs. frame pre-assembled, new, depth 110 cm, height 5 m + 144 pcs. carriers, used goods, length 3.7 m, 3800 kg ballast/compartment + 288 pcs. Suspension locks + 100 concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all price ...

Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System  Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on  ...

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!