h k used for sale

Commercial dishwashers Hobart FXS-70NB defective -defective commercial dishwashers from Hobart -Model FXS-70NB -Years of construction from 2008 to 2012 -more than 30 pieces available in stock

Linear bearings, linear rails, linear guides, roller guide rails, for guide carriages, guide rails, curved guides, cam bearings, cam track bearings, profile rails -Condition: original packaging -Manufacturer: THK, arch guide with guide carriage -Type: HCR35A2RR 60/800R -Length: 800 mm Quantity: 2 pieces Price: per piece -Package dimensions: 990/230/H110 mm -Weight: 10 kg/pc.

Linear bearings, linear rails, linear guides, roller guide rails, for guide carriages, guide rails, curved guides, cam bearings, cam track bearings, profile rails -Condition: original packaging -Manufacturer: THK, arch guide with guide carriage -Type: HCR35A1RR 60/500R -Quantity: 4 pieces -Price: per piece -Package dimensions: 800/230/H120 mm -Weight: 6.1 kg/pc.

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

S.No.: 033001 Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Axial fan, Gigabox, fan, blower, high-pressure duct fan -Power: 0.75 kW -Speed: 1420 rpm -Fan wheel diameter: 445 mm Protection class: IP54 -with connection cable and on/off switch -Dimensions: 520/560/H470 mm -Weight: 53 kg

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator -Manufacturer: Opel, water cooler -Type: unfortunately not known -Hole spacing: lengthways 280 mm/crossways 445 mm -Dimensions: 460/165/H450 mm -Weight: 5.1 kg

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW  ...

offer 12001 Specifications: - Material thickness 1.25 mm - radius 180 mm - Roller center distance 63 mm - material thickness at 40 kg/mm² strength 1.25 mm - Working speed approx. 6 + 12 m/min - Drive 400 V / 0.7 / 0.85 kW - Space requirement approx. W 550 x H 1250 x D 1000 mm - Weight approx. 120 kg - with: - E - foot button

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet

Computer monitor, operating unit, operating unit, keyboard, screen, control, industrial monitor -Manufacturer: Cybernet -Accessories: swivel arm, multiple adjustable -Dimensions: 600/200/H365 mm -Weight: 10 kg

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Telescopic cylinder: 2-stage, single-acting -Piston rod: Ø 61/Ø 45 mm -Stroke total: 383 mm -Total length: retracted 340 mm -Cylinder holder: Ø 25 mm -Dimensions: 340/155/H100 mm -Weight: 11 kg

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350

workbench, work table, assembly bench -with: bench vise -Width: 1500 mm -Depth: 730 mm -Height without vise: 920 mm -Clamping jaws: 115 x 20 mm -Wingspan: 160 mm -Worktop thickness: 40 mm -Drawer: 1 -Weight: 85 kg

Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box made of: VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Weight: 10.5 kg

stacking bundler Heidelberg HSB 34; good condition; cleaned and tested; .max. Format 34x23cm, min.14x8cm; .max. Stack length unpressed 75cm; Bandwidth 12mm PP tape; Compressed air required. Stacker bundler Heidelberg HSB 34; good condition; cleaned and checked; max.size 34x23cm, min.14x8cm; max.pile lenght unpressed 75cm; band width 12mm PP-band; need compressed air.

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -Dimensions: 3000/30/H116 mm -Weight: 48 kg

Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 495 mm -Width: 398 mm -Height: 85 mm -Plate thickness: 20 mm -with support ribs -Weight: 37 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellow coupling, mechanical shrink disk -Manufacturer: Stuwe, mechanical shrink disks -Type: HSD 62-22x62 -Shaft: Ø 62 mm -Price: per piece -Number: 33 piece -Dimension: Ø 110 x 35 mm -Weight: 1.3 kg/piece

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

liter capacity: . l feed pressure: . bar coolant capacity: . l total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 1500 mm z-travel: 2500 mm Control: Heidenhain Itnc 530 total power requirement: 96 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagn ...

offer 15107 Specifications: - Total load capacity driven + rotating unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Axle distance of the support rollers adjustable - Steel support rollers - Roll diameter 650 mm - Roll width 200 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 5100 x H 1000 x D 1500 mm - Platzb. with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight applied Unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Dicer Holac Dimensions: 210x130x200cm Electrical power: 9kW

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA61240-0300 -Stroke: 300 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 3.5 kg

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

STAMFORD Synchronous Generator HVSI 824 F2 2788 KVA 10,500 V 153.3 A 50 Hz, 1500 1/min. Accessories: - 2 sets winding PT100 - AVR MA327, PFC-3 COMPLETELY RECONDITIONED, restored, windings impregnated

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

Timing belt pulley, slewing ring, -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Mounting: Bolt circle Ø 490 mm Ø 18 / M16 -Dimensions: see photos -Overall dimensions: Ø 520 x 200 mm -Weight: 79 kg

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet rack stand: Shelving system: Hovuma The scope of delivery includes: 01x pallet rack stand, used Material color: cream white Profile credit: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 6,640 mm high 870 mm deep

Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Werktoff : wetted areas in stainless steel Drive : 2,8 + 3,2 KW Speed : 1475 + 2900 rpm Worm drive : 1.1 KW / 1475 rpm

format 38 x 52 cm Year of construction 1958 Single sheet feeder Inking unit complete for printing and die-cutting Price on request. We deliver and install worldwide!

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece