h k used for sale

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to pri ...

scissor lift; Working platform lifting platform: Lifting platform HERED LIFT Type: HS1012H Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.22 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.50 m x 1.18 m Height: 2.49 m Railing folded down Height: 1.94 m Weight approx.: 2810 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25° Battery-powered 24 V / 200 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquire. Due to EU requirements, the offer is aimed exclusively at tradespeople. Depending on availability, the machine can be viewed and test driven at our warehouse. Sub ...

Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Haas HTRO D 200 G waffle squirrel Price negotiating matter Built in 2002 Location Poland Product: 110 x 47 mm, 23 ° Dimensions: -Height: -Width: -Length: Energy supply: -Performance: -Power supply: -Gas: Natural gas -Gas consumption: About 25 m ³/h -Number of baking plates: 100 -Number of baking courts per baking plate 2 -Engraving exterior: 6 x 6 mm -Plate size: -Core strength: 1.6 mm Machine is currently in production. Walterwerk/GAM/Haas

Enclosure cooler, Mclean, M280426G032, nVent Hoffmann, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a company's spare parts warehouse and had been in stock there for some time, but judging by its condition it had never been in operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aus ...

Capacity: 1000 KG, 2x12V battery

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Labeler, floor labeler Herma GmbH Stuttgart Type Labelling unit PAX 230 V, 50 Hz very good condition, directly from production! 2 identical labelers available

YEAR: 1988 HOURS: 12,000

Sirona Small X-ray / Intraoral Machine Heliodent Plus with Tube D 3507 0.4 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

NEW JOB CENTER! 480 HOURS TO POWER ON! COURSE AXIS X MM 1,000 COURSE ASSE Y MM 550 COURSE ASSE Z MM 500 TAVOLA DIMENSIONS MM 1.100x502 TAVOLA PLAN: 130-630 MM MAXIMUM LOAD ALLOWED: 700 KG ATTACK: BT40 GIRI/MIN VELOCITY SPEED 12,000 TOOL WAREHOUSE: 24 FANUC CONTROL 0i-MF COMPLETE OF TAVOLA 4/5th ASSE LEHMANN SOO EDITION 3

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

SYNTEGON CARTRIDGE FILLING LINE Year of construction: 2023 Complete line, never installed. Composed of Washing Machine Type RRU 2053 C Before the cartridges can be safely filled and closed, they need to undergo a thorough external cleaning to remove product residues and other contaminants, preventing harmful substances from compromising operator and patient safety. The designed solutions allow to externally clean a wide variety of containers, with special emphasis on fast and easy operations. PRODUCTION CHARACTERISTICS Range containers: max. 10 ml Output/h: up to 21,600 Hot Air Laminar Flow Tunnel Type HQL 3320 This tunnel, highly flexible and cost-effective thanks to their modular set-up and high level of automation, uses dry heat to sterilize a wide range of containers safely and reliably, including pre-cleaned ampoules, cartridges, and syringes using ...

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions incl. ...

1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

ULverein kiln 6,500 x 1,900 x 2,000 mm 1 Inner dimension length 6,500 mm Bidiwu73Sj 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 7,500 = 15,000 m³/h 10 electric motors 2 pcs 2x 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 110 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manua ...

Diesel generator, power generator 250KVA, make Hitzinger with a Mercedes Benz 8 cylinder V motor on a trailer sound damping. A former Viennese networks plant, is in a flawless condition. Engine very clean, Starts immediately! Start and produce power, all OK, battery OK. Own control boxes with cell and cables for power supply. Short operating hours approx. 8,000,-

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.

HERMA LABELLING MACHINE, MODEL H400 Year of construction: 2016 Ideal solution for the simplest applications, without sacrificing reliability, precision and quality. The applicators are operated via the keys of the key pad and the display, which allows entry and adjustment of applicator parameters. Included: OCS HC checkweigher from 2016 (max 700 gr). PRODUCTION Maximum speed: 25 m/min Paper passage: 160 mm Diameter label reel Standard: 300 mm (12) Maximum: 400 mm (16, optional) Core diameter Standard: 76 mm (3) Adapter: for 152 mm (6) ELECTRICAL CONSUMPTION Max. power consumption: approx. 200 W Leakage current, according to EN 60335-1 110V/AC:

Case rounding machine Schmedt Model Prärund HHS17-45 Year 1989 Size 450 mm working width and spine width up to 100 mm Available direct

Fettbackstation / Berliner Backstation consisting of 4 fat pans 1x Donut Filler 1x large exhaust hood incl. fire extinguishing function

Key data: 220 °C

Powder curing furnaces in various sizes, gas or electric 1 Inner dimension length 1500 - 6,500 [mm] 2 Inner dimensions width 1700 - 1,900 [mm] 3 Inner dimensions height 2,000 [mm] 4 Steel profile substructure 5 walls Galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Floor furnace gets 2 entry rails for tray trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 electric motors 1 - 2 pcs 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal power 14 - 99 [kW] 12 hinged or sliding doors on one or both sides 2 - 4 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock Stainless Steel INOX AISI 316 Heating Electric or Gas Heat-Resistant Fans and Heat-Resistant Bearings, Thermoblock Has Overheating Protection

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

Max. size= 52 x 36 cm, Availability= 062024, Two spindle drilling machine Hang 136 D LOT Loaded in truck or container

suitable for 60x80 cm sheets ( planks ) and also 60x40 cm boxes plug-in compressor on top up to -18 to -20 degrees Celsius without support rails Door right and left in stock in stock larger quantities please ask for price Sale only to commercial traders or export Dimensions: Height: approx. 216 cm Width: approx. 77 cm Depth: approx. 103 cm

Max. size= 38 x 26 cm, Availability= 102023, Hot stamping devices Typ ART Standard equipment Speed max. 3500 sheets/hour Weight 1200kg 400V power supply LOT Loaded in truck or container

Max. size= 38 x 26 cm, Availability= 032023, maximum size 260 x 380 mm Min. 40x70mm Max. speed 5500 s./h 380V 1.25KW Weight 1100kg Dimensions L1.68 x W1.24 x H1.85m 2 closing frame standard equipment LOT Loaded in truck or container

Max. size= 38 x 26 cm, Availability= 032023, maximum size 260 x 380 mm Min. 40x70mm Max. speed 5500 s./h 380V 1.25KW Weight 1100kg Dimensions L1.68 x W1.24 x H1.85m 2 closing frame standard equipment LOT Loaded in truck or container

Max. size= 38 x 26 cm, Availability= 122022, maximum size 260 x 380 mm Min. 40x70mm Max. speed 5500 s./h 380V 1.25KW Weight 1100kg Dimensions L1.68 x W1.24 x H1.85m 2 closing frame standard equipment LOT Loaded in truck or container

Semi-automatic bag emptying system with attachment filter Infastaub; optionally associated powder conveyor system.

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Max. size= 38 x 26 cm, Availability= 032023, maximum size 260 x 380 mm Min. 40x70mm Max. speed 5500 s./h 380V 1.25KW Weight 1100kg Dimensions L1.68 x W1.24 x H1.85m 2 closing frame standard equipment LOT Loaded in truck or container

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

working length: 2500 mm Working width: 1650 mm Working height: 850 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning machine Heavy execution Peak width 250mm Peak length 1350mm Copying facility large chuck

working length: , mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt conveyor, Herber, approx. 3.63m long – used - Price ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos45 Manufacturer: Herber Type: GF-210-NB-500 MA Year of Make: 2010 Length: approx. 3.63m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

Belt conveyor, Herber, approx. 4.10m long – used - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos46 Manufacturer: Herber Type: GF-210-NB- 500 MA.bl Year of Make: 2010 Length: approx. 4.10m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony