h k used for sale

Key data: 176 KW, 220 kVA, 230 V

Generator Set Specifications: Model No.: EQ-H22060 Emergency power output: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP054CC Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250SI10AI Generator dimensions (closed): Length: 3300 mm Width: 1220 mm Height: 2000 mm Weight open: 2250 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250SI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed in the chassis Silencer in industrial d ...

Key data: 222 KW, 277 kVA, 230 V

Generator Set Specifications: Model: EQ-H277222 Standby Rating: 277 kVA / 222 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Brand: Hyundai Engine Model: DP086CC Aspiration: Turbocharged & Aftercooler Fuel System: Inline Governor Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250SI20AI Generator Set Dimensions (Closed): Length: 3500 mm Width: 1250 mm Height: 2100 mm Weight Open: 2600 kg Standard Features: 4 Stroke, 1500 RPM, water cooled heavy duty diesel engine WEG Alternator (Model: AG10-250SI20AI) ABB Circuit Breaker Protection system on Manual run Flexible oil pipes and oil draining valve Pre-heater Lubrication oil and anti-freeze Batteries and cables Electrostatic paint coated, steel, welded chassis Fuel tank housed in the chassis Industrial type silenc ...

Key data: 244 KW, 305 kVA, 230 V

30 months warranty Can be fitted with a Stamford/Leroy Somer/WEG alternator Can be equipped with a ComAp/DEIF/DSE controller Set Specifications: Model No.: EQ-H305 Primary power: 305 kVA / 244 kW Emergency power output: 335 kVA / 268 kW Voltage: 230V/400V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP086CE Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Generator dimensions (closed): Length: 1300 mm Width: 3800 mm Height: 1850 mm Weight open: 2755 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tan ...

Key data: 268 KW, 335 kVA, 230 V

Produced in the EU 30 months warranty Generator Set Specifications: Model: EQ-H335268 Emergency power output: 335 kVA / 268 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP086CE Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250MI10AI Generator dimensions (closed): Length: 3800 mm Width: 1300 mm Height: 2200 mm Weight open: 2950 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250MI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed ...

; Gross weight [kg]: 2035; Engine: Hyundai P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090

; Gross weight [kg]: 2364; Engine: Hyundai P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

see performance data on photo with data

High-pressure pumps are used to clean plants and apparatus, allowing containers, filter cloths from filter presses and pipelines to be cleaned. Name: High Pressure Pump Used Manufacturer: Uraca Type: KD613 Year of construction: 1991 Material: Normal steel Drive motor: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liters / min. Condition: Used Tech. Documentation: Yes Price: On request

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

KRONES KFS 3 HMI Control Panel Price: 1500 EUR net Condition: used

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

Saccharification plant (1), consisting of: VA cooker KLÖCKNER HANSEL, year of construction 1992, 2 mixing tanks, 1 belt dryer STELA approx. 1,500x300x500 cm, 3 gas burner ECLIPSE, with extraction system, 1 VA conveyor belt for material feeder, 1 screening system BRABENDE, year of construction 1995, 1 mixer approx. 200x50x50 cm

; Gross weight [kg]: 5500; Engine: Hyundai DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 900

; Gross weight [kg]: 5650; Engine: Hyundai DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1130

The Kärcher HDS 895 is a powerful, heatable hot water high-pressure cleaner (steam jet) of the professional class. Technical Highlights & Performance Operation: The device runs via a 400V three-phase connection. Temperature: It reaches temperatures of up to approx. 98°C in hot water mode and has a special steam stage that can deliver up to 155°C. Pressure & Flow: Depending on the model variant (e.g. S, SX or Super), it delivers a working pressure of around 30 to 180 bar at a flow rate of approx. 400 to 1000 l/h. Special feature: In the steam stage (above 98°C), the pressure must be limited to a maximum of 32 bar for safety, for which a special steam wand is often required.

; Gross weight [kg]: 114; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

; Gross weight [kg]: 125; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

; Power [PS]: 61; Gross weight [kg]: 4000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x125kW - DC socket: 1x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x125kW; Water Tank Volume [l]: 300

; Power [PS]: 61; Gross weight [kg]: 7500; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x375kW - DC socket:2x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x375kW; Water Tank Volume [l]: 650

; Power [PS]: 136; Gross weight [kg]: 13000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x500kW - DC socket: 3x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x500kW; Water Tank Volume [l]: 800

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...

Honda Emergency Power Generator 8 kVA - NEW with E-start, AVR ESC, 45 litre tank - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - - - - - Generator - Manufacturer: NSM, Italy - Power: 7.7 / 8 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - - - - - Start System - Electric starter via ignition lock - Start by cable pull also possible - - - - - Facilities - Large 45 liter tank - AVR regulator (for exact voltage compliance) - Electric start - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optionally orderable) - Wheelset + push rods - Service kit for initial maintenance - 2.5 mtr. Flexible exhaust hose - - - - - Other data: - Dimensions: 79 x 58 x 65 cm - Weight: 99 kg - Consumption: approx. 2.0 ltr. (50%) / 2.7 ltr. (75%) - - - - - Shipping: - Germany-wi ...

HONDA generator set 9 kVA - NEW Soundproofed - Stage V emission standard - - - - - Engine: - Honda - Model: GX390 - 1 cylinder - Gasoline - Air-cooled - Displacement: 389 cc - - - - - Generator: - Manufacturer: NSM (Italy) - 7.7 / 8.5 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - AVR regulator - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 400V 16A socket - 2x 230V socket - - - - - Equipment: - AVR voltage regulator (so sensitive devices can also be operated) - Electric start - Oil pressure sensor - Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - Stage V emission standard: The device can therefore also be used for mobile application ...

Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...

Width 82 cm Year of construction 2014 Fully Automatic Paper Folding Machine Computer control with touch screen PFX pallet feeder for shingled sheet infeed Automation Kit Feeder Upstream knife shaft 6 fold pockets in the parallel fold section Downstream knife shaft Lift Kit Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Window rebate bag pneumatic Control unit ACC 2.4 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Automation Kit II Automated folding rollers and knife shafts Servo Folding Blades Palamides delta 703 Bundling Machine

Net price: 7.500,- € gross price: €8,925 - - - - - Yanmar emergency generator set 9 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 8.3 / 8.9 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 150 x 75 cm - Weight: 470 kg - Tank volume: 22 liters - Sound level: approx. 59 dB (7m) - Fuel consumption: 2.2 l/h (75%) - Case color may ...

price outside EU: 8.350,- € gross price: €9,936.50 - - - - - Yanmar emergency generator set 13 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.2 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m) - Consumption: 1.8 l/h (50%) / 2.3 l/h ...

price outside EU: 8.850,- € gross price: €10,531.50 - - - - - Yanmar Emergency Power Unit 13 kVA - Stage V + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.7 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Emission standard: Stage V - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m)  ...

price outside EU: 9.600,- € gross price: €11,424 - - - - - Yanmar emergency generator set 18 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 17.2 / 18.4 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 770 kg - Tank volume: 100 liters - Sound level: approx. 61 dB (7m) - Fuel consumption: 2.4 l/h (50%) / 3.1 ...

Net price: 10.000,- € gross price: €11,424 - - - - - Yanmar emergency generator set 18 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 800 kg - Tank volume: 100 liters - Sound level: approx. 59 dB (7m) - Consumption: 2.7 l/h (50%) / 3.5 l/h (75%) - C ...

Net price: 11.500,- € gross price: €13,685 - - - - - Yanmar emergency generator set 35 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 34 / 37 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 910 kg - Tank volume: 100 liters - Sound level: approx. 64 dB (7m) - Consumption: 4.0 l/h (50%) / 5.3 l/h (75%) - C ...

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

Horizontal Käde packaging machine

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009