h k used for sale

liter capacity: 90 l/min tank contens: 100 l voltage: 220 / 380 V tank dimensions ca.: 800 x 380 x 400 mm height with motor ca.: 900 mm power capacity: 2,2 kW weight: 57 kg Condition: unchecked: Base: 820 x 390 x 650 mm The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: with 2 prisms, for marking plate, clamping plate, straightening bench ... -Prism width: 8/15 mm -Dimensions: see photo technical drawing -Dimensions: 152/40/H25 mm -Weight: 1.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 29 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 51 mm -Dimensions: see photo technical drawing -Dimensions: 60/44/H50 mm -Weight: 0,8 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 22 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 100/25/H21 mm -Weight: 0.3 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 30 mm / 70° -Dimensions: see photo technical drawing -Dimensions: 150/48/H37 mm -Weight: 1.7 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.5 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 11 m/min -Conveyor belt: 1375 x 400 mm -Drive: North 0.55 kW -Total dimensions: 1640/1060/H260 mm -Weight: 168 kg

Edge Press Hess Type mobil 3000 Machine No. M 2 2791 1538 Year of manufacture 1991 Working length 3000 mm Pneumatic Banding width 60 mm Pressure range 0 – 8 bar 6 press cylinders, pressure plate 120 mm diameter Mobile on castors Heavy version Heating element 0 – 200 °C Solid edge preheating device Length 3200 mm x width 850 mm Weight approx. 450 kg

clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm -Guide rail: with rack -Dimensions: see photos / technical drawing -Dimensions: 3300/285/H185 mm -Weight: 397 kg

We have a HURCO CNC milling machine from 2008 to offer: HURCO VMX 64T Travel: X1625 Y860 Z760 Speed max. 8000 rpm (limited by the new bearings after spindle replacement) Sporadic clamping of the interchangeable arm

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Perske, Quill machining unit -Drive: 1.5 kW -Speed: 2800 rpm -Stroke: 55 mm -Dimensions: 720/200/H175 mm -Weight: 38 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm -Weight: 168 kg

servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR -Type: RH-8-3006-T-SP -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg

x-travel: 1000 mm y-travel: 1100 mm z-travel: 750 mm total power requirement: 71 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B 9000 -Art.No.: 295 434 GK -Shaft: Ø 6 x 11 mm -Dimensions: 170/150/H60 mm -Weight: 0.4 kg

Key data: 45 °, 2800 mm, 1000 mm

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

PTO gearbox, hydraulic pump gearbox, gearbox, spur gear, transmission gearbox -PTO gearbox: hydraulic pump gearbox with incoming profile shaft -PTO input: 1-3/8 6 teeth -Splined shaft output: 35x31 Z-18 -Shaft spacing: 204 mm -Bolt circle: Ø 155 mm / M12 -Dimensions: 350/205/H220 mm -Weight: 13.2 kg

coolant capacity: 10 m3l/h Headroom: 10 m operating pressure: 2 bar voltage: 420 V / 50 Hz motor speed: 1430 U/min engine output: 0,25 kW weight: 10 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers, cable shears, cable cutter -cable cutters: Split wedge Separating wedge, hydraulic -Intermediate dimension: 95 mm -Wedge length: 100 mm -Number: 3x wedge tools available -Price: per piece -Dimensions: 550/100/H175 mm -Weight: 13.5 kg/piece

splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 65 mm -Insertion depth: 40 mm -Dimensions: 565/154/H105 mm -Weight: 20.1 kg

splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Fat Baking Machine Fat Baking Station Habersang Primus 3/60 Norma Immersion basket for max. 60 pieces Turning device, removal device manual 1 proofing trolley with 10 ALU tipping troughs Temperature controller with safety thermostat Adjustable up to 50 °C Steam lid, drainer tray Output approx. 600 pieces/hour Stainless steel version, mobile Connection 400V, 9 kW, 32A-CEE plug Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device cleaned and tested with 6 months warranty We have more fat baking equipment in stock!

Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t

This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.

linear drive, linear gear, lifting gear, spindle drive -Linear drive: heavy duty, from an edge banding machine -Shaft: Ø 100 mm -Stroke: 116 mm / 6 mm/rev. -Quantity: 4 pieces available -Price:per piece -Dimensions: 775/180/H325 mm -Weight: 72 kg/piece

- CP 2000 (incl. ink remote control) - Preset Feeder - ALCOLOR dampening units - Technotrans Combi cooling device (water cooled) - ink temerature control - HEIDELBERG Autoplate - Standard Wash-up systems - GRAPHIX Alphatronic 200 - high pile delivery - Perfecting 2/0 or 1/1 - machine raised by 30 cm

Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Glass Slices Cutting Table Used HEGLA VSG A 37 Year: 1997 Total dimensions: approx. 11.5 x 4.4 x 2.5 m Hydraulically tiltable loading table with air cushion and conveyor belt The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Clamping surface: 405 x 300 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: 405/300/H200 mm -Weight: 49 kg