h k used for sale

Hinge, door hinge, folding hinge, angle profile -Angle profile: Material: Aluminum, 45 pieces -Dimensions/recess: see photos / technical drawing -Price/Fee: complete Dimensions: 70/60/H35 mm -Weight: 0.05 kg/pc.

Key data: 890 mm, 4000 mm, 5 1/min

CNC Turning/Milling Centre Control Siemens SIN 880T Centre Distance 4,000 mm Max. Swing over Bed Ø 890 mm Max. Swing over Crossslide Ø 820 mm Spindle Bore Ø 122 mm Spindle Nose DIN 55026/15 R.P.M. 5 – 1800 R.P.M. milling spindle 0,5 – 5000 Rapid Feed 15m/min Main Motor KW 50/69 Volts 400 Cycles 50 Tailstock Travel 3,708 mm Quill Travel 140 mm Including: Programmable tailstock Programmable steady ATC 95 Coolant Chip Conveyer

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: clamping iron -Bore: Ø 17 mm -Groove width: 28 mm -Dimensions: 109/82/H113 mm -Weight: 1.1 kg

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

Inv. Num. : 7917 Type: VF-2SS Producer: HAAS Created: 2015 Parameters: Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Spindle drive power: 22.4 kW Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Clamping tool: clamping iron -Bore: Ø 18 mm -Dimensions: 106/53/H111 mm -Weight: 1.7 kg

Long belt sanding machine Höfer Long belt sander Höfer approx. 1000 x 2500 mm Machine is FUNCTIONAL and ready for demonstration from PENSION/Handicraft business From the carpentry site, as seen NET € 1,500.00

clamping rail, guide rail, support rail, stop rail -Mounting rail: with T-slot -Length: 1200 mm -Groove width: 15 mm, dimensions see photo technical drawing -Dimensions: 1200/80/H30 mm -Weight: 18.4 kg

measuring probe, measuring sensor, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head -Manufacturer: Heidenhain, digital measuring probe -Type: MT 60 -Measuring length: 60 mm -Case dimensions: 285/135/H65 mm -Weight: 1.2 kg

Hubert Cloix PC60FA Pastocooker Serial: 1053 2012, Stainless, 60L Pastocooker, with agitation and scrape surface, refrigerated air cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph

Hubert Cloix PC120FA Pastocooker Serial: 1464 2012, Stainless, 120L Pastocooker, with agitation and scrape surface, water cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph

-Sourdough Fast Fermenter -Model: BRSSF100 -Mobile on castors -completely in stainless steel -400 volts -1.5 kW -Year of construction 2012 -External dimensions approx.: 64x70x125cm WxDxH

Te koop E&H Promag 53 H DN 80 Order number 3.001 + 3.002 + 3.003 Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

locking hook, guy hook, cabinet hook, locking hook, locking bracket, folding bracket lock -Locking bracket: Folding bracket unused -Number: 23x hangers available -Price: per piece / minimum order 8 pieces -Dimensions when folded: 86/35/H10 mm -Weight: 0.1 kg/piece

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 20 mm, length 470 mm -Hole spacing: 555 mm / Ø 20 mm -Delivery/Price: complete -Dimensions: 600/60/H50 mm -Weight 4.2 kg/piece

5 colors flexo central cylinder machine + 1 rotogravure printing machine. Year 1982 but overtaken 1999 Material foil = 20 my – 150 my, paper up to 120 g/m2 Max web width = 1135 mm, Repeat = 300 -800 mm, Diameter unwinder = 1000 mm, (sleeve 76 mm) turnstile. Diameter rewinder = 1000 mm, (sleeve 76 mm) turnstile. Speed 200m/min Tooth pitch 5mm, Accessories: Orbit Observation Track Control = Futec, Oil cylinder system, Printing cylinder = 67 thou x 127 – 112 thou x 22, Air expansion shafts = 7, 7 pneumatic pumps 

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 14 mm, length 380 mm -Hole spacing: 470 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 500/55/H72 mm -Weight 3.1 kg/piece

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 17 mm, length 400 mm -Hole spacing: 540 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 590/60/H83 mm -Weight 4.8 kg/piece

E&H Promag 53 H DN 65 Voor meer informatie zie foto's Order number 3.004 Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

Te koop E&H Promag 53 H DN 80 Order number 3.005 Voor meer informatie zie foto's Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

Te koop E&H Promag 30A / 33A DN 04 Order number 3.007 Voor verdere informatie zie foto's Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

Motor clamping rails, motor clamping system, for electric motors, geared motors -Motor tension rail: 2 pieces -Groove width: 17 mm, length 400 mm -Hole spacing: 580 mm / Ø 15 mm -Sale/Price: complete -Dimensions: 630/68/H85 mm -Weight 12.4 kg

E&H Promass I DN 08 Order number 3.008 + 3.009 + 3..0010 Voor verdere beschrijving zie foto's Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

E&H Promass F DN 15 Order number 3.0011 Voor meer informatie zie foto's Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

E&H Promass A DN 1/2 " Order number 3.0012 Voormeer informatie zie foto's Voor verdere vragen BEL +31620758459 Email wh.derikxgmail.com Voor buitenlandse verzending prijs op vragen

balancing valve, shut-off valve, ball shut-off valve, ball valve, ball cock, pressure relief valve, shut-off valve -Shut-off valve: unfortunately without type designation -Dimensions: see photos -Price/Delivery: complete -Dimensions: 135/70/H35 mm -Weight: 0.5 kg/piece

linear drive, linear gear, lifting gear, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, short-stroke linear slide -Manufacturer: Linear drive short-stroke linear slide -Type: 3 842 233 500 -Stroke: 35 mm -Dimensions: 180/60/H35 mm -Weight: 0.8 kg

rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 170/90/H200 mm -Weight: 10.2 kg

steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm -Art.No.: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

Vernier caliper, caliper, vernier caliper -Manufacturer: Helios, caliper gauge with fine adjustment -Measuring range: 0-500 mm -Vernier: 0.05 mm -Dimensions: 655/230/H15 mm -Weight: 1.1 kg

4-column punching tool, separating tool, punching tool, punch, punching die, punching stamp -Punching tool: 4 column punching tool long hole 10 x 7.5 mm -Punching dimensions: see photo with dimensions -Dimensions: 800/315/H320 mm -Weight: 120 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns, Ø 10/14/10 mm -Punching dimensions: see photo with dimensions -Dimensions: 265/105/H150 mm -Weight: 11.7 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg

Year of construction unknown suitable for GTO 52 2 numbering machines, 7 digits, counting forward Perforating device vertical Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Max. size= 52 x 36 cm, Availability= 062024, Eyelet machine with foot pedal LOT Loaded in truck or container

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 85 mm / 90° / 2 holes Ø 18 mm -Dimensions: see photo technical drawing -Dimensions: 300/102/H81 mm -Weight: 8.7 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg

Machine Type: Pulse Arc Inverter Welding Machine Make MERKLE Type HighPULSE 452 DW Plant No.: 93.828 Connection voltage 3 x 400 volts Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 26 Fuse 32 Amps Dimensions L x W x H 1,100 x 490 x 1,000 mm Weight 140 kg Age 10 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer with 2 pressure gauges 1 piece spare parts box complete Equipped 18 months w ...

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 240 mm / 120° / 3 holes Ø 7 mm -Dimensions: see photo technical drawing -Dimensions: 225/257/H90 mm -Weight: 25.4 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm Control: Heidenhain : total power requirement: 16 kW dimensions of the machine ca.: 5 x 4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

Reference Num.: 4116 Brand: Heidelberg Type: GTO 52 Construction year: 1991 Impressions: 20 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 1 Machine size: Length: 1,350 mm, Width: 1,400 mm, Height: 1,550 mm Total weight: kg 1,370 / lbs 3,020 Power: KW 2 / hp 2 Equipment: - konventionelles Feuchtwerk - Plus-Version: vorbereitet für Nummerier- & Perforiereinrichtung

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T slot, solid design -Material: steel -Groove width: 14 mm -Slot nuts: 10 mm, dimensions see photo technical drawing -Dimensions: 155/110/H90 mm -Weight: 9.3 kg