h k used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50/60 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 3x motors available -Price: per piece -Dimensions: 255/155/H155 mm -Weight: 8 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Light mark projector for flame cutting machines with drawing scanning -Type: 1.4 -Power: 24 V/100 W -f: 110 mm -Price: per piece -Number: 2x available -Dimensions: 230/93/H125 mm -Weight: 0.8 kg

Pallet wrapper, stretch machine for pallets, second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust device! Type HAD 1500 Completely overhauled by the manufacturer Equipment of the machine: Electrical control system completely overhauled (frequency converter) Foil brake (magnetic particle brake newly powder-powdered) adjustable Foil carriage restored Photocell for pallet height scanning Manual Functions Turntable remounted Drive-on ramp used Additional design: with wheelchair access (can be moved with forklift) Condition: very good Available: now Location: 91177 Thalmässing

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 2x motors available -Price: per piece -Dimensions: 250/160/H150 mm -Weight: 6.5 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 59 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 335/175/H160 mm -Weight: 11.6 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 137 rpm -Power: 0.37 kW -Design: Angle hollow shaft -Shaft diameter: Ø 19 mm -Protection rating: IP54 -Dimensions: 290/140/H200 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 330/160/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 1.5 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 530/230/H210 mm -Weight: 35 kg

Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg

Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg

Used vacuum filler HANDTMANN, type: VF 628 with lifting device -partially overhauled- - for filling, portioning and twisting meat or dough products - Microcomputer controller PCK-4 - New colour display - Funnel divisible - with lifting device - Filling capacity: up to 6,000 kg/h - Maximum filling pressure: up to 72 bar General overhaul - New conveyor curve - new sprocket - Lifting device remounted - new chain - all bearings new The machine is in very good condition. Viewing and test run are possible by arrangement.

Reference Num.: 4103 Brand: Heidelberg Type: SM 102-2-P Construction year: 1998 Impressions: 477 mio Size: 720 x 1,020 mm Available: directly Status: Not in production Location: Malaysia Sheet size: min 280 x 420 mm, max 720 x 1,020 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 41.14 mm Machine size: Length: 6,680 mm, Width: 3,160 mm, Height: 2,170 mm Total weight: kg 16,900 / lbs 37,258 Equipment: - CPTronic - WEKO Puderapparat T66

T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg

Clamping plate with T slots, plate field, welding table, welding table -Clamping surface width: 250 mm -Clamping surface length: 250 mm -Height: 40 mm -Plate thickness: 60 mm -Hole spacing: 290 mm -Groove width: mm -Dimensions: 330/260/H40 mm -Weight: 11.6 kg

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30

Milling machining center CNC Hedelius Tiltenta T7-4200

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm -Drawer heights: 260 mm -Weight: 216 kg

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension, telescopic slides, extension rails -1 set right and left -Extendable: up to 2850 mm -Price: complete -Dimensions: 1500/15/H75 mm -Weight: 15 kg

2 x Bock compressor in very good condition. Please refer to the type debt for data

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch -other crane ropes are also available Price: per roll -Quantity: 2 rolls available -Weight: 10.5 kg/piece

Ball bearings, deep groove ball bearings -Number: 80x stock available -Price: per piece -Interior diameter: Ø 10 mm -Outer diameter: Ø 28 mm -Width: 8 mm -Weight: 0.2 kg/piece

Fan AL60x25NGHH for offset printing machine Heidelberg SM74 (new version) replaces M4.115.2401 Art.: PS6091 / L815 Ersatzteil Nr. / parts No. M5.115.2415 (M5.115.2401/04) (M4.115.2401)

Out-of-the-box recovery connections can be created with the HPE 1950 Switch Series using the Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards. Key connections are distributed across multiple units in a logical stack for greater resiliency. Sold as a complete package with the following components: 1x HPE Office Connect 1950 JG961A 24-Port (PoE) 2x HPE Office Connect 1950 JG962A 48 port (no PoE) 13x HPE Office Connect 1950 JG963A 48-port (PoE) 10x HP A-RPS1600 JG136A Power Supply

Dmg DMU 125P Hidyn Machining Center ::SPECIFICATIONS::: CNC Model: Heidenhain Tool holder: SK 40 Spindle speed: 20000 Number of tools: 60 X-axis stroke: 1250mm Y-axis travel: 880mm Z-axis stroke: 800mm Rotary Table: Yes Rotary Table Type: Continuous Table size: 1250 x 1000mm Allowable load on the table: 1500Kg Fourth and fifth axis head: yes Fourth and fifth axis head type: continuous High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Weight: 18500Kg

Year of construction: 1991 with double head 70 mm stitch Clamping force: 18 kN Machine is in good condition, and has few operating hours

HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 34 m -for electric cable winch -other crane ropes are also available -Weight: 36 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg

Hohner Orion 4 wire stitching machine; cleaned and tested; 3 stitching heads 70/20 with coarse tool; Max. Staple thickness 20mm; Clamp spacing 70-550mm; Table size 1000x330mm. Wire stitcher Hohner Orion 4; cleaned and checked; three stitching heads 70/20 with tool rough; max.thikness 20mm; distance between heads 70-550mm; table size 1000x330mm.

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1825 mm table width: 660 mm stroke height: 750 mm : 20 mm weight max. in kg: 450 kg weight of the machine ca.: 130 Kg : 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 , 450 , 450

Machine-Details Stock-No. 1105-04008 Type of machine Machining Center - Universal Make MIKRON AGIE CHARMILLES Type HPM 450 U - 5 Axis Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Switzerland Delivery time to be agreed Freight basis ex site Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control iTNC 530 Heidenhain Turning Speed Range - Main Spindle 20000 min/-1 power capacity - main spindel 30 kW max. Torque 91 Nm tool taper HSK A63 numbers of pallets 7 Size of pallet 350 x 350 mm max. pallet load 150 kg Swivellable B: -120 / +45° Rotatable C: 360° number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 200 mm Change time ca. 3.0 sec max. tool weight 6 kg max. total weight 80 kg Rapid traverse 15 m/min Feed speeds max. 22,000 mm/min rapid traverse B: 50 min/-1 ...

Telescopic spring spindle guard CNC PLC -Type: TF 050-2100-120 V/H -Length: 2100 mm -Diameter: Ø 120 mm -Weight: 4.5 kg

Stock number: 3885 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 14187, Year of manufacture: 2000 Specifications: Table size 1000 x 560 mm Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10,000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 430 Fabr. Operating hours spindle 9318 hours Accessories: Chip conveying. Touch Probe Renishaw Cooling by spindle Spindle Cooling Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg

Pressure transducer -Type: PMP131-A3101A1X -U: 12...30 VDC -Weight 0.5 kg

Toggle bolt, anchor hook -Type: EKD-HM4 -Quantity per package: 50 pieces -M4 threaded rod Price: per package -Number of packages: 12 -Weight: 1.2 kg/package