130,453 used machines on RESALE, but how to find them? Machine Search
x-travel: 650 mm y-travel: 560 mm z-travel: 650 mm table surface area: 400 x 400 mm control: Fanuc 18i-M spindle turning speed range: 120-12000 U/min : ja/yes hand wheel type of pallet-changer: 2 Cooling through the spindle: 10 bar chip conveyor: ja/yes feed: 670 mm/min distance work spindle /surface of the table: 800 mm table load: 400 kg toolpiece magazine: chain magazine: 60 BT 40 b-axis: 360 1° rapid traverse:: 40 m/min feed: 1-40.000 mm/min tool changing time: 1,3 sec tool/tool tool changing time: 3,8 sec chip/chip total power requirement: 22,4 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.
pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.
Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.
100 ton x 3000mm 3i Graphic control 8 Axis With tooling
HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg
Product number: 2751J Type: B3/4 Serial number: HT 25929 Year of construction: 2014 Refrigerant: R404A Compressor: Danfoss Optyma Power: 3 x 400V, 50Hz, 3.9kW Dimensions: 800 x 1200 x 1500 mm
Tool pressetter Needs new computer and software Estimated price 2022 from producer € 4500,--
Used Helpman LEX 26-E evaporator on Freon with electric defrost. Complete with 3 ATB RFT0,25/4-7 fan - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 14.000 m³/h. Brand: Helpman Type: LEX 26-E kW: 22,8 Refrigerant: Freon Number of Fans: 3 Fin Space in mm: 7 Defrosting: Electric m³/h: 14.000 Sizes: 2650x740x670 mm (LxWxH) Volume: 30,9 dm³ Weight: 159 kg Amount in stock: 6
Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump -Grease lubrication pump: hand-operated, made from Stankoimport 3218 guillotine shears -Dimensions: 725/200 / H310 mm -Weight: 11 kg
Safeline Twin head metal detector Serial: 115464 Stainless twin lane metal detector, ferrous in foil head, belt dimensions 2100mm x 100mm, aperture 150mm x 160mm, with pneumatic blow reject into reject bin, bin full sensors, 3Ph
Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate
Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke travel: 150 mm -Piston rod: Ø 25 mm -Dimensions: 440/75/H75 mm -Weight: 5 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke: 250 mm -Piston rod: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 545/75/H75 mm -Total weight: 5.8 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -ORIGA: PA60210-0050 -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 54 x 230 mm -Weight: 1.05 kg/piece
Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -ORIGA: PA61120-0050 -Stroke: 50 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 69 x 265 mm -Weight: 1.85 kg/piece
Grinding and polishing machine for the shoemaker's profession, cleaned and tested.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA59220-0125 -Stroke: 125 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 290/55/H55 mm -Weight: 1.25 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 230/65/65 mm -Weight: 1.35 kg/piece
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 160 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 2.7 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg
x-travel: 530 mm y-travel: 600 mm z-travel: 300 mm 0: 7 bar Air consumption: 70-90 Nl/min. voltage: 120/230V+-5% kVA total power requirement: 1,5 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Top perforating machine with foot operation, 60 cm working width
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 80 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 245/52/52 mm -Weight: 0.95 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 80 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Dimension: Ø 45 x 260 mm -Weight: 0.95 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 80 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 144/80/H80 mm -Weight: 1.65 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece
Case rounding machine Make Schmedt Model Prärund HHS17-45 Year 1997 Size 450 mm working width and spine width up to 100 mm Available direct
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 300 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 465/53/H53 mm -Weight: 1.75 kg
- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping
Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s Height: 1900 mm Width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Design data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Type: Cast resin Upper voltage: 10 kV Low voltage: 400-230 V Circuit: Dyn5 Year of construction: 2010 Weight: 1.8 t The depressurization of the switchgear is carried out via a pressure relief chamber in the lower area of the control panel Data: Inspection r ...
Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston rod: Ø 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 240/55/H55 mm -Weight: 1.05 kg/piece
Diaphragm regulator for regulating valves -Differential pressure controlled membrane regulator: 0.1 - 0.3 bar -suitable for: Kombi 3 Plus -Return: DN10 - DN40 -Number: 12x available -Price: per piece -Weight: 0.5 kg
Clamping angle, clamping aid -Clamping angle for: workpiece clamping -Dimensions: 705/605/H710 mm -Wall thickness: 45 mm -Weight: 303 kg
Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.
Inv. Num. : 4427 Type: WMX 60i Producer: HURCO Created: 2017 Parameters: Control system: WINMAX Switch-on hours: 5648 h Operating hours: 1554 h Working table length: 1 680 mm Working table width: 660 mm Maximum table load (uniform): 1 360 kg Spindle drive power: 18 kW Maximum vertical spindle speed: 12 000 1/min X-axis travel: 1560 mm Y-axis travel: 660 mm Cone: SK40 Number of all tools: 30 pieces Maximum tool length: 300 mm Maximum tool weight: 15 kg Machine weight: 9 000 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg
Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Pneumatic cylinder -Stroke: 310 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Number: 5x cylinders available -Price: per piece -Dimensions 66/66/515 mm -Weight: 2.8 kg
Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.
turning diameter: 300 mm turning length: 300 mm control: Sinumerik 810D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibu ...
Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders - Stroke: 200 mm - Piston rod: O 20 mm -Dimensions: 265/108 / H112 mm mm -Weight: 4.3 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Piston rod: Ø 20 mm -Stroke: 200 mm -Dimensions: 75/75/H500 mm -Weight: 3.9 kg
Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Stroke: 160 mm -Dimensions: 95/95/H515 mm -Weight: 4.5 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: RM/8080 R -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. Pressure: 16 bar -Stroke: 100 mm -Price: per piece -Number: 4 pieces -Dimensions: 92/92/H320 mm -Weight: 3.45 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Piston: Ø approx. 100 mm -Piston rod: Ø 22 mm -Stroke: about 138 mm -Dimensions: Ø 138 x 390 mm -Weight: 8.25 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 465 mm -Piston rod: Ø 25 mm -Dimensions: 235/160/H705 mm -Weight: 28 kg
maximum number of results exceeded
please refine your search
