h ernault somua used for sale

0: 680 x 450 x 430 mm operating pressure: 3 - 6 bar Air consumption: 250 l/min. weight of the machine ca.: 28 Kg : 0,76 x 0,5 x ,75 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID-Nr. 1-056-11-0400

Loading caterpillar Hanomag D 600 functional, top engine

saw blade diameter: 70 - 230 mm sawblade width: 12 mm hole of sawblade: 10 - 50 mm grinding wheel diameter: 120 mm grinding wheel width: 6 mm grinding wheel hole diameter: 32 mm no. of teeth: 30 - 400 total power requirement: 0,33 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,70 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 135 mm thread dia.: M 20 mm spindle turning speed range: 72 - 2600 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MT 3 table surface area: 370 x 360 mm Distance spindle/table max.: 850 mm distance spindle/base plate: 1400 mm voltage: 400 V / 50 Hz total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 0,7 x 2,3 m • with cooling device • threading attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 1,5 mm distance between columns: 2050 mm Daylight opening: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2,7 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 mm work table:: 170x125 / 265x150 mm total power requirement: 0,5 kW weight of the machine ca.: 26 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 3100 mm Working width: ca. 3400 mm Working height: 750 - 1000 mm Haberkorn return means for Umfälzautomat For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts  ...

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm LÖWER BeamSander HBS 402 -------------------------------- Single-sided belt sander for sanding beams, Glued beams and other bar-shaped workpieces Wood with two sanding units from above. - constant working height enables the use of Roller conveyors in front of and behind the machine - heavy version with cast table - Conveyor belt feed with heavy pressure rollers - Calibration unit with steel roller - Fine grinding unit with fixed calibration sanding shoe - Working width 390mm - Workpiece thickness 4mm - 390mm 1. Grinding unit (calibration) - heavy steel roller with 200mm diameter - stable roller bearing - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Chip removal depending on the belt grain size up to 2mm 2. Grinding unit (fine grinding) - Calib ...

grinding wheel diameter: 300 mm no. of working stations: 2 Stück manually feed: ja 0 max. width of grinding wheel: 50 mm grinding wheel hole diameter: 25 grinding wheel speeds: 1420 U/min voltage: 400 V / 50 Hz total power requirement: 2 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 0,6 x 0,5 x 1,2 m • Work bench grinder with a disk diameter of 300 mm, • We are able to supply an under frame additionally, similar in execution as shown in the picture, additional price: EUR 210.00. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 140 mm clamping range: 140 mm clamping height: 50 mm weight: 17 kg dimensions: 500 x 290 x 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 820 mm table width: 520 mm stroke height: 730 mm weight max. in kg: 300 kg : 260 mm weight of the machine ca.: 0,065 t dimensions of the machine ca.: 1,0 x 0,6 x 0,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.