h ernault somua used for sale

Manufacturer: Handtmann Type: 34-5 Calibration gear type 34-5 Fur Handtmann VF 50, 80, 100, 200, 300 and for all from the series VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A

Type: Vemag Robot HP 15 С Hopper content: 250 L, one-piece Bushing with double screw Steplessly adjustable filling speed: 0 - 100 % Control: РС Portion weight: from 5 up to 60000 g Compatible to work with clips machine Vacuum pump: 20 m3/h Loading device for standard trolleys Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 17,0 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

Our Pfeiffer Vacuum HiPace 2300 is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Pfeiffer Vacuum HiPace 2300 wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Hydraulic excavator chain excavator crawler excavator Manufacturer: Hyundai Type: ROBEX 280 LC Built ca.1999 6 cylinder four-stroke diesel engine Engine model: Cummins 6BT 5.9 / 128 hp Chassis length approx.: 4900 mm Cab height approx.: 3000 mm Chassis width: 3400 mm extra width quarry bog chain, chain width approx.: 810 mm Weight about 30 tons. Deep Spoon Oscar Meier AG Type ASM 100 Pinion repaired from the rotary gearbox and seals of rotary entry.

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.

Carrier Doka H20 Top P The carriers are manufactured by Doka 8.415m - available lengths: 2.45m 2.65m 2.90m 3.90m € 3.85 per meter Formwork carriers as a well-used com-po nen ten for vie-le-relungs-sys-me. Formwork carriers are available as ba sis vie'ler Scha-lungs-sys-te-me and uni-ver-sell. The carefully used carriers are suitable for the years of the construction. The location is our warehouse in 5202 Neumarkt For further information or a visit I am at your disposal at any time. You can reach us at Tel.Nr: +43 664 1296830 or by e-mail: office@berger-international.at Berger Construction Equipment Ltd.

TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)