h ernault somua used for sale

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2X lateral implementation 9cm Refrigerant VK R 452 A Weight approx. 300 kg Type: HT 7020 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used ...

Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature range -70°C to + 180°C Temperature deviation over time ±0.1 to ±0.5 K Temperature deviation ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test room dimensions: Width 580 mm Depth 450 mm Height 750 mm External dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test room volume 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on site: 32 A sluggish Sound level at a distance of 1m (free field measurement) < 69dB (A) lateral feedthrough 50 cm / 125 cm Cabinet is water-cooled Refri ...

Rotary feeder, modern bottom opening station, CCS control system, 2 valve units, bottom patch with 2 colour tail end printers

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature deviation over time ± 1 K Temperature deviation spatially ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x lateral implementation 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to  ...

NC vices with 200mm jaw width

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Threaded drill M1 - M10 Motor 0, 22 + 032 kW Engine rpm 1420/ 2770 Spindle RPM 480-580 Weight 100 kg

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, with servo drive, compact monitor control, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., with linking device You are very welcome to test the machine in our facility in Koblenz, Germany

Plates for filler Handtmann VF 80 , VF 200 , VF 300P - NEW cataog number 834403 Plates for filler Handtmann VF 300 - NEW Catalog number 834401 Plates for filler Handtmann VF 611, VF 634 - NEW Catalog number 860678 Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram

Spare parts suitable for sacred V-mix, Nautamix, NAUTA -, Foeth mixer, Vrieco - cone mixer second-hand machine You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. Email: t.roechter@heiligbv

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 800 mm Surface: coate ...

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 1,000 mm Surfac ...

With cup forming station for 15 cups Cup format: 33 mm x 51 mm, height variable depending on the weight Cutting dimension 41 x 59 mm with pull tab Volumetric dosing unit with 15 measuring points for 10 to 30 grams, weight adjustable. Product hopper approx. 50 litres Performance: max. 30000 cups/h depending on the product consistency is suitable for the filling of honey, butter, jam, etc. With carton packer Hassia. Used, complete overhauled.

With tool for 6 cups. Cup sizes: round 45 mm, height variable depending on weight requirements. Die size: round 53 mm, with pull tab. Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable. Product hopper approx. 50 litres. Capacity: 9,000 cups per hour depending on the consistency of the product.

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm

Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz suction power: approx. 30 m3/h end pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Generalueberholt Performance: 12 months Zubehoer: User manual mineraloel filling Quantity: several available delivery time. ready for use

Standard Accessories

DYNAJET 500me HELI - 400V/50Hz INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth use - Oper ...

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

Cold water high-pressure cleaner with 7.5 kW output - 270 bar pressure and 15 l/min. Including Hotbox 300bar Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protect ...

Cold water high-pressure cleaner with 4 kW output - 170 bar pressure and 14 l/min. Including hotbox up to 200 bar. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink p ...

Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): -  ...

Herbert Cyclone nik 2 top labeller from 2012. The applicator head can turn 360 degrees around. Label height: 140mm Year of production: 2012 Serial number: HS 108869 Condition: good Dimensions: 950mm x 850mm & 2.100mm (LxW&H)

Round-table HAU RK 6-800, with 6 working spindles and 3 polishing units, further details and sightseeing on request; cleaned and ready for use

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

Herbert Gemini weigh price labeller from 2003. Weighing range: - Max weight: 4 kg - Min weight: 0,1 kg Weight precision: 0,002 kg Labelheight: - Applicator no 1: 150mm - Applicator no 2: 400mm Packs per minute range: - Minimum speed: 1 per minute - Maximum speed: 100 per minute Conveyor width: 225mm Year of production: 2003 Serial number: 20251005 Condition: good Dimensions: - Checkweigher: 1.600mm x 750mm & 1.750mm (LxW&H) - Labeller & printer: 1.800mm x 1.000mm & 2.100mm (LxW&H)

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

capacity up to 2..500 bph 0.5l or cans The tunnel pasteurizer is Reversible mode Control Siemens Logo Heating method Steam - Plate heat exchanger in outside of pasteurizer The manufacturer year is 2016, new (It was the model for the exhibition in Brau Beviale)

Indexing table HAU RK 6-800, 6 work piece spindles, 3 polishing units, more details and inspection on request; cleaned and in working order

Hamada H 234 C Year 1998 2-colour Size: 34 x 45 cm Speed: up to 10.000 sheet/h All books and tools BONUS: Approx. 200 new printing plates Good working condition. Visit in our stock is possible. We are pleased to make you an offer, please send us an email.

Tunnel pasteurizer „TP- HRW 10' for canned products. Product: canned pickled vegetables; Salads; Capacity: 1000 – 10 000 PACKING/H material: stainless steel.

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Attachment polishing machine HAU HR 4 for rotary parts up to max. 200 mm diameter, with 2 processing units, units equipped with overtaken sprueh guns for liquid polishing paste, disc diameter max. 400 mm, disc width max. 120 mm, shaft diameter 35 mm, machine similar illustration; overhauled, ready for use

Various new spare parts for Rösler blasting system Turbine Hurricane H42 H32 H28 Litter scoop Rösler H42 H32 H28 Impeller Rösler H42 H32 H28 Guide sleeve Rösler H42 H32 H28

Centrifugal pump, CRI5-2A-CA-I-E-HQQE, 9/14,3m, 5,8m³ Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation,  ...

Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture ; reconditioned

Centrifugal pump, CRI10-02 A-CA-I-E-HQQE, 15,3/20m, 10m³/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertikale, mehrstufige Kreiselpumpe. Die medienberührten Bauteile der Pumpe sind aus hochwertigem Edelstahl. P: 0,75 KW, H: 15,3m, Hmax: 20m, Q: 10m³/h Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will re ...

Rotary table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized lifting adjustment, liquid paste system (pistols + pressure cover), incl. control cabinet Price and further details on request.; good condition, ready for immediate use

Plate bender Heidelberg, fit\'s from size 52 up to 105, max. plate lenght 811 mm; Ready for operation

Automatic depalletizer for glass bottles Capacity: 15,000 bottles/hour for 330-500 ml User-friendly and customizable software for every requested product and every need. Minimal downtime: Our depalletizer can be quickly adapted to new products, size changes or product types. Semi-automatic "push" depalletizer for pallets with layers of glass bottles, cans or other types of containers with two-column gantry structure, mobile centering device, intermediate table and transfer trolley. On request, our machine can work fully automatically, which leads to a high production rate. The machine includes; Layer movement unit Pallet conveyors (motorized) Fuse box HMI – Keyboard and display with auto-programming functions Pneumatic system Protective grilles (metal nets) Equipment Operating status of the machine Technical Documentation The devices are compliant with and compl ...

Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request.; good condition, working order

Q = 20 L/min, Pmax = 7 bar, max temp 70 deg Celcius, Viscosity 10-700 cSt. Inlet and outlet 1 "Voltage 380V UPON REQUEST we will send movies of the unit in operation; dewatering hydraulic oil.