h ernault somua used for sale

GUSCOR HGM560 / SFGLD560 Part Number 7673532

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Was installed in a Husky injection moulding machine

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Y.O.M.: 2002 Factory No.: 02050057 Power: 500 l/h, motor: 22 kW Pressure: 1000 bar as good as new with manual Dimensions LWH: 1400 x 1000 x 1250 mm Weight: 900 kg

Wilms indoor heater new ovp Manufacturer Wilms Type B125 Diesel Oil-powered heaters with open flame, e.g. for deicing or thawing materials, vehicles, pipelines, etc. As additional heating of stables as well as of operating and storage rooms with sufficient ventilation. Electric connection: 230 V, 50 Hz. Room thermostat installed as standard. Type: B 125 Heating capacity: 40 kW - 34,400 kcal/h Air power:: 920 m3/h Consumption: 3 kg/h Tank: 38 l Weight: 24 kg

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Manufacturer: Bohrgetriebe, Stück Bohrgetriebe : 1, Number of drilling spindles: 13, Grid 32 mm: yes,

2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

The Hot Strip Mill at JFE Steel’s Keihin district stands as a testament to cutting-edge steel production technology, boasting the capability to manufacture Japan's widest hot-rolled steel strip. Commissioned in 1979, the mill has been continually upgraded throughout the years to maintain its competitive edge. Production ceased in September 2023, leaving behind a legacy of excellence. It features a Pair Cross Shift Mill for adaptive roll gap control to optimize thickness and shape. A key enhancement was the integration of a Sizing Press in 2009, which allows for variable strip widths while using slabs of constant width. This not only increases the productivity of the slab caster and reheating furnace upstream but also expands the range of products that can be manufactured efficiently. Capable of rolling slabs measuring up to 2,300 mm in width, with thicknesses ranging from 160 t ...

The scope of delivery includes: Heavy-duty anchors, HST2 Purchase quantity: 25 pcs. Manufacturer: Hilti Design: Carbon steel galvanized Approved for: cracked concrete Through-hole mounting: + push-in mounting Diameter: M12 Drill hole Ø depth: 12 x 88 mm Nominal anchoring depth: 80 mm Effective anchoring depth: 70 mm Dowel length: 105 mm Clamping thickness: 10 mm Weight per piece: 0.080 kg Weight per box: 2,480 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Te koop Endress + Hauser Flowmeter Type: Promass 83F Serial number: 79097A02000 Inclusief test certificaat Number: 1.06 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

Hydraulic Pump available for sale. Make: Hydrostar Type: SPV9M Serial Number: 2903900/R PN: 12.5 Vgn: 147.6 Nn: 1450 Made in Poland

Hagglunds MK64 11100 AO RN 0100 Hydraulic Motor available for Sale. Make: Hagglunds Type: MK64 11100 AO RN 0100 IMDIVID NO:611 46 32666/611 56 32651/611 56 32647/611 46 32650 Displecement: 11030Cm³/R Torque: 176NM/BOR Max Press:320Bar Rated Speed: 70R/Unit Max Speed:120R/Unit Max Speed Running: 600R/Unit

MAKE:MACGREGOR HAGGLUNDS ART NO:388 3127-801 SERIAL NO:1994480667 SUPPLIER:100658 DATE:9450

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HLS MACH. NO.:HLS 6690 / 6691/ 6685 DATE:Jan-77 RATED TORQUE:2300 K.G.M. 16636 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKA MACH.NO.:HKA 7942 DATE:Jan-77 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min

Safety valve Handtmann DN 32 Steam/ Gas Input DN 25 Output DN 32 Length 270 Material stainless steel 1.4307 Pressure 0.2-2.5 bar

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

We offer you here a used pallet rack traverse of the manufacturer Jung Heinrich for sale. Technical data on the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 85 x 40 mm Truss type: GN85x41 Agraffe: 5 HK (hook) clear width: 2,775 mm load per pair of trusses 1,023 kg at the same. distributed load 02x locking pins, used Version: kompl. galvanized To secure the longitudinal beams against unintentional lifting out

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

60 x 300 cm without stand

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock

Dionex P 680 LPG-4 HPLC Pump

Key data: 3 t, 150 mm

For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts