h ernault somua used for sale

rockwell hardness: . brinell hardness: . weight: kg dimensions: mm Hardness tester Rockwell measurement with underframe table all technical data without guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering and tarpaulin cover -Platform: 3990/2180/H690 mm -Load capacity: 6.5 t -Tires: Continental Super Elastic 6.00-9 solid rubber -Overall dimensions: 5700/2180/H1000 mm -Weight: 820 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: 30 liters -Hydraulic tank: with level and temperature indicator -Return filter: Hydac RF BN/HC 30 BB 10 A 1.0 -Motor mount: Ø 147 mm / bolt circle Ø 163 mm M10 -Individual components: see photos -Dimensions: 495/340/H375 mm -Weight: 13.8 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit -Hydraulic tank: Hydraulic tank for hydraulic unit -Hydraulic tank: with level and temperature indicator -Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6 -Individual components: see photos -Dimensions: 490/400/H515 mm -Weight: 25 kg.

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 60 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1 mm   integrated feed function: yes STRIP-FEEDER   sheet width max.: 400 mm   sheet  ...

Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: Spindles: 10 Spindle 1: Bottom / 7.5 kW / 50 mm Spindle 2: Right / 7.5 kW / 50 mm Spindle 3: Left / 7.5 kW / 50 mm Spindle 4: Right / 7.5 kW / 50 mm Spindle 5: Left / 7.5 kW / 50 mm Spindle 6: Top / 11 kW / 50 mm Spindle 7: Bottom / 7.5 kW / 50 mm Spindle 8: Top / 7.5 kW / 50 mm Spindle 9: Bottom / 7.5 kW / 50 mm Spindle 10: Universal / 7.5 kW / 50 mm Working width: 170 mm Working height: 120 mm Feed rate: 60 m/min Feed motor: 15 kW Table: Hard-chromed Condition: Gebraucht Location: Tauberbischofsheim, Germany

Punching force: 500 kN Stroke: 32 mm Stroke adjustable: 10 - 32 mm Stroke rate: 35 /min Normal punching device: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching device: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1400 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

: gebraucht : 2002 : 090129 : prompt, Zwischenverkauf v : Türkei : 27800 € : 1 : 3100 mm : 10 mm : 350 mm : 10 1/min : 1.5 ° : 1000 mm : 22 kW : 3800 mm : 3600 mm : 2000 mm : 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of ...

: gebraucht : 1992 : 090174 : Belgien : 17800 € : 1 : 3050 mm : 6 mm : 11 - 25 1/min : 0.5 - 3 ° : 18 : 750 mm : 11 kW : 3850 mm : 1750 mm : 1720 mm : 4600 kg : 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration ...

: gebraucht : 2015 : 090243 : prompt, Zwischenverkauf v : Türkei : 21800 € : 3100 mm : 6 mm : 4 mm : 15 1/min : 1.5 ° : 1000 mm : 15 kW : 200 l : 4110 mm : 2200 mm : 3790 mm : 2100 mm : 7300 kg MIT PNEUMATISCHER BLECHHOCHHALTEVORRICHTUNG Schwingschnittausführung NC-Vorwahlsteuerung D-Touch 7 mit Touch-Screen für Hinteranschlag, Schnittlänge, Stückzahl, USB Anschluss Motorischer Hinteranschlagbis 1.000 mm auf Kugelumlaufspindeln, hochklappbar Übersichtliches Bedienpult aufSchwenkarm montiert Hydraulische Niederhalter nahe an derSchnittkante angeordnet Fußschalter Zentrale manuelle Schnittspaltverstellung Schnittlinienbeleuchtung Breiter Auflagetisch mit Gleitkugeln Stückzähler Einzel- und Dauerhub Hochklappbarer Fingerschutz 1.000 mm 1 Seitenanschlag 1.500 mm mit Skala,T-Nut und Kippnocke 2 Blechauflagearme 1.000 mm mit T-Nut Einfaches Wechseln und Nachschleifender Messer Eins ...

Specially designed for stamping, die cutting, and forming work. Model CM-50NC Power 50 TN Motor power 5.5 KW Throat depth 265 mm Working speed 9.9 mm/s Approach speed 50 mm/s Return speed 66 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700 x 450 mm Upper table 550 x 300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg STRUCTURE AND TABLES The CM/NC series hydraulic presses consist of an electro-welded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed with finite element software. With all this, we always guarantee our high standards of precision and quality. They are equipped with an upper table and a lower table made of C45E ste ...

2 PSC. UHP units - 1 Watertank 2000 l and 1 Fuel tank 1800 l Performance: 2 x HAMMELMANN HDP 170 units with 2 x pressure steps: 1- 2900bar 29l/min 2 - 3000bar 27l/min Diesel Engine = Caterpillar 3126B ATAAC The units has always been maintained as they should. The units are running and performing as they should. Sold without any warranty.

FBF 4022 HOMOGENIZER 3,500 LITRES/HOUR Manufacturer: FBF ITALIA Model: FBF 4022 Serial no.: 17124175 Year: 2017 Industrial high-pressure homogenizer Capacity: 3,500 l/h Maximum operation pressure: 180 bar Minimum feed pressure: 2 bar Electrical specifications: 22.3 kW/400 VAC/50 Hz/42 A/3PH+PE Overall dimensions: 1,400 x 1,150 x 1,200 mm (WxLxH) Weight: 850 kg CE Marking Includes user and maintenance manual in Spanish

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm table adjustment - longitudinal: max. 660 mm table cross movement: max. 410 mm distance spindle center to table: max. 525 mm table speeds: 2 - 28 m/min table load: max. 400 kg cross feed of table intermittent: 3 - 40 mm rapid traverse cross: 1 m/min grinding wheel size: max. 300 x 50 x 76,2 mm total power requirement: 8 kW weight of the machine ca.: 2,1 t dimensions of machine L x W x H: 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor Manufacturer: Hägglunds Model No.: CA 50 32 SA0 N00 02 19 The engine is NEW and fully functional. see pictures for more details.

Haco 220 x 4 mm (fixed) Capacity : 220 x 4 mm Strokes/min: 35 Fixed angle -- variable angle: fixed: 90° Driven: hydraulic Workspace: 650 x 650 mm Work height: 890 mm Electric motor (power): 2 kW Length : 800 mm Depht : 660 mm Height: 1200 mm Weight: 550 kg

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3670 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 4330 mm Depth: 1950 mm Height: 2980 mm Weight: 17 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 150 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3750 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4700 mm Depth: 1700 mm Height: 2850 mm Weight: 11 ton

Haco ERMS 230 ton x 4300 mm CNC Capacity: 230 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 200 mm/sec Working speed: 8 mm/sec Returning speed: 125 mm/sec Electric motor (power): 19 kW Length: 4320 mm Depth: 2000 mm Height: 2800 mm Weight: 15 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 3500 mm Depth: 1700 mm Height: 2500 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 12 kW Length: 3270 mm Depth: 1500 mm Height: 2460 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton

3 assen: Y1 / Y2 / X bovenste en onderste Amada-systeemtooling Gerenoveerd door Haco in 2024 Capacity: 135 ton x 3600 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4200 mm Depth: 1700 mm Height: 2500 mm Weight: 9 ton Capacity: 135 ton Bending length: 3100 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3700 mm Electric motor (power): 15 kW Weight: 18 ton Capacity: 200 ton Bending length: 4300 mm

Heraues hot air sterilizer for killing pathogens and bacteria. The sterilizer consists of a double-walled, heat-insulated sheet metal housing, door with unlocking, heating, fan and control cabinet. Recirculated air: The circulating air fan draws in the air from the usable space via the heating and blows it back into the usable area when heated. Fresh air: With fresh air, the fan blows air into the interior of the oven. The fresh air is drawn in with the circulating air by the circulation fan and blown into the usable space via the heating.

description Heraues hot air sterilizer for killing pathogens and bacteria. The sterilizer consists of a double-walled, heat-insulated sheet metal housing, door with unlocking, heating, fan and control cabinet. Recirculated air: The circulating air fan draws in the air from the usable space via the heating and blows it back into the usable area when heated. Fresh air: With fresh air, the fan blows air into the interior of the oven. The fresh air is drawn in with the circulating air by the circulation fan and blown into the usable space via the heating.

MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...

The machine is in good technical condition; it can be tested by prior arrangement.

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-D11-R11-0000-7DM0 The engine is NEW and fully functional. see pictures for more details.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers, bale scales, straw trailers, 2-axle tandem trailers -Handover: in its current condition as inspected -Air brake: not connected -Heavy-duty transport wagon: 2-axle tandem trailer with 1-axle turntable steering -Platform: 9950/2500/H1400 mm -Load capacity: t -Tires: 11.00-20 -Overall dimensions: 12050/2500/H1400 mm -Weight: 5000 kg

1 Gebr. Hacksaw Kasto, HBS 1, built in 2002 Technical data (KASTO hbs 1) • Saw type: Hydraulic metal hacksaw (semi-automatic) • Cutting range at 90°: ◦ Round: max. 210 mm ◦ Flat (width x height): 240 x 190 mm ◦ Square: 210 x 210 mm • Cutting range at +45° mitre: ◦ Round: max. 150 mm ◦ Flat: 150 x 100 mm ◦ Square: 145 x 145 mm • Saw blade dimensions: 400 x 30 x 1.5 mm • Cutting speeds: 2 steps (16 and 32 m/min) • Motor power: approx. 0.8 kW • Material support height: 500 mm • Machine weight: approx. 170 kg • Dimensions (L x W x H): approx. 1,190 x 480 x 810 mm (lowered) or up to approx. 1,230 mm in maximum position

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-G19-A11-2A50-257EM The product is NEW and fully functional. see pictures for more details.

HP Inc. HP4200 Processing Station – MJF-Nachbearbeitung für industrielle Fertigung Technische Einordnung HP4200 Processing Station für die Nachbearbeitung von MJF-Bauteilen, Baujahr 2017. Die Maschine wurde im mittelständischen Produktionsumfeld eingesetzt und weist weniger als 1000 Druckjobs auf. Wartungsvertrag (3DaaS) war bis 2024 aktiv, was auf kontinuierliche technische Betreuung hinweist. Zustand und Einsatzhistorie Gebrauchter Zustand mit dokumentierter Nutzungshistorie. Die geringe Anzahl an Druckjobs deutet auf moderate Auslastung hin. Regelmäßige Wartung durch HP-Serviceverträge bis 2024 durchgeführt. Lieferumfang Die Processing Station wird ohne Build Units angeboten. Lieferung umfasst ausschließlich die Nachbearbeitungseinheit. Zusatzleistungen Optional verfügbar: Fachgerechte De-Installation und Verpackung durch zertifizierte HP-Techniker. Transport in Original-HP ...

sheet width: 6020 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm back stop - adjustable: max. 1000 mm work height max.: 1030 mm no. of strokes: 5 - 10 Hub/min cutting angle: 0.5 - 3.0 ° down holder: 33 Stück Control: SC 100 T engine output: 11.0 kW weight of the machine ca.: ca. 27000 kg range L-W-H: 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left Control unit with LCD display Pre-selected positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment Programmable retraction from the backgauge Programmable cutting length limitatio ...

Important note: the spindle was replaced in 2025 for approx. 40,000 EUR, therefore few spindle hours! The pallets are clamped on the rotary tilting table. Incl technical documentation and HSK-E 40 tool holders and three pallets. additional technical data: • rapid traverse: max. 30 m/min

Zware kantbank gt; 300 ton capaciteit per 1 meter gt; ideaal geschikt voor hoogwaardig gelegeerd staal 6 assen: Y1 / Y2 / X / R / Z / V De bovenste ram heeft een verlenging (hoorn) van 500 mm gt; de totale buiglengte is 4100 mm Hydraulische klemming bovenaan Conische plooien! Akas beveiligingslasersysteem CNC-bombering Uitgerust met een V-Matic variabele buigmatrijs (CNC-gestuurd); V40 tot V160 max. De machine staat op de grond; er is geen fundering nodig. Bevat een breed assortiment zwaar plooigereedschap voor hooggelegeerd staal! Gereedschap wordt opgeborgen in een verplaatsbaar rek dat aan de machine kan worden bevestigd. De operator kan vervolgens handmatig boven- en ondergereedschap in de machine plaatsen en eruit halen. Capacity: 500 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2850 mm Max stroke: 400 mm Max distance between table -- ram: 890 mm  ...

2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers – used, 20-head multihead weigher in TWIN configuration, built for frozen meat., The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval., The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product., Key features, - Twenty weigh hopper ...

Pellet mill for straw / hay / alfalfa and much more ! Plant is about 500 hours. Running . Flat die 8mm and Koller head are included '

CONTROLS   PLC PRESS DESIGN   quick die change system: yes SLIDE   total force (nominal): 630 to   stroke: 125 mm V-RING   nominal force: 320 to TOOL DIMENSIONS   lower table (left-right): 800 mm   lower table (front-back): 800 mm   shut height max.: 420 mm STRIP-FEEDER   band lubrication system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6800 mm   space requirements -front/back-: 3300 mm   total height: 3730 mm   height above floor level: 3005 mm   height under floor level: 725 mm   total weight approx.: 26000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   light barrier: yes   decoiler: yes   leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995) including belt system

CONTROLS   PLC SIEMENS SIMATIC HMI SLIDE   total force (nominal): 320 to   stroke: 200 mm COUNTER RAM   nominal force: 63 to V-RING   nominal force: 100 to TOOL DIMENSIONS   shut height max.: 360 mm DIMENSIONS / WEIGHTS   total weight approx.: 18000 kg The system was fitted with a new control unit approximately 1.5 years ago including belt system Inkl. Decoiler Schmid HR10

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 160 tons -Motor: 22 kW -Clamping table: 810 x 870 mm -Max. insertion height: 500 mm -Max. stroke: 250 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1900/1800/H4200 mm -Weight: kg

Hydraulic Pump Manufacturer: Hydromatik Model No.: A4V90EL1 . OROG101A The pump is used, but functional, see pictures. Internal number: 617 766

horizontal machining center, year 2006, CNC Fusion 640 M. Used machine. More info & price on IndustrialBuyer.

Hammelmann HDP 164 Pump Pressure: 2,400 bar Flow rate: 35 l/min Engine: Volvo Penta Different accessories available: spare parts, hoses, cables, gun, etc. Machine always maintained and monitored Maintenance invoices available Ready-to-work equipment Conjet 324 Robot – Year 2010 Comes with 2 lengths of extension arms Allows you to adapt to different jobsite configurations Machine always maintained Equipment in very good condition and ready to use

From a current recycling we offer you combine harvesters + header + cutterbar wagons. Year of manufacture 2021 (registration date 25.03.2024) + 2023 (header + cutterbar car) Condition: good / very well maintained EUR 210.000,00 VHB Hours: 722.62 Engine / 417.98 Threshing Hours Asset Manager: Monika Stüker Phone: +49 (0) 172 2796951 Mail: m.stuekerakf.de We will be happy to provide you with details upon request. Location: 77815 Bühl The sale is without warranty Subject to prior sale

Geibel & Hotz FS 1050 GT SL Surface Grinder Flat grinding grinder Specifications for the FS 1050 GTSL Assembly / Axis Parameter Value Working range grinding length (max.) 1,000 mm Grinding width (max.) 500 mm X-axis (longitudinal) longitudinal table stroke 50 – 1,050 mm Table speed 0.001 – 35 m/min (infinitely variable) Y-axis (vertical) Distance table to spindle center 180 – 625 mm (optionally up to 825 mm) Perpendicular speed 50 – 4,000 mm/min Z-axis (transverse) transverse travel (max.) 500 mm Grinding spindle Grinding wheel dimensions 400 x 100 x 127 mm (Ø x width x bore) Spindle drive (standard) approx. 11 kW Max. speed up to 2,380 rpm / 35 m/s Weight & installation Total weight of the machine approx. 4,500 kg Max. table load approx. 1,380 kg Various accessories included. If you have any questions, please contact us at Tel. 017621834834 ----- ...

Hammelmann Hochdruckpumpenanlage HDP 202 / S 1100-20, Baujahr 2019, mit nur ca. 300 Betriebsstunden. Die Anlage befindet sich in einem sehr guten Zustand, ist voll funktionsfähig und sofort verfügbar. Technische Daten: - Hersteller: Hammelmann - Typ: HDP 202 / S 1100-20 - Baujahr: 2019 - Maschinen-Nr.: B9.02202.0267 - Betriebsstunden: ca. 300 h - Max. Betriebsdruck: 3.000 bar - Förderleistung bei 3.000 bar: 28 l/min - Alternativer Betriebspunkt: 1.000 bar / 110 l/min - Antrieb: Volvo TAD 873 VE Dieselmotor - Motorleistung: 235 kW - Abgasstufe: Stage IV / Tier 4 Final - Motordrehzahl: 2.200 U/min - Pumpendrehzahl: 2.150 U/min - Max. Flüssigkeitstemperatur: 40 °C - Sauganschluss: DN100 - Ausführung im 10-Fuß-Container Die Anlage kann mit zwei unterschiedlichen Betriebspunkten betrieben werden: 1.000 bar / 110 l/min oder 3.000 bar / 28 l/min. Original Hammelmann M ...

1.) Sumbel Herold 2.)Zechini Ottima 74 Roller press Year 2000 Size 74cm Roller pressing unit to press together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max material thickness: 3,5 mm. Dimensions: 96 x 85x 105h cm Net weight: 119 kg 3.) Schmedt Präkant 6201 Turning-in machine Schmedt Präkant 0601, good condition, cleaned and checked, max.size 600x600mm, min,150x150mm, max. board thikness 6mm, min.1,5mm.

Manufacturer: HAAS Model: EC 400 4AX HE Year: 2006 Condition: Used Stock number: 9566 Maximum pallet load: 300 kg Maximum spindle speed: 12000 1/min X-axis travel: 508 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 22800 € : 1 : 3100 mm : 6 mm : 0.5 - 3.5 ° : 9.5 kW : 950 mm : 4070 mm : 2330 mm : 3400 mm : 1850 mm : 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PU ...