h ernault somua used for sale

Tafelschere LVD HST ? C 40/6 Hersteller: LVD Type: HST ? C 40/6 Baujahr: 1995 Zustand: gut, gebraucht. Hydraulik neu abgedichtet. Messer geschärft Schnittleistung in ST37 6,35 mm Maxi. Schnittlänge 4050 mm El. Hinteranschlag 1000mm El. Schnittwinkel 0,5 bis 2 ° El. Schnittspaltregelung 0,05-0,8mm Trittfrequenz 10 bis 45 Hübe / min 7,5 kW Motor Ölbehälter 150L Gewicht 9500 kg Transportmaße L x T x H ca. 5,0 x 2,2 x 2,2m Aufstellmaße L x T x H ca. 5,0 x 3,1 x 2,2m Auflagetisch mit Kugelrollen 3x Auflagearme 1,5m Skala Dokumentation

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 1000 mm   Y-axis travel: 800 mm   Z-axis travel: 1100 mm SPINDLE / HEAD   tool fixture: HSK E100 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 4 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6800 mm   space requirements -front/back-: 3000 mm   total height: 3200 mm   total weight approx.: 20000 kg

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm rotary table tiltable: 360 Grad Number of working hours: 55.000 h tool taper: HSK 63 spindle turning speed range: 20.000 U/min max. torque on the spindle: 85 table-size: 400 x 500 mm table load: 0,5 t 4-axis machine Chain-type tool magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hidroliksan Year of Manufacture: 2022 Model: HSA Type of Machine: Hydraulic Press Technical Details - Capacity: 200 Ton - Power / Motor: 30 Kw - Working Voltage: 380 Volt - Frequency: 50 Hz - Max Current: 75 Amp - Work Pressure: 225 Bar - Cylinder Diameter: 320 mm - Stroke Length: 450 mm - Pump: 103 lt/min - Oil Capacity: 750 lt - Ram Table Advance Speed: 160 mm/sn - Ram Table Return Speed: 250 mm/sn - Mold Dimensions Max: 1600 x 1400 mm - Mold Weight Max: 5000 Kg - Machine Weight: 18000 Kg - Dimensions: 3650 x 3400 x 5000 mm

Key data: 300 mm, 1130 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

HDG duplex HFFS RB-200-2 Bj 2022 For two small stand-up pouches with reclosure (zipper) per cycle. Conversion to one large pouch possible. Current format: width x height x bottom gusset 90mm x 150/170mm x 2x25mm Output: up to 180 bags per minute (realistically 150-160). Barely run; like new. Without dosage. Location: near Frankfurt

CONTROLS   PLC LAUER SLIDE   total force (nominal): 320 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s COUNTER RAM   nominal force: 63 to   stroke: 30 mm V-RING   nominal force: 100 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 650 mm DECOILER   sheet width max.: 250 mm   sheet width (min): 40 mm   coil weight max.: 1250 to   max. diameter of coil: 1300 mm LEVELLER UNIT   sheet width max.: 250 mm   sheet thickness max.: 5 mm   sheet thickness min.: 0.8 mm   number of leveller rolls: 11   feed velocity min.: 4 m/min   feed velocity max.: 12 m/min STRIP-FEEDER   feeder type: grip feeder   she ...

STUDER internal grinding spindle – 40,000 rpm with accessories High-speed spindle for internal grinding STUDER is for sale, in excellent condition and properly stored in its original wooden protection box. Key features: - Type: 102540B - Maximum speed: 40,000 rpm - Compatibility: Studer S30, S40, S31, Favorit, etc. - Application: Internal grinding - High-precision construction. - Includes wheel holders/accessories and tools shown in the photographs. - Includes documentation and instructions. - Wooden box for storage and transport. Ideal as a replacement for STUDER grinding machines, for replacing an existing spindle or for repair projects. The set is delivered with the available accessories shown in the photographs, offering a particularly interesting solution for grinding workshops that need hard-to-find STUDER original equipment. National and inter ...

Opklapbare achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Backgauge: CNC SP8 - 1000 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4050 mm Depth: 1900 mm Height: 2200 mm Weight: 10 ton

High-pressure pumps Dynajet 500 me , NEW, Operating pressure: 500 bar, Flow rate: 15 l/min, Drive: electric 15 kW, 400 volts, Operating hours: approx: 1, Trolly, incl. accessories,

Hydraulic injection moulding machine manufactured in 2008. This HAITIAN SA8000 features a clamping force of 8,000 kN and an injection volume of 5,768 cm³, making it suitable for various applications. The machine is equipped with a screw diameter of 120 mm and has undergone recent servicing, including a new nozzle filter installed in 2023. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN SA8000 machine we have for sale. Contact us for further details.

DYNAJET UHP 220 – Demonstration system Pressure: 2,800 bar / approx. 40,000 PSI Flow rate: 27 l/min Year of Make: 2021 Engine hours: approx. 633 hours High-pressure operating hours: approx. 350 hours Engine: Volvo diesel engine, 160 kW Condition: very good, ready for immediate use Included in delivery: 1 × high-pressure gun with lance, 800 mm 1 × omnidirectional nozzle including nozzle holder 1 × rotary nozzle 1 × high-pressure hose, 20 m, with quick-lock connection 1 × control cable, 30 m

Type: EC-1600ZT voor het bewerken van grote onderdelen met geïntegreerde draaitafel met 4e as Tafeldiameter: 760 mm X-axes: 1626 mm Y-axes: 1270 mm Z-axes: 1016 mm Table dimensions: 1626 x 914 mm Max weight on the table: 4536 kg Admission in spindle (ISO): BT50 Power on the spindle: 22,4 kW Control: Haas Toolstore: yes Tools: 50 positions Frequency : 7500 rpm (460Nm) Length: 3378 mm Depth: 4928 mm Height: 4674 mm Weight: 14 ton ACCESSORIES: yes

Type: EC-1600ZT voor het bewerken van grote onderdelen met geïntegreerde draaitafel met 4e as Tafeldiameter: 760 mm X-axes: 1626 mm Y-axes: 1270 mm Z-axes: 1016 mm Table dimensions: 1626 x 914 mm Max weight on the table: 4536 kg Admission in spindle (ISO): BT50 Power on the spindle: 22,4 kW Control: Haas Toolstore: yes Tools: 50 positions Frequency : 7500 rpm (460Nm) Length: 3378 mm Depth: 4928 mm Height: 4674 mm Weight: 14 ton ACCESSORIES: yes

Vacuum homogenizing system Make Haagen & Rinau Type Unimix RU IV 200 Net capacity 200lt Stirrer with scraper 1500/300 rpm 3.7/4.4 KW Homogenizer 1500/300 rpm 2.0/2.4 KW Heating by steam double jacket, max 6bar

High voltage induction motor, not used, Power 800 kW, Voltage 690 V, Current 840 A, Rotational speed 1385 rpm, Weight 7340 kg, Protection class IP 55, Cooling IC 416

WINDMÖLLER & HÖLSCHER Miraflex, 8 colors, gearless, Camera and inspection system recently renovated, Fast sleeve change, 4 motor per deck CNC position system, Computer supervision, Web width 1.050 mm., Print width 1.000 mm., Min print repeat 300 mm., Max print repeat 800 mm., Turret automatic unwinder and rewinder, Max reel diameter unwinder/rewinder 800 mm., Drying - 2 zones, 4 fans, 2 gas burners, Videocamera y.2024 with automatic quality inspection system, Corona treatment, automatic vyscosity control, Turboclean automatic washing system, closed chamber doctor blades, n.32 ceramic anilox sleeves : 10 x 400 L/cm- vol.3,5 ; 4 x 470 L/cm- vol.3,5 ; 4x 340 L/cm-vol.5,5 ; 2x 300 L/cm-vol.7 ; 2x 280 L/cm-vol.8 ; 2x 200 L/cm-vol.10; 2x 160 L//cm- vol.10; 2x 120 L/cm-vol.12 ; 2x 100 L/cm-vol.15 ; 1x 140 L/cm- vol 16,5 1x 60 L/cm- vol 20, N.260 print sleeves - 8 for each following repeats :m ...

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 185 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 2400 mm Height: 2850 mm Weight: 12 ton Capacity: 200 ton Bending length: 3100 mm

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Manufacturer: GK, Quick-change turning tool holder HB1136 -Recording dimensions: see photos -Clamping length: 200 mm -Quantity: 1x holder available -Dimensions: 200/60/H140 mm -Weight: 3.6 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Manufacturer: GK, Quick-change turning tool holder HB1136 -Recording dimensions: see photos -Clamping length: 200 mm -Quantity: 1x holder available -Dimensions: 200/60/H140 mm -Weight: 3.6 kg

Hofmann long hole drill Manufacturer: Hofmann Type: LL160 Year: Specifications: Drilling dept.: max. 145 mm Drilling length:.: max. 240 mm Height adjutment: max.135 mm Drilling: Dept limitation stopper Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Power: 1,3 kW Drill clamp:: 5 – 20 mm

Hot Foil Stamping Tiegel Heidelberg GTP Heißfolienprägetiegel / Hot Foil Stamping Tiegel Heidelberg GTP Baujahr / Year 1966 - Serial-No. 63 613 Format / Size min. 85 x 102mm Format / Size max. 340 x 460mm Geschwindigkeit / Speed min. min. 1.500sph - max. 4.000sph Stanzkraft / Punching pressure 60T Gewicht / Weight approx. 2250kg Abmessungen / Dimensions 2,08 x 1,48 x 2,10m Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Key data: 3050 mm, 20 mm, 800 mm

Hydraulic Sheet Metal Shear / Hydraulic Guillotine Shear Make: Steiner Type: HTS 30/20 Year of manufacture 1978 -Cutting length: 3050 mm -Cutting thickness: 20 mm -Back gauge: 800 mm, via handwheel - Motor power: approx. 30 Kw -Spare blade Basic machine: 4650 mm long, 2610 mm wide, 3200 mm high Weight: approx. 27,000 kg -Mechanical, in good condition- -Optical, in good condition- Hydraulics leak slightly no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

rockwell hardness: . brinell hardness: . weight: kg dimensions: mm Hardness tester Rockwell measurement with underframe table all technical data without guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering and tarpaulin cover -Platform: 3990/2180/H690 mm -Load capacity: 6.5 t -Tires: Continental Super Elastic 6.00-9 solid rubber -Overall dimensions: 5700/2180/H1000 mm -Weight: 820 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: 30 liters -Hydraulic tank: with level and temperature indicator -Return filter: Hydac RF BN/HC 30 BB 10 A 1.0 -Motor mount: Ø 147 mm / bolt circle Ø 163 mm M10 -Individual components: see photos -Dimensions: 495/340/H375 mm -Weight: 13.8 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit -Hydraulic tank: Hydraulic tank for hydraulic unit -Hydraulic tank: with level and temperature indicator -Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6 -Individual components: see photos -Dimensions: 490/400/H515 mm -Weight: 25 kg.

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 60 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1 mm   integrated feed function: yes STRIP-FEEDER   sheet width max.: 400 mm   sheet  ...

Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: Spindles: 10 Spindle 1: Bottom / 7.5 kW / 50 mm Spindle 2: Right / 7.5 kW / 50 mm Spindle 3: Left / 7.5 kW / 50 mm Spindle 4: Right / 7.5 kW / 50 mm Spindle 5: Left / 7.5 kW / 50 mm Spindle 6: Top / 11 kW / 50 mm Spindle 7: Bottom / 7.5 kW / 50 mm Spindle 8: Top / 7.5 kW / 50 mm Spindle 9: Bottom / 7.5 kW / 50 mm Spindle 10: Universal / 7.5 kW / 50 mm Working width: 170 mm Working height: 120 mm Feed rate: 60 m/min Feed motor: 15 kW Table: Hard-chromed Condition: Gebraucht Location: Tauberbischofsheim, Germany

Punching force: 500 kN Stroke: 32 mm Stroke adjustable: 10 - 32 mm Stroke rate: 35 /min Normal punching device: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching device: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1400 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

: gebraucht : 2002 : 090129 : prompt, Zwischenverkauf v : Türkei : 27800 € : 1 : 3100 mm : 10 mm : 350 mm : 10 1/min : 1.5 ° : 1000 mm : 22 kW : 3800 mm : 3600 mm : 2000 mm : 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of ...

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 24900 € : 1 : 3100 mm : 6 mm : 0.5 - 3.5 ° : 9.5 kW : 950 mm : 4070 mm : 2330 mm : 3400 mm : 1850 mm : 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PU ...

: gebraucht : 1992 : 090174 : Belgien : 17800 € : 1 : 3050 mm : 6 mm : 11 - 25 1/min : 0.5 - 3 ° : 18 : 750 mm : 11 kW : 3850 mm : 1750 mm : 1720 mm : 4600 kg : 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration ...

: gebraucht : 2015 : 090243 : prompt, Zwischenverkauf v : Türkei : 21800 € : 3100 mm : 6 mm : 4 mm : 15 1/min : 1.5 ° : 1000 mm : 15 kW : 200 l : 4110 mm : 2200 mm : 3790 mm : 2100 mm : 7300 kg MIT PNEUMATISCHER BLECHHOCHHALTEVORRICHTUNG Schwingschnittausführung NC-Vorwahlsteuerung D-Touch 7 mit Touch-Screen für Hinteranschlag, Schnittlänge, Stückzahl, USB Anschluss Motorischer Hinteranschlagbis 1.000 mm auf Kugelumlaufspindeln, hochklappbar Übersichtliches Bedienpult aufSchwenkarm montiert Hydraulische Niederhalter nahe an derSchnittkante angeordnet Fußschalter Zentrale manuelle Schnittspaltverstellung Schnittlinienbeleuchtung Breiter Auflagetisch mit Gleitkugeln Stückzähler Einzel- und Dauerhub Hochklappbarer Fingerschutz 1.000 mm 1 Seitenanschlag 1.500 mm mit Skala,T-Nut und Kippnocke 2 Blechauflagearme 1.000 mm mit T-Nut Einfaches Wechseln und Nachschleifender Messer Eins ...

Specially designed for stamping, die cutting, and forming work. Model CM-50NC Power 50 TN Motor power 5.5 KW Throat depth 265 mm Working speed 9.9 mm/s Approach speed 50 mm/s Return speed 66 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700 x 450 mm Upper table 550 x 300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg STRUCTURE AND TABLES The CM/NC series hydraulic presses consist of an electro-welded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed with finite element software. With all this, we always guarantee our high standards of precision and quality. They are equipped with an upper table and a lower table made of C45E ste ...

FBF 4022 MILK HOMOGENIZER 3,500 LITRES/HOUR Manufacturer: FBF ITALIA Model: FBF 4022 Serial no.: 17124175 Year: 2017 Industrial high-pressure homogenizer for milk Capacity: 3,500 l/h Maximum operation pressure: 180 bar Minimum feed pressure: 2 bar Electrical specifications: 22.3 kW/400 VAC/50 Hz/42 A/3PH+PE Overall dimensions: 1,400 x 1,150 x 1,200 mm (WxLxH) Weight: 850 kg CE Marking Includes user and maintenance manual in Spanish

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm table adjustment - longitudinal: max. 660 mm table cross movement: max. 410 mm distance spindle center to table: max. 525 mm table speeds: 2 - 28 m/min table load: max. 400 kg cross feed of table intermittent: 3 - 40 mm rapid traverse cross: 1 m/min grinding wheel size: max. 300 x 50 x 76,2 mm total power requirement: 8 kW weight of the machine ca.: 2,1 t dimensions of machine L x W x H: 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor Manufacturer: Hägglunds Model No.: CA 50 32 SA0 N00 02 19 The engine is NEW and fully functional. see pictures for more details.

Haco 220 x 4 mm (fixed) Capacity : 220 x 4 mm Strokes/min: 35 Fixed angle -- variable angle: fixed: 90° Driven: hydraulic Workspace: 650 x 650 mm Work height: 890 mm Electric motor (power): 2 kW Length : 800 mm Depht : 660 mm Height: 1200 mm Weight: 550 kg

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3670 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 4330 mm Depth: 1950 mm Height: 2980 mm Weight: 17 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 150 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3750 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4700 mm Depth: 1700 mm Height: 2850 mm Weight: 11 ton

Haco ERMS 230 ton x 4300 mm CNC Capacity: 230 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 200 mm/sec Working speed: 8 mm/sec Returning speed: 125 mm/sec Electric motor (power): 19 kW Length: 4320 mm Depth: 2000 mm Height: 2800 mm Weight: 15 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 3500 mm Depth: 1700 mm Height: 2500 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 12 kW Length: 3270 mm Depth: 1500 mm Height: 2460 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton

3 assen: Y1 / Y2 / X bovenste en onderste Amada-systeemtooling Gerenoveerd door Haco in 2024 Capacity: 135 ton x 3600 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4200 mm Depth: 1700 mm Height: 2500 mm Weight: 9 ton Capacity: 135 ton Bending length: 3100 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3700 mm Electric motor (power): 15 kW Weight: 18 ton Capacity: 200 ton Bending length: 4300 mm

Heraues hot air sterilizer for killing pathogens and bacteria. The sterilizer consists of a double-walled, heat-insulated sheet metal housing, door with unlocking, heating, fan and control cabinet. Recirculated air: The circulating air fan draws in the air from the usable space via the heating and blows it back into the usable area when heated. Fresh air: With fresh air, the fan blows air into the interior of the oven. The fresh air is drawn in with the circulating air by the circulation fan and blown into the usable space via the heating.

description Heraues hot air sterilizer for killing pathogens and bacteria. The sterilizer consists of a double-walled, heat-insulated sheet metal housing, door with unlocking, heating, fan and control cabinet. Recirculated air: The circulating air fan draws in the air from the usable space via the heating and blows it back into the usable area when heated. Fresh air: With fresh air, the fan blows air into the interior of the oven. The fresh air is drawn in with the circulating air by the circulation fan and blown into the usable space via the heating.