136,825 used machines on RESALE, but how to find them? Machine Search
Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Voltage: 400 V Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200
Height=1.4 m, Overall length= 0.76 m, Overall width= 1.33 m, Net weight= 300 kg,
Machine feature: Two Günther evaporative condensers Each with 2 x 6 fans Year of construction: 2002
Two built-in refrigeration units from the manufacturers Güntner and Riedel are available. Both units have been in storage for a long time and are uninspected. Documentation available. An on-site inspection is possible.
Evaporator Guntner -Type: S-GHNE 066C/17 -Cooling capacity: 16.8 kW at DT8, 13.3 kW at DT7 -Fin spinning: 7 mm -Electric defrost -Fans: 1 x 660 mm -Dimensions: 1880 x 780 x 970 mm -Quantity in stock: 3 -Reference number: CH 577 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work
Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
Güntner S-GFD 080A/2x7-L Manufacturer: Güntner Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 1900kW Air temperature: 35º C. Fans: 14 pieces, 0.8kW, 3 wires, 400V, 50Hz Dimensions: LxWxH = 8400x2200x2220mm Weight: 3050kg Sound pressure level: 52 dB(A) 10m distance, Condition: Good , Tested for leaks and fans Test run Jenbacher, Dry cooler, Dry Air Cooler, Emergency Cooler, Dry Cooler.
General SKU399X1185 LocationBarneveld MakeGünter Pressure Working pressure41 Bar Main Features Heating (medium)Gas Temp.100 °C Specified Features - Temperature control unit Temperating machinecheck Gas heatingcheck Heating medium:Gaseous Heating capacity—50 / 100 °C Electric capacity230 V MaterialMild steel General TypeGCHC RD 045.2/12-48-4239256M Mach.No.404578695/29 00147 Year of construction2017 Mounted on frameOn legs With switchcheck Floorspace2,05 x 0,90 m Total height1,10 m Weight500 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesTemperature control unitsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedCo ...
Air cooler, evaporator, cold storage, refrigerated container, cold room -Area of application: for connection to a cooling system -Fan diameter: 500 mm -Maximum permissible operating pressure: 8 bar -Permissible operating temperature: 100 °C -Pressure at sub-zero temperatures: 21 bar / -60 °C -Contents: 13.2 liters -Slat spacing: 7 mm -Number: 2x coolers available -Price: per piece -Dimensions: 1350/740/H700 mm -Weight: 174 kg/piece
Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm -Weight: 14 kg
fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan -Manufacturer: Güntner, axial fan, axial fan, suction fan -Power: 2.79/1.36 kW 890/700 rpm -Fan: Ø 1000 mm -Quantity: 1 piece available -Dimensions: Ø 1000 x 330 mm -Weight: 56 kg/piece
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, single-phase power supply -Manufacturer: Günter Kirch, single-phase power supply type NGG -Power: 160 VA -Voltage: PRI 230V 50/60 Hz / SEC 24 VDC -Technical data: see photo type plate -Dimensions: 165/100/H150 mm -Weight: 4.0 kg
Injector Günther PI 17; Curing injector with 17 needles, with new hoses and clamps, instruction manual, Connection 400V, dimensions LxWxH approx. 140x58x180cm, weight approx. 262kg, Year of manufacture 2003, very good used condition, runs perfectly
Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 421 kg,
Evaporator Guntner -Type: S-GHN 071.2H/27-EHS50.E -Cooling capacity: 50 kW at DT8, 40.2 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3500 x 1060 x 970 mm -Electric defrost -Refrigerant: Freon -Volume: 71.5 L -Weight: 387 kg -Quantity in stock: 4 -Reference number: CH 605 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work
Evaporator Guntner -Type: S-GHN 071B/27-E -Cooling capacity: 39.7 kW at DT8, 31.5 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3530 x 850 x 1150 mm -Electric defrost -Refrigerant: Freon -Volume: 54 L -Weight: 317 kg -Quantity in stock: 2 -Reference number: CH 606 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work
Günther GPA 150 vacuum tumbler, 150 liter drum volume, digital control, with Busch vacuum pump 12 cbm from 2018, Machine built in 1998, connection 400V, Total dimensions LxWxH approx. 150x90x170cm, weight approx. 280kg, good used condition, fully functional
This vertical tank from König und Günther is a robust and reliable solution for storing liquids in breweries or beverage production facilities. With a capacity of 50 hl, it is designed for optimal use of space in a vertical position. The tank has a stable construction on three feet, a width of 1.5 m, a height of 3.7 m, and a weight of 300 kg. Its solid construction ensures safe and long-lasting operation and makes it suitable for a wide range of process applications. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: vertical stainless steel tank, Capacity: 5000 l, Width: 1.5 m, Height: 3.7 m, Weight: 300 kg, Position: vertical, Base construction: on 3 feet
Güntner Table Cooler GFH 090.2A/2×2 L(S)-F6/4P Air cooler from 2012, four fans. Was cooling of a 916 KW Jenbacher JMS 412 CHP plant. 1 available 10 bar / -1 bar, 100°C / -50 °C, 159 l. Manufacturer: Güntner Model: GFH 090.2A/2×2 L(S)-F6/4P Type: Table Cooler Serial number: 100/1112041.0001 Max/Min Pressure [bar]: 10 / -1 Max/Min Temperature [°C]: 100 / -50 Volume [l]: 159 Fans 4 x VT01183 Year of Make: 2012 Weight unit [kg]: 1,600 Dimensions LxWxH [m]: 4.50 x 3.25 x 1.50
Manufacturer: Günther, Germany Model: Automatic injector, 16-needle Condition: Fully factory refurbished machine Warranty: 1 year warranty Services included: Delivery, installation, samples, staff training, certificates
Two identical ceiling evaporators are available, max. operating pressure: 28bar, max. operating temperature: 100°C, capacity: 29l, rated capacity at t=8°C: 18.9kW, rated capacity at t=7°C: 15.3kW, surface area: 101.9m², air flow rate: 11,240m³/h, air throw: 2x14m, inlet connection: 22mm, outlet connection: 54mm, defrost capacity (electric): 7,200W, length: 2,480mm, width: 1,565mm, height: 450mm, fan type: VT0139, fan diameter: 500mm, fan speed: 1,380/min, power per fan: 500W, current per fan: 1.05A, sound level: 78dB(A), number of fans: 2. An on-site inspection is possible, the units are not connected to power.
Vendesi scambiatore di calore raffreddato ad aria (Dry Cooler / condensatore) industriale Güntner serie Profile, modello S-GFH 100.2D/1-E(D)-F4/6P. Apparecchiatura solida e affidabile, ideale per impianti di refrigerazione commerciale/industriale, condizionamento o raffreddamento di processo. Dotata di singolo ventilatore assiale ad alta efficienza installato a tetto.
Injector Günther PI 17, brine injector with 17 needles, hoses and clamps, pressure gauges, machine feet at the front, Connection 400V, dimensions LxWxH approx. 132x55x165cm, weight approx. 220kg, good used condition, fully functional
Injector Günther PI 9, brine injector with 9 needles, with new hoses and clamps, Connection 400V, dimensions LxWxH approx. 135x50x174cm, weight approx. 223kg, good used condition, fully functional
2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg
Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg
Technical data Ruwac WS 2220 m Suction: 2,400 Watts Air capacity: 290 m3/h Voltage: 230 Volt Vacuum: 210 mbar Filter surface bag filter: 1.2 or 2.6 m2 Tank capacity: 35 litres Residual dust filters: 3.2 m2 Sound pressure level: 67 dB(A) Inlet: 50 mm
hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg
Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg
Manufacturer NIMAK Model ZT 22/1 Year Condition used Power 22 kwa Kuhl w. Q 4 L/MIN MACHINE IS INCLUDED WITH RAILS TRAWERSES AND BALANCER
Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Price: per piece Quantity: 2 available -Weight: 0.8 kg
manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
manually operated, air-cooled Rated power at 50%ED: 2.5kVA Short circuit current: 8.2kA Electrode force max.: 120daN Projection: 125mm --- equipped with: - 3m connection cable - Standard electrode arms 125mm - Thyristor performance, time, and Pulse controller built-in. --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Hot Air Blower LEISTER Hotwind S ( HotwindS ) Type 9C1.2.2 102.586 2.3 kW 230 V AC max. 400 °C used, tested ! Dimensions: 430 x 220 x 150 mm
High Pressure Spray Gun ECCO 370R 8611 4170 50 See also W550 ! New, with Backing ! Dimensions ( Spray Gun ): 280 x 120 x 60 mm Dimensions( Package ): 280 x 120 x 60 mm
Hot Glue Gun SCA SCHUCKER AK 310-10/H/230V 7845.1000 D Heizung AK 400-450 230 V 0642.1003 New ! Dimensions: 230 x 100 x 130 mm
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 90 mm shaft -made of: gunmetal -Number: 2x bearings available -Price: per piece -Dimensions: 130/130/H160 mm -Weight: 4.7 kg/piece
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing blank: for Ø 45 mm shaft -made of: gunmetal -Number: 13x stock available -Price: per piece -Dimensions: 83/60/H86 mm -Weight: 2.4 kg/piece
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 100 mm shaft -made of: gunmetal -Number: 3x bearings available -Price: per piece -Dimensions: 160/125/H155 mm -Weight: 12 kg/piece
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 35 mm shaft -made of: gunmetal -Number: 1x warehouse available -Price: per piece -Dimensions: 70/49/H65 mm -Weight: 1.1kg/piece
Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gunmetal -Number: 10x stock available -Price: per piece -Dimensions: 92/70/H82 mm -Weight: 2.3 kg/piece
maximum number of results exceeded
please refine your search
10 € 
