guillotine used for sale

Description heavy automatic hydraulic plate shears / guillotine shears up to 50mm with cycle feed Working width approx. 155cm Thickness max. 50mm

Darley GS 1100x20 guillotine, cutting length 1100 mm, sheet thickness up to 20 mm. The machine is fully operational, an additional set of knives.

- year of manufacture 2001 -DTR - after HOMAG service - pre-cutter, earning corners - wooden glue up to 9 mm TECHNICAL PARAMETERS: machine tool adapted for machining PVC/ABS flanges veneer up to 3 mm thick and wood stickers up to 9 mm thick pre-cutter - milling the board belt pressure tank with glue, for hot melt glue granules additionally roll for applying glue heated strip tape strip guillotine - pre-cutting veneer 3 pressure rollers 2 ready-made ball cutting units 2 edge milling units (radial cutters) corner earning unit (milling) scraper aggregates - for removing excess glue polishing units .max. element thickness 50 mm Min. element width 60 mm Min. element length 160 mm feed speed 96 m/min total power 10,8 kW extraction connection diameter 120 mm dimensions (L/W/H) 5700 / 1200 / 2100 mm weight 2000 kg

Hydraulic guillotine shear HACO TSX3006 The machine is located in Spain.

Hydraulic guillotine shears Manufacturer Atlantic Type ATS3000 Year of construction 1996 max cutting thickness 6,0mm cutting length 3050mm New knife on machine in addition there are 2 knives plus 1 stump once new Machine is fully functional, has not been energized for 4 months Anschäge, circulation and documentation available.

sheet width: 1050 mm plate thickness: 3,0 mm ST cutting angle: 2,0 ° stroke max.: 38 p. Min. total power requirement: 5,5 kW weight of the machine ca.: 1690 kg. range L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop () Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mm plate thickness: 25,00 mm no. of strokes: 4 - 8 Hub/min back stop - adjustable: ca. 1250 mm work height max.: 1040 mm Control: SC 70 cutting angle: 0,5 - 3,0 ° down holder: 18 Stück engine output: 56,0 kW weight of the machine ca.: 38.000 kg range L-W-H: 4200 x 2600 x 2650 mm good condition - ready to use (!) New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 200 programs x 127 sets per program Material library max. 32 materials programmable positioning from the backgauge automatic electro-hydraulic cutting gap adjustment automatic electro-hydraulic cutting angle adjustment automatic retraction from the backgauge automatic and manual programming mode Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra ...

Polar 115X guillotine Polar RAB4 jogger + Bizerba scale Polar LW-1000 lift

SCM Selecta 12F edgebander Glue station for granules pressure zone Pre-cutting guillotine Precision cutting unit Milling unit with straight milling cutters Milling unit with profile milling cutters Flat cyclin Polishers CE Certificate 1620kg

Fritsch Easyline used (this is the "little" sister of the Euroline) Total length 5.70 meters! New controls! Cutting roller frame Guillotine Ribbon in very good condition! Electronics checked and repaired. Machine runs very quietly! Device has been cleaned and tested! The device can be viewed and tested on site! Delivery by our own fleet of vehicles is possible (for a fee). Sold only to professionals! Only the written purchase contract is binding! If you have any questions, please feel free to write or call. No warranty, no warranty, or anything else. Exceptions to this are damages due to intent or gross negligence.

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.

Fritsch Easyline combined with Fritsch CTR. The machine for croissants and Danish pastries! Total length 12 meters! Composed of: Calibration head KK Easyline (cutting frame and guillotine) CTR Punching-Turning System CRH wrapper (for unfilled croissants) FRH wrapper (for stuffed croissants) Incl. various décor and cutting knife. Incl. various punches Devices with NEW controls! Ribbons in good / mint condition! Machines very well maintained with few hours of operation! The device can be viewed and tested on site! Delivery by our own fleet of vehicles is possible (for a fee). Sold only to professionals! Only the written purchase contract is binding! If you have any questions, please feel free to write or call. No warranty, no warranty, or anything else. Exceptions to this are damages due to intent or gross negligence.

Peddinghaus Model 210 Super 13 G flat, profile and bar steel shears with notch and perforator in use. Universal profile shears, steel shears; - Pressing force 60 ton; - Flat steel shears; - profiled shears - guillotine shears; -Clinker; - Perforated die-cutter; -Documentation/instruction manual for the machine available.

Used pastry machine RONDO, Type: Polyline - Winding unit - Calibration unit - Cutting drums -Guillotine - Bottler available Further information on request. Visits and test runs are possible by arrangement.

Hydraulic guillotine shear: 1.870x1.070 mm, brand: Gester, model: TN-100, engine: 30 hp, 100 TN force.

Beyeler VE 6.5 x 4080 hydr. guillotine shears, Year of construction 1993, cutting width 4,000 mm, Backdrop-guided knife bar, Auto. Cut / angle adjustment Ermaksan, sheet thickness up to 10 mm, annual security check, Accessories spare knives,

sheet width: 2050 mm plate thickness: 2 mm strokes per minute until: 38 cutting angle: 1,75 ° table height over floor: 870 mm total power requirement: 3 kW weight of the machine ca.: 1520 kg range L-W-H: 2,2 x 0,6 x 1,2 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emerge ...

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.

sheet width: 2550 mm plate thickness: 4,0 mm distance between columns: 2600 mm back stop - adjustable: 750 mm no. of strokes: 42 Hub/min cutting angle: 1°30 table width: 450 mm table height: 800 mm total power requirement: 7,5 kW weight of the machine ca.: 3230 kg dimensions of the machine ca.: 3200 x 2300 x 1350 mm Current new price with special accessories ~ 33.000 euros from a maintenance workshop / good condition () Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 Control unit with touchscreen function 128 MB internal memory (programming possible) Multilingual (English, Turkish, German) INCH/metric conversion - manual cutting gap adjustment, from the front analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball ...

Seewer Rondo Cutting Line / Cutting Table Type: ZFGR. A Year of construction: 2000 with guillotine  with multiple reels with 2x filling station, 2 rows per container (total 4 rows) many accessories incl. Strap width: 64cm, very good condition Dimensions: Height: 180cm Width: 500cm Depth: 80cm

Seewer Rondo Cutting Line / Cutting Table Type: SPF602 with guillotine  with multiple reels Strap width: 64cm, very good condition Stainless steel cladding  on castors Dimensions: Height: 185cm Width: 660cm Depth: 80cm

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

Fritsch pastry line type Easyline - Built in 1999 consist of: Calibration head Cutting roller frame for 2 tools 1 piece worm roller Filling device, 4 rows - Year of construction: 2021 Guillotine various tools, folding shoes, etc. available after consultation Fritsch Croissant Plant Year of construction: 1999 composed of: Punching robot type CTR-700 Winder type CRH 400 (unfilled products)

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

FIMI cut-to-length line for stainless steel 1500x3mm x25t (A3776) FIMI cut-to-length line for stainless steel 1500x3mm x25t (A3776) is perfect solution for stainless steel metal processing. Line is pretty new and very good conditions. It has all important parts for working. All components made by FIMI. FIMI -is top quality coil metal processing machinery manufacturer Manufacturer: FIMI Year: 2004 (2018 was installed new controller box and plc new) Working length: 1500mm Minimum metal thickness: 0.4-0.5mm Maximum metal thickness: 3mm Maximum coil weight: 25t Supply scope: -coil car -decoiler -entrance feeder -entrance shear -levelling machine -wrapping part -guillotine -conveyor -stacker

Machine type: guillotine shears Manufacturer: LOTZE Model: KSS HY/3040 x 7 Year of construction: 1965 Condition: good Type of offer: used machine Specifications: Power: 3040 x 7.0 mm Drive type: el./hydr. Drive: 12.5 kW Remark: rip fence, Front gauge, Material requirements Weight: 7500 kg The machine is in a good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pastry table Rondo Doge SFT 370 A + ZFGRA -with guillotine -with filling container -with cutting rollers -with folding shoes -Strap width: 64cm -Built in 2010 -External dimensions: 380x110x186cm WxDxH

Key data: 3000 , 7 , 1000

Pullmax E-230 - Hydraulic guillotine shears - Incl. operating instructions - Built in 1986 Specification - Max. cutting length: 3000 mm - Capacity: 7 mm - Working height: 1000 mm - Table width: 600 mm - Rear stop stroke length: 5 - 1000 mm - Cutting angle: 0.5 - 4 ° - Oil volume: 160 l - Engine power: 11 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 3500 x 1980 x 2440 mm - Machine weight: 6800 kg

Used pastry machine FRITSCH, type: Easyline -Refurbished- - Unwinding station - Calibration unit (adjustment of dough thickness and width) - Cutting station (longitudinal cutting) - Dosing unit (filler) - Folding shoes (turning over the dough pieces) - Guillotine / punch - Incl. cross roller for dough rolls - new ribbon - 600 mm bandwidth - System completely overhauled - technically flawless, system as good as new - Condition: Very good, ready for immediate use - incl. 6 months warranty The system has been completely overhauled and is in mint condition. Inspection and test run are possible by arrangement.

Bread/rolls/ciabatta/dough sheet composed of Dough divider RHEON type V4 VX122 Stress Free Divider Year of construction: 2010 Dough thickness 20 - 35 mm Dough belt width 200 - 350 mm Weight range approx.: 200 - 10,000 gr. Capacity max. 4.0m/min = approx. 800 kg dough/hour with funnel for approx. 200 kg dough with 2 flourers with star divider oiling with 2 oil pressure vessels with transverse rolling mill with longitudinal cutting rollers with guillotine Spreader belt station with diamond punch bmTEC line for humidification, sprinkling and settling Year of construction: 2010 Double-sided moistening and sprinkling possible with seed reclamation Deduction

Replacement knife set for guillotine shears, tin shears, 2 pieces PAGUS Knife length: 2050 mm Knife thickness: 15 / 16 mm cross-section: 58 x 15 mm / 139 x 16 mm all threads M12 x 1.75 Replacement knife set consists of 2x upper and 2x lower knives ! Other quantities on request ! New ! Dimensions ( Packaging ): 2700 x 200 x 275 mm

This is an accessory to our buffer silos range ([GE253](https://www.germanplast.eu/listings/4115680-buffer-silo-new-m achinery)) not a stand-alone unit., Mostly used to dry EPS scraps Standard configuration (customizable): 1,1 kw fan in a painted steel cage 15,3 kw heating unit size 400x300x300 mm. Metallic cell filters 500×500 mmplete with galvanized steel frame and in/out connections System of pipings 100 and 200 mm diam., curves, clamps, to convey heated air into the silo. Electropneumatic guillotine shutters in galvanized steel. temperature probe, connections. Complete with electric cabinet managing the whole system. User’s manual, drawings, CE compliance

sheet width: 1250 mm plate thickness: 3,0 mm distance between columns: mm power requirement: 2,2 kW dimensions: 3,27 x 1,69 x 1,29 m weight of the machine ca.: 1,6 t used compact mech. guillotine shear - strokes per minute: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine paper cutting machine Ideal 6550-95 EC

Messer für Papierschneidemaschine / paper knife - guillotine Polar 55 Art.: PS832 Ersatzteil Nr. / parts No. 241580 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 685x95x9.7 Number of holes M10: 14 Number of rows of holes: 2 Packaging : Disposable crate

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Messer für Papierschneidemaschine / paper knife - guillotine Polar 55 Art.: PS832 Ersatzteil Nr. / parts No. 241580 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 685x95x9.7 Number of holes M10: 14 Number of rows of holes: 2 Packaging : Disposable crate

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Knife für Papierschneidemaschine / paper knife - guillotine Polar 76 Face cutting knife for Polar 76 Art.: PS342 Ersatzteil Nr. / parts No. 233231 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 925x110x9.7 Number of holes M10: 14 / 2 lift holes Number of rows of holes: 2 Packaging : Disposable crate

Paper knife - guillotine Polar 78 / 80 Art.: PS223 Ersatzteil Nr. / parts No. 424409 (273893) (446280) Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 960x110x11.7 mm. Number of holes M10: 18 Number of rows of holes: 2 Packaging : Disposable crate

Messer HSS für Papierschneidemaschine / paper knife HSS - guillotine EBA 721 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

sheet width: 2030 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, p ...

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

sheet width: 2030 mm plate thickness: 4,00 mm thickness at Niro-steel: 2,50 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, ...

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Bread roll system composed of: Pre-portioner for approx. 130kg dough with long ribbon Head machine type Rustica with 4 and 5-r cutting rollers with guillotine with punching matrices # and // with Passau oiling for rose rolls with TOUCH screen Round-knitting station type Softrounder incl. 1 set of knitting cups Double humidification and sprinkling station with swap bodies with interchangeable straps with storage trolley for conveyor belts or spreading containers Deduction disassembled, not overhauled or cleaned from stock Rottenburg in bakery condition immediately available

1 x Polar N137 Plus guillotine (year 2013), equipped with: air table, 2 side tables, 2 knives, photo cells, program 1 x Polar EL 130-4 unloader (year 2013) 1 x LW 1000-4 stack lift (year 2013) 1 x Polar RA-4 (year 2013)

Perfecta 115 TS High Speed Guillotine Age: 2009 Cutting table width: 1150 mm TS-Control 19" Touch Screen Colour display Cast-Iron Air table Cast-Iron Side Air Tables (Left and Right) Table Light Cutting line light and preclamp function Accessories: Extra Knives