guillotine used for sale

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

DURMA VS 3013 hydraulic guillotine shears were built in 2021 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine is designed for precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 13 mm. The machining is performed by means of high quality cutting knives, which are characterised by high wear resistance and ensure accurate and repeatable cutting even during intensive operation. Automatic adjustment of the knife angle and the gap between the blades enables precise adjustment of the cutting parameters to the type and thickness of the material. The VS 3013 guillotine shears have a work table with integrated balls to facilitate material positioning. Along the cutting line there are hydraulic hold-downs which stabilise the workpiece during machining and prevent it from moving. The operator has at his disposal an advanced control system with  ...

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Size: 760 mm Equipments: EM program Spare Knife Cutting Width760 mm Feeding Depth760 mm Clamp Opening (Max. Stack Height)110 mm Table Height 900 mm

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

LVD MVS-TS 13/31 guillotine shears were built in 2010 in Belgium by LVD Company n.v. The machine is used for the precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 13 mm. The cutting is performed using robust cutting knives, which ensure high repeatability of the process and the quality of the finished parts. The work table is fitted with balls to facilitate the positioning of the material directly beneath the cutting line. All process parameters are programmed in an intuitive CNC controller, whose memory enables the storage of many machining programmes. The MVS TS 13/31 guillotine shears weighs approximately 14000 kg. Technical specifications of the LVD MVS-TS 13/31 guillotine shears - CNC controller - maximum cutting length: 3100 mm - maximum cutting thickness: 13 mm - back gauge stroke: 1000 mm - work table with integrated balls - front suppo ...

YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz

Cutting lenght 6100 mm Cutting thickness 16 mm

MTP HSH-6x3200 hydraulic guillotine shears were built in 2016 in Poland by Metal Technics Polska s.c. The machine is designed for the precise cutting of sheet metal with a maximum length of 3200 mm and a thickness of 6 mm. The cutting process is performed by cutting knives with high wear resistance, which provide accurate, repeatable results even during intensive operation. The work table is fitted with built-in balls to facilitate the positioning of the material in the working area. The MTP HSH-6x3200 also features an ESTUN E21S CNC controller with an intuitive interface and many functions designed to facilitate machine operation. All this is complemented by a robust design which, combined with a 9 kW motor, ensures reliable operation of the machine in demanding industrial conditions. The HSH 6x3200 guillotine shears weigh 7200 kg. Technical specifications of the MTP HSH-6x3200 guill ...

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Darley GS 3100 x 13 mm Cutting length: 3100 mm Max sheet thickness st 45: 13 mm Depth of throat: 300 mm Strokes/min: 9 str/min Backgauge: no backgauge Adjustable cuttingedge: 0° -> 2° Electric motor (power): 22 kW Length: 3600 mm Depth: 2350 mm Height: 2200 mm Weight: 12 ton

Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg

Darley GS 3100 x 8 mm Cutting length: 3100 mm Max sheet thickness st 45: 8 mm Strokes/min: 17 str/min Backgauge: no backgauge Adjustable cuttingedge: 1°30´ Electric motor (power): 15 kW Length: 3550 mm Depth: 2300 mm Height: 1720 mm Weight: 7 ton

Antike Schneidmaschine - antique Guillotine Krause SM Baujahr ca. 1890-1900 - Serial-No. 198240 Very Beautiful antique Guillotine Sehr schönes antike Schneidmaschine

Antike Schneidmaschine - Antique Guillotine Krause 195667 Serial-No. 195667

Offered for sale is a paper cutting machine with mechanical cutting adjustment. Equipped with manually adjustable backgauge, handwheels, operating levers, material support table and foot control. Inspection possible by arrangement.

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schneidmaschine - Guillotine Schneider Senator Senator 115H Year 2003 - Serial-No. M-115H-013-04/10-03 Schnittbreite max. 1150mm / Cutting width max. 1150mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

4 support beams, foot control, hydraulic cutting Auction-ID: A1-50476-2

Size: 580 mm Equipments: Table (stainless steel) 2 extra knives knives changing tools program

Size: 920 mm Equipments: 4x replacement blades

Size: 1150 mm Equipments: Cut-Tec computer control: Digital program storage with an LCD display for automated cutting sequences Air Table 3x extra blades

Offer 24454 Specifications: - Max. cutting width 2520 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - Projection 200 mm - Stroke rate up to 30 /min - Front angle stop 1100 mm - Front support arm 400 mm -Mot. Back gauge 5 - 600 mm - Cut line illumination - Sheet metal hold-up - E – footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t

Auction-ID: A1-51025-4

Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Wohlenberg 76 SPM Serial-No. 3212-011 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives In einem guten Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Polar 76 EM Year 1990 - Serial-No. 6061999 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch / Air Bed Lufttisch - Chromtisch / Light guard - chrome table Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine / Guillotine Serial-No. 1272 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine - Guillotine Polar 115 E Year 2000 - Serial-No. 7031278 Schnittbreite / Cutting width max. 1150mm Einlegetiefe / Feed depth max. 1150mm Einlagehöhe / Clamp opening max. 165mm Programm - Display Lichtschranke / Light guard Lufttisch - Chromtisch / Air Bed - chrome table Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schneidmaschine / Guillotine Polar 115 ED-AT Year 1996 - Serial-No. 6631040 Schnittbreite / Cutting width max. 1150mm Autotrim Lufttisch / Air Bed table Chromtisch / Chrome table Lichtschranke / Light guard Ersatzmesser / Spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Rüttler - Jogger Schneider Senator BR 115 Size 900 x 1150mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutting machine DSN 700 from the manufacturer DÖINGHAUS Voltage: 3 x 400 V, 50 Hz Power: 2 kW Machine dimensions (LxWxH): 160 x 140 x 170 cm Weight: 550 kg Condition: well-kept, in working order Availability: as of now

Ersatzmesser für Schneidmaschinen - Spare Knife for Guillotines Polar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

Manufacturer: Fatosa Type: TBG 480 Year of Make: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum block size: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: Length 1350 x Width 700 x Height 1750 cm With raised front cover - height 2117 mm The guillotine is only equipped with a cross-cutting blade. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007

Specifications: Max. cutting width: 3100 mm Max. cutting capacity for normal steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable rip fence: 1050 mm CNC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Retraction function Sheet metal holding function Stroke rate: 33 cuts Min. Motor power: 5.5 kW Dimensions (length x width x height): approx. 3800 x 2300 x 1950 mm Weight: approx. 6,5 tons

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

Manufacturer: Jsting , Type: PFS 1800, Year: 1964, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: ca.80, Cutting lenght mm: 1800, Schnittbreite min-max mm: 850, Working hight mm: ca.40, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Year :1964

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

sheet width: 2000 mm plate thickness: 2,25 mm distance between columns: 2040 mm total power requirement: 7,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,2x1,7x1,1 m SN-No. 380/6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Fischer Rückle, Type: AFD, Year: 2007, Control: Programm, Double knife: yes, Cutting lenght mm: 4200, Working hight mm: 40, Alignment light: yes, Digital readout lineal guide: yes, Motorische Anschlagverstellung mm: automatisch, Hydraulically driven kinfe beam: yes, Pressure beam: yes, Wight approx. kg: 10000, machine ready for demonstration: yes, Year :2007

Size: 330 mm Equipments: cutting thickness 40 mm

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg