guillotine polar used for sale

1 HOZA pinking machine type ZM 50 (Zigzag cutting), cutting width 500 mm, serrated knife with 4 mm serration gauge, manual actuation

1 POLYTEX pinking machine type ZP-V (Zigzag cutting), knife width 1020 mm, machine equipped with FASNACHT security light guards, stroke up to 65 mm height, up to 50 cuts per minute, PLC and inverter controlled. Fully automatic electric double feed system with 2 programs for simultaneous prechoice of sample length and width. Ensures highest degree of accuracy and operating comfort. Machine delivered with all possible extras/options namely: cutting height adjustment 0-1-2 mm (with or without carton underlay), increased hold-down force with hydraulic speed regulators, reinforced laser pointer.

1 SUCHY fabric winding and cutting machine, year of manufacture 2015, roller surface width 220 cm, Unwinder with pneumatic expanding shaft for cardboard cores, Inspection station, Cross-cut knife holder (for manual cross-cutting), Rewinder with pneumatic expanding shaft for cardboard cores, Speed: 0–50 m/min

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

1 HOZA (Germany) pinking machine type EZM 60 (Zigzag cutting), knife width 600 mm, electrically actuated, year 2019, laser for cutting line indication, machine controlled per PLC, knife with 4 mm serration gauge, up to 30 cuts per minute, 3 x 380 V, 50 Hz,

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

Darley 3100 x 8 mm Cutting length: 3100 mm Max sheet thickness st 45: 8 mm

Guillotine, reel slitter for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T, availability: about 8 weeks time from confirmation

Guillotine, reel slitters for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Haco TSX 3100 x 6 mm CNC Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 8 > 14 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7,5 kW Length: 3880 mm Depth: 1650 mm Height: 1700 mm Weight: 4,5 ton Number of sheet holders: 18x

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

Inv. Num. : 8497 Type: HSLX 3008 Producer: HACO Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 8 mm Back gauge: 1000 mm Equipment: Set of knives Truck with rear handling

Key data: 4050 mm, 6 mm

Year of construction 1988 Cutting length 4050 mm Cutting capacity 6 mm Weight approx. 8500 kg Knife renewed about a year ago.

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine.

Subj.: Offer about second-hand cut-to-length line Dear Mr Rajput, We have pleasure to provide you with an offer about second-hand cut-to-length line that is immediately for sale. Qty. 1 Second-hand cut-to-length line Mfc.: SACMA, UWM Built: 1994 Material: Stainless steel Strip Width: max. 2000 mm Thickness: 3.0 – 8.0 mm De-coiler Coil weight: 25,000 kg max. Leveller: 13 rolls, dia.: 130 mm Guillotine: start / stop type, manufactured by SACMA, Paper / cellophane feeder Stacker Run-out table Dimensions: 34 x 8 m Speed: 30 m/min

This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine.

This FISCHER & RüCKLE FZR15 / DAR 12 was manufactured in 2014. Its a used veneering machine designed for efficient crossfeed glue splicing of veneer strips. Features include a feeding device for semi-automatic feeding, a panel automatic for component-matched faces, and a direct stacking device for gentle discharging. Ideal for applications requiring precise veneer splicing. Contact us for more information about this machine.

LVD MVS 6200 x 6,35 mm Cutting length: 6200 mm Max sheet thickness st 45: 6,35 mm Passage between uprights: 6400 mm Depth of throat: 60 mm Strokes/min: 10 > 465 str/min Adjustable cutting device: 0,05 > 0,7 Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 11 kW Weight: 17,5 ton

sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 2 mm

with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010

Key data: 1020 mm

Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.

Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.

Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm -Weight: approx. 161 kg

Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Size: 550 mm Equipments: Air Table program Photocells defect

Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 870 mm -Hole spacing: 250 mm / Ø23 mm see photos -Quantity: 12x replacement blades available -Price: per piece -Dimensions: 870/23/H90 mm -Weight: 13.5 kg/pc.

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Large working width: 4000 mm for sheet metal with a strength of 40 kg up to: 3 mm Table width: 470 mm Back gauge adjustment: 1000 mm Fixed cutting angle: 1°30' Column projection: 200 mm Hydraulic drive: 380 V, 7.5 kW Space requirement: 4650 x 1830 x 1420 mm high Weight: 5.7 t

Ref. №: 4252 Frozen meat block guillotine 2 pcs knives for transverse cutting 2 pcs knives for longitudinal cutting Block cross-section: 520 x 300 mm Processing temperature: > -25 °C Max. throughput: 5000 kg/h Hydraulic lifting device Machine dimensions in cm: Width: 110,0 Length: 240,0 Height: 190,0 Installed power: 6,0 kW Voltage: 400 V, 50 Hz

Key data: 2050 mm, 4 mm

Used guillotine shears of the make Vimercati type 2050x4 Year of manufacture 1997

Key data: 3000 mm, 10 mm

Used guillotine shears of the make Vimercati type 3000x10 Year of manufacture 1997

Key data: 1030 mm, 2 mm

Used guillotine shears of the make Fasti type 1030x2.5 Built in 1969

Manufacturer: Amada Model: Promecan GHE 630 Type of Machine : Hydraulic Guillotine Shear Find more here - .ucymachines/ Contact us at - sales@ucymachines

Size: 1065 x 1660 mm Equipments: Air table Automatic jogger Plated stainless steel Table size: 1065 x 1660 mm Max sheet size: 1065 x 1660 mm

Size: 1680 mm Equipments: Type: Perfecta 168 HTVC Program with touch screen Monitor Screen Air table (stainless steel) Air table Side tables with air (stainless steel): Left & right Safety cells Stack Lift Type: Pallet feeder Jogger Type: BASA 7

Key data: 2040 mm, 1 mm

used Schechtl hand-held guillotine shears, with hand back gauge, extendable from the front Sheet metal support, automatic. Hold-down Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 2040 mm Blechstärke Stahl/Sheet thickness steel 1,25 mm Sheet thickness Alu 1.75 mm Blechdicke VA/Sheet thickness stainless 0.80 mm Farbe/Colour grün Machine Weight: 650 kg Dimensions/Space requirment 2442 x 756 x 1056 mm Cutting gap adjustment without Automatic hold-down Fixed cutting angle Backgauge min. 5 mm Back gauge max. 500 mm Maschinennummer/Machine number 8604

3000 x 13mm with power back gauge and rear sheet supports

Cut-Max Guillotine -Type: GM-1 -Efficiency: 1500 kg/h -Operating temperature: up to -20°C -Machine dimensions: 2100 x 900 x 1850 mm -Made of stainless steel -Power supply: 3x400V 50 Hz -Weight: 550 kg -Condition: used/overhauled/ready to work

380V 16A Plug Foot control Sheet thickness 1.5 mm Cutting width 1.05 m Length 1.50 m Width 1.70 m Height 1.35 m Color: Green Weight 400 kg Adjustable table Extra table

LVD MVN 3100 x 4 mm Cutting length: 3100 mm Max sheet thickness st 45: 4 mm Depth of throat: 100 mm Strokes/min: 20 > 70 str/min Adjustable cuttingedge: 0.5 to 1.5° Electric motor (power): 15 hp Length: 3720 mm Depth: 1415 mm Height: 1830 mm Weight: 4500 kg

LVD HST-C 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 50 str/min Adjustable cutting device: 0,05 > 0,8 Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton Number of sheet holders: 21x