129,006 used machines on RESALE, but how to find them? Machine Search
1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1974 - Serial-No. 656001 Plus Version with Numbering and Perforation unit N+P Size max. 140 x 180 / 320 x 460 mms Dampening System conventionel Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Guter Zustand - Schneidmaschine aus einer Schule / Good condition machine is from School.
Heidelberg GTO 46 N+P sheetfed offset printing machine YOM 1983 Very good condition 1-color offset press Size 46x32 cm Printing speed: max 8,000 sheets/hour Perforation & Numbering Include in scope of supply: 2x horizontal and 2x vertical Numbering units. Weight: 1145.0 kg Machine size: 1,270 x 1,200 x 1,550 mm
max. format 36 x 52 cm Turn: 4/0 - 2/2 Year of construction 2002 Classic Center Color/Register Remote Adjustment DDS Film Dampening Units Technotrans cooling unit Dry pollinator + Version Laco Coating Plant IR Dryer Baldwin Reading totalizer: approx. 14 million print Price on request. We supply and install worldwide.
Reference Num.: 4211 Brand: Heidelberg Type: GTOZP 52+ Construction year: 1987 Impressions: 32 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 2,190 mm, Width: 1,450 mm, Height: 1,550 mm Total weight: kg 2,850 / lbs 6,283 Power: KW 4 / hp 6 Equipment: - Nummerier- & Perforiereinrichtung - Wendung 2:0 / 1:1 - VARN Kompac III - Puderapparat - Doppelbogenkontrolle
1 color offset Heidelberg GTO 52, 52 x 36 cm format, VARN compac dampening system, as new condition, only ca. 8 mio impressions, plus version, elec. double sheet control in feeder.
impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
UV DRYER GIARDINA FOR HEIDELBERG 52 -Max size 36x52 cms. -UV dryer Giardina model 601/2 Year 1998, totally programmable -Low pile delivery, 2 UV lamps installed 600 W each -Air extraction motor, pipes -Max power 22 KW, 51 Ampere -2,5 meters length
- Single sheet feeder - ALCOLOR dampening units - Baldwin cooling device - Quick action plate clamps - Bacher register system - WEKO T6 powder spray - Minus Version
used perforation bar for Heidelberg GTO 46 only. The bar is in very good condition with side bolts.
17 pieces of new- never used in original packaging ball bearing for ink and dampening rollers number: 6002.2RSR. Can send worldwide.
max. printing speed sheets: 8000 /h max. paper size: 32 x 46 cm dampening system: Aquaprint numbering unit: incl N+P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 76 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm numbering unit: include N+P dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reference Num.: 4233 Brand: Heidelberg Type: GTO 52-4-P3 Construction year: 2003 Impressions: 40 mio Available: directly Status: In production Location: Deutschland Printing units: 4 Equipment: - Plus-Version: vorbereitet für Nummerier- & Perforiereinrichtung - Wendung 2:2 - Classic Center - Puderapparat - elektronische Doppelbogenkontrolle - Neue Walzen - VARN Kompac III
WITH N&P UNIT (numbering & perforating) Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit
Heidelberg GTOZ-52+ of year 1995 Straight machine Kompac dampening
1988 GTOZ-52 Straight machine Numbering + perfurating unit Punching machine Alcohol dampening; envelop feeder
Heidelberg PM GTO 52-2 year 2001 2 colours straight size 36 x 52 cm DDS dampening 88 million impressions in production good condition
Year of construction unknown Impression work Numbering device suitable for GTO 46 4 numbering machines, 7 digits, counting forward Delivery date: immediately from stock
Perfecting 2/2, 4/0 KOMPAC dampening system Bacher register clamps Ink segment Blades with regulation Powder spray
Size: 36x52 counter: 62mio Aquatron dampening Weko powdering Double sheet control Plusversion
-Five colours max paper size 36x52 cms. -Perfecting 2/3 or straight 5/0 -Year 1995, 68 mil. real impressions -Alcolor dampening -Baldwin recirculation and refrigeration system -CPC 1.02 table control for ink motors and plates remote controls -Powder spray, Quick action plate clamps -Plate punch, No NP unit -Complete with all accessories, No damages -In nice conditions -Available immediately
-Four colours size 36x52 cms. with 2/2 or 4/0 -Year 1993, 51 mil. real impressions -Alcolor dampening system -Baldwin refrigeration and recirculation system -CPC 1.02 table control for automatic ink and plate registers -Numbering and perforating unit with cams,wheels and perforators -Quick clamps, plate punch -All parts and tools, Available immediately, any test is possible, in very good conditions
Heidelberg GTO 52+, Year 1995 360x520 mm (14x20"), approx. 33 million impr. Varn Kompac III dampening Single-sheet feeder Plus version Powder sprayer Etc. Available: at short term
Stork PMT B.V. automatic liver harvester, model: PLH NUOVA C1513, type: 1270302, serial number: 10073217, year of construction: 2009, dimensions: 1800 mm x 1600 mm x 2600 mm. Incomplete.
Stork PMT B.V. automatic gizzard cutter, model: PEC CI534, type: 3760409, serial number: 10073195, year of construction: 2009, dimensions: 900 mm x 550 mm x 700 mm.
Stork PMT B.V. special equipment, model: 9900, type: 3763957, year of construction: 2010, dimensions: 1850 mm x 1300 mm x 1500 mm.
vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis
Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw
complete "package" with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification
New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives
Key data: 30 , 28 , 110
Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide
with palletech Table size 800 x 800 mm Table NCRT Number of pallets 14 Movement x-Axis 1300 mm y-Axis 1100 mm z-Axis 1000 mm Table indexing 0,001° Number in tools in magazine 237 pieces Maximum spindle speed 35-7.000 min Tool taper DIN 69871A-50 CNC control M-plus
Key data: 30 , 28 , 110
Single-screw extruder with new 7,5kW drive, new gear box, new cylinder and new screw 30 mm - 28 d, nitrated new ceramic heating elements, cooling fan, temperature sensors Control cabinet integrated in the machine frame Machine frame on wheels Stainless steel hopper
Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.
used
Qty. 1 Second-hand plate milling line - never used Mfc.: SELEMA Type: PMM Built: 2014 Max. scalping area: 1800 x 4000 mm Height: 6 – 200 mm Entry plates planatory tolerance: max. 0.4 on width max. 0.2 on length Entry plates thickness tolerance: +/-0.2 mm Thickness accuracy: +/- 0.1 mm Min./max. milling depth (single milling: 0.1 / 1.5 mm Positioning accuracy: +/- 0.0125 mm Moveable table stroke: 10 mm Movable table speed: 2.5 m/min. Mill dia.: 2.1 mm Mill speed: 490 RPM Milling surface roughness: < 0.25 Ra with cut-off = 1.5 mm & new milling tools
Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.
used
Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)
High speed mixer granulator Aeromatic PMA 1800 Gross volume 1800 Lt. Normal working volume 1500 Lt. Average granulated batch weight 825 Kg Impeller speeds 59/118 rpm Impeller motor capacities 60/75 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW
maximum number of results exceeded
please refine your search
4.000 € 
