gto pm 52 used for sale

Arburg 520C-1300-350 with bimetallic plasticizing system Shot weight: 194 g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 520x520 mm The size of the plates: 715x715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 95 616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes

Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve

Injection weight: 487 g Closing force: 1,500 kN State: Used Screw diameter: 60 Injection pressure: 1390 Column spacing: 520x520 Size of plates: 700 x 700 Control type: Selogica Installed power: 74 Working hours: 63,600 Libra: 7300 Dimensions: 6 m x 2.4 m Feed hopper: NO

Injection Weight: 434g Closing force: 2,000 kN Screw diameter: 55 mm Injection pressure: 1650 bar Column spacing: 520x520 mm Board size: 728x728 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 80000h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, ticketing snail

Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19

Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (length x width x height) [m] 5.35x1.93x2.20

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19 Additional equipment: Single-phase plastic feeder Picker

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection Pressure: 2100 bar Electrical and Hydraulic Equipment: Rated Power of the Pump Motor: 18.5 kW Heater Power: 12.1 kW Dimensions (L x W x H): 4.9m x 1.33m x 2m Net Weight with Control Cabinet: 4.8 ...

Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...

Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg

Producer Arburg Type 520 C 2000 - 800 Year 2005 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x 520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Producer Arburg Type 520 C 2000 - 800 Year 2008 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x 728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Engine Brand: VOLVO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 1572653 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 447 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 520 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 650 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/226672, , = More information =, , Type: Engine, Type number: TAD1630G GENERATOR 520KVA

Injection weight: 141 g Closing force: 1,500 kN Screw diameter: 35 Injection pressure: 2000 Column spacing: 520x520 Size of plates: 688x688 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 33.9 Working hours: 45343 Libra: 6490 Dimensions: 4.9 x 1.7 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Key data: 52 mm, 500 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The Spinner TC400 is in a very good mechanical condition, running 1 layer with light and small machining. A visit to the supplier directly is still possible for a short time, then at our warehouse. Accessories Machine: - Control SIEMENS 840D sl with SHOP TURN - Tool measurement incl. software - Bar feeder SERVO-LOAD 80/1200 -Conveyor - Driven tools and tool holders (used) - Collet chuck for 185 E collets with hydr. Clamping (Footswitch) - 3-jaw chuck ( m. gebr. Baking) - IKZ - Parts catcher - C-axis 360° - Tailstock MK4 with hydr. Clamping (Footswitch)

Description: machine no.: KMM 526 1213 operating voltage: 400 V frequency: 50 Hz , nominal current: 45 A pre-switching fuse: 3 x 50 A control system: SIEMENS SINUMERIK 840 D working spindle: , spindle bearing ,diameter: 70 mm , tool holder: SK 40 , Max. torque value: 45 Nm , spindle speed: 36 – 10500 rpm tool magazine: , number of tools: 42-fold tool clamping: 8000 N , Max. tool diametre: 125 mm , Max. tool length: 250 mm , feed rate: X-axis: 10000 mm/min , Y-axis: max. 10000 mm/min , Z-axis: max. 10000 mm/min , rapid traverse: , X-axis: 60 m/min , Y-axis: 60 m/min , Z-axis: 60 m/min , Max. feed force: , X-axis: 4000 N Y-axis: 4000 N , Z-axis: 8000 N , chiping values: , Max. milling performance: 460 cm³ , Max. drill diameter: 40 mm , Max. thread diameter: M30&nbs ...

Ryobi 525 GE AGE 2011-52 mio PDS-E- RYOBI Semi-RPC- RYOBI-matic- PCS-J-Technotrans Alpha.d- automatic washers

with remote control with digital scales Kind of: overhead travelling crane Capacity: 2,5 ton + 2,5 ton Span: 18 520 mm

RECON Part Number: 0212 3104 0.199.20.73.01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

pressure: 230 t chamfer lenght: 3230 mm throat: 420 mm stroke of ram: 445 mm column daylight: 2690 mm weight of the machine ca.: 16.500 kg dimensions of the machine ca.: 4995 x 3370 x 3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OEM Wartsila 524 TS - Inlet Valve 121101 - 24TS Part number - 121101 Inlet valves are new and unused (Condition - See photos, unused, from a canceled order, stored since 2013). Please kindly note that we also have another Wartsila spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...

Folding machine YOC 2000 1. Folder 4 pockets 2.. Folder 4 pockets good condition

used deck oven Wachtel Columbus EO 520-180 VH, with 3 quail deck ovens, with automatic loading and unloading Erka Toplift with display, in bakery condition, can also be overhauled if necessary, 5 shelves per oven, 54 m² baking area in total, 18 m² baking area per oven, with gas burners, with display controls

Key data: 1040 mm, 4 mm

Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions The rear area is secured by a safety fence with light barriers Knife sharpened Instruction manual available Weight: 1600 kg

Standard equipment approx. 12 million prints

OEM Wartsila 524 TS - Connecting Rod Bearing Set, std. 111406 - 24TS Part number - 111406 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). Please kindly note that we also have another Wartsila spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 520 mm -Holes: Ø15 mm M10 see photos -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 520 mm -Weight: 2,3 kg

Key data: 160 kN, 291 g/PS, 45 mm

Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls

Description: SPECIFICATIONS Character: Herbert Nagel Type: 52856 Year of construction: 1974 Capacity: 10,000 kg Engine: 3 kW Machine dimensions (L×W×H): 2,500 x 2,500 mm Panel parts: Yes weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 3,000 x 1,000 mm

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

Available 3 unit of this oil transformer. Thre three units have perfect condition. The relation is 400-20000 V, and the power 1600kVA.

Used labeler LANGGUTH, type: selfLAN 520-650 - Concentricity magazine for cylindrical vessels - Used for cans of 60 ml, 100 ml, 250 ml and 1,000 ml - Labeler LANGGUTH - Output: up to 100 labels per minute - incl. operating instructions - without conveyor belt but incl. additional belt labeler for larger containers - Machine out of order and in stock - Condition: very good, ready for immediate use More photos and videos on request. Viewing and test run are possible by arrangement.

Drucktank 1500l More then 300 machines new and second hand on our seema .de

pressure: 230 t chamfer lenght: 4250 mm column daylight: 3680 mm throat: 420 mm stroke of ram: 445 mm control: TASC 6000 weight of the machine ca.: 19500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual backgauge up to 550 mm Side stop and table extensions The rear area is protected by a protective fence with light barriers Knife sharpened Operating instructions available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Stama MC 526 / TWIN Vertical Machining center was manufactured in the year 2014 in Germany and has 38403 production hours. It is equipped with a SIEMENS 840D control unit. The machine has a spindle speed of 36 - 12000 rpm.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

Key data: 4200 mm, 1815 mm

Panel Saw Striebig Type 5291 A/G Year of construction 8/90 U Motor 4.4 kW/ 5.5 kW Cutting area L 4200 mm, H horizontal 1815 mm / vertical 1920 mm Cutting depth 80 mm Saw blade diameter 300 mm Saw blade bore 30 mm Saw blade speed 4750 rpm. Incl. extraction duct Wall-mounted machine, non-freestanding Machine dimensions: L 5200 mm x W 1235 mm, H 2575 mm Weight: approx. 900 kg

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130

Key data: 2000 kN

Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Air Valve x 4 Hydraulic Core Pull x 6 Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1520 mm Main motor of the machine - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic tool clamping Proportional valve on the injectio ...

Key data: 1000 kN

Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate ...

Key data: 1300 kN

Arburg 520S 1300-800 / Machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Size of clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot Interface Air valve x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorised service company Arburg in the United States. Metrics: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the se ...

Key data: 2000 kN

Arburg 520C 2000-350/150 / Production line with the Wittmann W731 robot Year of construction: 2008 Injection unit: Screw diameter: 40 mm Spray weight: 166 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 520x520 mm Size of clamping plates: 728x728 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2-Component Injection Molding Machine Very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve x 3 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Parallel Movements Screw diameter in vertical injection unit: ⌀25 mm - 49 g/hp Robot Wittmann W731 Year of construction: 2008 5-axis robots: 3 axes ar ...

Laminating machine GMP Protopic 520 Art.Nr. PS6071

The machine is in good technical condition, possibility to test by prior agreement. Pressure 230 t Table length 3230 mm Installation height 615 mm Throat 420 mm Stand clearance 2690 mm Control system TASC 6000 Machine weight approx. 16400 kg Dimensions 4270 x 1955 x 3200 mm