gto pm 52 used for sale

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

grinding length: 600 mm grinding width: 230 mm workpiece height: 400 mm table surface area: 600 x 200 mm dimensions of grinding wheel: 250x25x51 mm feed: 1...24 m/min cross feed: 0,02 mm power capacity - grinding motor: 5 kW grinding spindle speeds: 800 - 4200 U/min weight of the machine ca.: ca. 2,3 t dimensions of the machine ca.: ca. 2,8 x 2,5 x 2,0 m Optical condition: good: Mechanic: good: The machine can be viewed under current.: # 2512 Switch-on hours 6273 h Machine is functional, but in delivery condition Accesories: Vogel central lubrication Optidress E device Wet grinding device with belt filter Dressing device Electric sine swivel magnet 400 x 175 mm Operation manual Machine is functionally tested and has an electrical test report! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flat Pile Feeder, 1st Plant 4 Bags, 2nd Unit CAS 38/2# 96952157 (2 Bags), Shed Delivery, Compressor

Verdichter, Compressor, Copeland Scroll ZR 40 K3E-TFD-522 Displacement: 9.94m3/h 2900 Red/min. Power, Amp.7 Year: New Refrigerant 134a, and others

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1996 Centrifugal fan series: 522 Article number: 510422 Extraction arm series: 535 Article number: 522435 Flow rate approx. 1200 Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.75 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm• Extraction arm with 4 joints • Intake funnel with shutter • Bracket for wall mounting Weight 35 kg Further welding fume extractors under stock number: 61326, 61328; used

Immediately available used injection p. Drive

Immediately available used starting air distributors

plate width: 7000 mm plate depth: 5250 mm plate height: 330 mm weight: ca. 4400 kg Dimensions: Length: 7000 mm Width: 5250 mm Height: 330 mm The panel field comprises six clamping plates with the following dimensions: 1750 mm x 3500 mm The plates are also available individually. Total Area: 36.75 m² T-Slot Specifications: Number of T-slots: 21 T-slot Spacing: T-slot Dimensions: 58 mm x 34 mm T-slot Depth: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Immediately available Elevated main start valve

Key data: 1500 kN, 35 mm

warehouse no.: 503299 manufacturer: ARBURG type: Allrounder 520 S 1500-290 controller: Selogica year of construction: 2018 operation hours: 17400 h clamping force: 1500 kN distance between tie bars h:: 520 mm distance between tie bars v:: 520 mm size of mould plates h: 695 mm size of mould plates v: 695 mm min. mould height: 450 mm max. open daylight: 1025 mm opening stroke: 575 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.42m x 1.61m x 2.2m total weight: 5900KG equipment included: screen text german cascade control unit-interface pneu.6x core pulling hydraulically 2x machine without material hopper mould heating 12x

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Outer 400 mm, mounting cone 196 mm, DIN 55027 size 11 Fmax 9000 daN, nmax 3000 min-¹, bayonenette lock 6 bolts

Immediately available used injection pump

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Year: 2011 - technically efficient, ready to work - after full service - for shaped/arched posts

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm grinding flange included Made in Germany Control:SIEMENS 840C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm

turning diameter over bed: 500 mm turning diameter over slide rest: 1150 mm turning length: 1040 mm Control: total power requirement: 12 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE

CATALOG NO. 6903 TECHNICAL DATA - max width of the processed element 230mm - max height of the processed element 160mm - number of spindles 5: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm, electrically adjustable right/left 7.5kW 4) horizontal top 230mm, electrically adjustable up/down 11kW 5) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm in advance: - 6 pulling and toothed input rollers, including 2 double rollers 2 pulling, rubber, double output rollers from down: - toothed pulling, metal, swivel input shaft - smooth metal pulling roller - side pressure - pneumatically adjustable rollers - length of the introductory tabletop 1980mm - central lubrication - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - feed on cardan shafts - feed m ...

This APV Gaulin MC 45 homogeniser is a 3-cylinder machine which is designed for 20.000 liter per hour with a maximum pressure of 172 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on the inlet and manometer on the stages. Piston diameter: 76 mm. Motor: 90 kW - 380 V - 172 Amp - 50 Hz - 1485 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly  ...

Specifications: Grinding length: 750 mm Grinding width: 250 mm Grinding headstock/ Drive power: 5 kW Table clamping surface: 720 x 200 mm Grinding height to center spindle: 500 mm Grinding wheel: 225/250 x 25 x 51 mm Max. table load: 100 kg Power supply: 3 phases, 400 V

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

Kalenderstanze - Calender Punch Machine Renz Super 520 Year 1967 - Serial-No. 3659 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Folding machine MB multipli-cas 524 Serial-No. 78261 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Schneidmaschine wie Neu / Gullotine like New Ideal 5255 EASY-CUT Baujahr / Year 2019 - Serial-No. 1429278 Schnittbreite / Cutting width max. 520mm Einsatzhoehe / staple high max. 80mm Einlegetiefe / Infeed deep max. 520mm Restschnitt / minimum Cutting size 35mm Masse / Dimensions  B860 x T1120 x H1293mm Gewicht / Weight 261kg Ersatzmesser / Spare Knife Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

power capacity: 3 kW feed pressure: 10 bar liter capacity: 420 l7min intake capacity: 520 l/min 0: 270 l turning speeds: 800 U/min sound - pressure - turn off level ca. max.: 71 dB total power requirement: 3 / 0,35 kW weight of the machine ca.: 170 kg dimensions of the machine ca.: 1,6 x 0,5 x 1 m Electric 400 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic feeder with 2 air suction units Thermal oil sealed heating roller Cutting unit Sheets size : 530x750 – 220x220 mm Sheet weights : 130-350 g/m² Speed : 25 m/m (3700 sheets SRA3/hour – 1800 sheets B2/hour)

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

3.0 carrying capacity 150kg weight Suitable for Euro recording

3.0 carrying capacity 150kg weight Suitable for Euro recording

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1997 Centrifugal fan series: 521 Art. No: 510521 Extraction arm series: 535 Art. Ref: 522535 Flow rate approx. 1000 m3/h Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.37 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm • Extraction arm with 3 joints •Suction funnel with shutter • Bracket for wall mounting Weight 35 kg Other welding fume extractors under stock number: 60890, 61327, 61328; used

General SKU235U235 LocationBarneveld MakeIlchmann TypeDTSF 2x200x6.525 Mach.No.CRO 0348 Main Features Motor3 KW Length6525 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter200 mm (2x) Length6525 mm Between inlet and outlet5880 mm Shaft diameter108 mm (x) Pitch200 mm Inlet630x350 mm Outlet350x350 mm Max. temperature90 °C With adjustable packing glandscheck Motor3 kW, 220-230 volt / 380-400 volt, 1456 rpm Screw speed31 rpm With coverscheck Information Year of construction2014 Total height0,49 m CEcheck Floorspace8,3x5,1 m Weight1250 kg Extra SpecificationsCapacity: max. 5 m³/hHorizontal screw conveyorsIlchmannConveying systems > Horizontal screw conveyorsBrand > Ilchmann What you can expect from Foeth: -- Machine is in wo ...

Screw diameter: 40 mm Calculated injection volume: 217 cm³ Length/diameter ratio: 23 L/D Pressure on the material: 2377 bars Nb Temperature zones: 5 N CLOSING UNIT Closing force: 1500 kN GENERAL Heating power: 13 kW Total installed power: 22 kW Oil quantity: 345 l. Dimension: (WxHxD) 4.47 x 2.19 x 1.51 m. Weight: 6400 Kg

Control Type: MC4 Number of hours: 37,121 H Closing force: 110 T Opening stroke: 600 mm Between columns: 470 x 470 mm Tray dimensions: 745 x 770 mm Mini/maxi mould: 300 mm Max gap between trays: 900 mm Injection: Screw diameter: 45 mm Screw length: 20 D cm3: 275 Bars: 1878 General: Motor power: 18.5KW Heating power: 13KW Closing weight: 6T Options: Cores: 2 Robot interface: YES Bi metal: YES Others: accumulators

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

- Exhibition machine - TERSA planing shaft, electric height adjustment, digital display for planing thickness ---------- Technical data ---------- planing width: 520 mm, thickness table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planing shaft: 120 mm, number of knives: 4 pieces, clearance height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min., speed: 5,000 rpm, suction nozzle: 120 mm, Motor power 400 V: 9.5 hp / 7.0 kW, weight: 695 kg new exhibition machine

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Description: With water bath Internal dimensions: 600 x 450 mm With 4 drawers Approx. Onsite Dimension. (l x w x h): 700 x 600 x 800 mm, weight approx.: 150 kg

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 715 x 715 Clearance between columns (hxv) [mm] 520 min./ max. mold height [mm] 250 / 500 injection unit Screw diameter [mm] 55 Injection weight [g] 310 Injection pressure [bar] 1720 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 6.00 x 1.50 x 2.40

Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2

Clamping force [kN] 1000 Clearance between columns (hxv) [mm] 420 x 370 min./ max. mold height [mm] 230-730 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 250 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.4 Heater power [kW] 18.4 Dimensions and weight Dimensions (L x W x H) [m] 4.3 x 1.5 x 2.0 m

Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2 Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...

Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: mm 600 - Mold development height: mm 300 - Opening width: mm 900 - Ejector stroke: mm 150 - Ejector force: 22/10 kN Injection unit: - Screw diameter: mm 45 - Injection pressure: 1878 bar - In ...