gto pm 52 used for sale

Recon Part Number: 0337 7317 = 0187-30-01.50 6-cylinder Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0332 3651 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0205 4915 Engine 3 incl. DNV-GL test Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 -Motor: Homag 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Dimensions: 520/450 / H570 mm -Weight: 66 kg

Ref. no.: 18273 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x 728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Ref. no.: 18271 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Pneumatic cylinders, air cylinders, pneumatic rams, compact cylinders -Manufacturer: Wabco Westinghouse, compact cylinder -Stroke: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Number: 2 Stück -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 20 mm -Thread length: 525 mm -Dimensions: 680/100/H70 mm -Weight: 4.6 kg

PLC control, electronic module, noise filter -Block Part.No.: B 0901031 -UR: 520 V 50-60 Hz 30 Aac -Dimensions: 270/70/H95 mm -Weight: 1.7 kg

MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 2.5 m -Water cooled -Number: 2x wire feeders available -Price: per piece -Weight: 5.5 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 27 x 192 mm -Weight: 0.25 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm -Weight: 1.7 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 192/27/H27 mm -Weight: 0.15 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 202/27/H27 mm -Weight: 0.25 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 65 mm -Piston diameter: 125 mm -Piston rod: 32 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/144/H144 mm -Weight: 9.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 230/49/H49 mm -Weight: 0.85 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 412/54/H54 mm -Weight: 1.60 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 4 pieces -Dimensions: 205/45/H45 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 85/56/H45 mm -Weight: 0.35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 233/65/H65 mm -Weight: 2.35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 405/75/H75 mm -Weight: 3.6 kg/piece

PLC control, machine control, module -Make number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Number: 2x available -Price: per piece -Weight: 200 g

Straight grinder, straight grinder, belt grinder, internal cylindrical grinder, angle grinder, cut-off grinder -Pneumatic straight grinder -Length: 520 mm -Dimensions: 800/130/H130 mm -Weight: 5.5 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 1050 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Thread mounting: M12 -Total length: 1210 mm -Total length extended: 2260 mm -Number: 2x cylinders available -Price: per piece -Weight: 4.1 kg

Computer, board computer, organizer -Manufacturer: CV90-52689-12 -Type: CV90-52689-12 -Number: 2x organizers available -Price: per piece -Weight: 0.8 kg

Measuring device for air conditioning units, air conditioning systems, cooling units -Type: Testo 523 -with: various hoses -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 490/400/H130 mm -Weight: 5.5 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 525 mm -Length: 585 mm -Plate thickness: 28 mm -Plate: is solid -Groove width: 20 mm -Grooves spacing: 127 mm -Thread: M12 -Weight: 63 kg

Control amplifier, servo motor control -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

Three-phase motor, electric motor -Power: 0.22 kW -Speed: 2880 rpm -Shaft: Ø 12 mm -Construction: B3 -IP protection - -Dimensions: 230/160/H190 mm -Weight: 8 kg

Pneumatic cylinder, air cylinder, standard cylinder -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm - Stroke: 100mm -Pressure: max. 10 bar -Number: 1x available -Weight: 7.2kg

Gear motor, electric motor -Manufacturer gear Lenze type: 52307 04 111 -Manufacturer Motor Bauknecht Type: RF0,37/4-7 -Speed: 94 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 19 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 390/220/H180 mm -Weight: 15 kg

Band sawing machine Kasto HBA 520 AU saw area 350 x 350 mm, table load 7000 kg. Machine immediately available and available. Free truck loading.

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Refurbished and Used Cylinder Heads

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

Folding machine MB multipli-CAS 524 Machine Type: FN

We sell our LAMEC 520, which was in use until recently, with die quick coupler; Drive press: new motor 1x 75kW with 1450rpm + alternatively 1x 110kW with 985rpm for biomass, incl. 2 pcs Pcs conditioners and 2 pcs dosing units frequency controlled; Control with star/triangle combination for 75kW motor, incl. several roller wheels and various dies; built-in die 4x40 for animal feed,

impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 11000 /h max. paper size: 38,1 x 52 cm serial no.: 52510098 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: Hengstler, rotary encoder with cable and plug -Type: R158-02000EK.42KD 0 522 166 -Voltage: 10-30VDC -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: 160/70/H80 mm -Weight: 0.4 kg

x-travel: 750 mm y-travel: 1000 mm z-travel: 870 mm Control: 840 D total power requirement: 29 kW weight of the machine ca.: 22,5 t dimensions of the machine ca.: B 3,2 x L 6 x H 3.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52” length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24” backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...

Injection molding machine by Battenfeld Wittmann. The injection molding machine is from 2018 and has been with us since the news, serviced only in Battenfeld Polska, full history, documentation. The injection molding machine has only 6600 hours of working life. Injection molding machine like new. Upper injection unit - not used, turntable - not used. screw diameter mm 30 specific injection pressure bar 2042 calculated injection volume ccm 106 screw L / D ratio 22 plasticization efficiency g / s PS 12 air injection speed - standard ccm / s 85.7 Cylinder heating system power kW 10.4 SmartPower Rotary Table Table diameter mm 750 Table height mm 140 Table weight kg 1,200 Time of table rotation by 180 ° sec 1.2 Max weight of the mold kg 600 Number of connections 4 x G3 / 8 Max weight of the mold on the turntable kg 1,000 power of the drive system kW 37 oil tank cap ...

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet. - 06.B21 robot connection according to Euromap 67 - 06.D10 charging zone temperature set from the level of the control system 4. 06.K40 Quality table 5. 06.K01 Graphic functions of a ...

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...