130,400 used machines on RESALE, but how to find them? Machine Search
Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt
A complete cut-off grinding system is available. Product length range: 750mm-1400mm, product diameter: 75mm/100mm, max. deflection at 1400mm: 10mm, tolerance at 75mm: +/-5mm, tolerance at 100mm: +/-9mm, operating hours: 20653h. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking unit. 4) Bar rotating drive and measuring station. 5) Weighing station with cut piece sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible. Expected to be available from May 2026.
Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.
A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.
Kodak Magnus 400 F with stacker, using Kodak Sonora XTRA 3 process free plates, under power in print shop. Available immediately.
used
Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm
Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...
Machine Name: Decanter Centrifuge Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year of Make: 1993 Max. Drum Speed: 3250 1/rpm Material: Stainless Steel Drive motor: 18.5 / 21 kW Inner diameter drum: 353 / 198 Inner drum length: 1200 mm Permissible. Sediment density: 1.2 kg/dm3 Dimensions: Length 3000 x Width 1000 x Height 1150 mm Curb weight: 2500 kg Tech. Documentation: Yes Remark: Eddy current brake Accessories: A control cabinet Condition: Used Price: On request
Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -
Sandretto Serie 9 type 4170/500 - 500 T Year : December 2002 Clamping Force : 500 T Screw Diameter : 80mm Injection Volume : 2056 cm3 Injection Pressure : 2027 bar Platen Sizes : 1300 x 1300 mm Distance Between tie bars : 900 x 900 mm Tie Bar Diameter : 150mm Min/max mold high : 300 / 1000 mm Moving Platen Stroke : 950mm Ejector Stroke : 380mm Oil Filling : 900 Litres Dimensions : 8520x2660x2165 mm Weight : 21,000Kg
x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...
bed width: 350 mm turning length: 1.000 mm control: Manual plus 620 Heidenhain greates pass round over bed: 430 mm Swing dia. over traverse guideway: 220 mm Main spindle:: turning speed range - main spindle: 1 - 3.600 min/-1 power capacity - main spindel: 9 / 11 kW max. Torque: ca. 200 Nm spindle head: DIN 55027 / 6 spindle diameter in front bearing: 110 mm spindle bore: 80 mm usable bar diameter: max. 80 mm Tool Mount:: System: MultiFix Shank diameter: 20 x 20 mm axis stroke:: x-axis: 230 mm z-axis: ca. 1.000 mm Tailstock:: diameter of quill: 70 mm quill stroke: 150 mm taper of center: MK 5 steady: hollow: fix: 12 -150 mm hollow: var: 12 -125 mm feeds:: rapid traverse: X: 10 / Z: 7 m/min feed power: X: 4 / Z: 5 kN total power requirement: - kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,8 x 2,1 x 1,9 m Documents: Tailstock: steady rest: 1x Coolantsystem: M ...
x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.08.2003 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Drive: 6 x 2 Certificate of Registration: EM250897
Key data: 400 KW, 500 kVA, 230 V
New CUMMINS gas generator. 400 kW in a soundproof container. Price is for the generator in the container. (Can be equipped with heat exchanger equipment) K19N-G4 engine; Leroy Somer TAL-A473 generator Voltage 230/400 Volts
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.04.2006 Category: Truck Body name: semi-trailer Exterior color: green Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Transmission: Manual Drive: Rear Certificate of Registration: EN403451
Injection moulding machine Engel DUO 4550/800 BJ 2004
Used machine DMU40eVo with EROWA Magazine Machine type: CNC machining center 5-axis vertical Model: DMU40eVo with EROWA Manufacturer: DMGMORI Control: CELOS Heidenhain TNC640 Year of Make: 2019 Location: Germany #001371 Options: -Motor spindle speedMASTER® HSK-A63 -Spindle speed 20-20,000 min-1 -NC swivel rotary table -Tool magazine 210 places -Scraper chip conveyor -Internal coolant supply (IKZ) paper belt filter 20-80bar -Advanced chip flushing -Blowing air through the center of the spindle -Rotating lens -Oil and emulsion mist separator mechanical - Infrared touch probe -Tool breakage detection TRS2 -Preparation 3D quickSET -Signal light, four-color -DMG MORI automation interface -Pneumatic control of the PowerChuck 210 zero-point clamping system -EROWA Robot Compact (ERC80) -Magazine:15x rack level PC210 with 3 pos. each = total 45 pos. Changes, Thi ...
Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional
Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm
Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, cyclone, base plate, feet, water box with water valves, inlet and outlet pipes with manometers and service tools for maintenance., Additional features:, Excluding:, - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Motor: 15 kW - 380 V - 50 Hz - 1.450 rpm - 30 Amp - 3 Ph, Weight: 1.550 kg, Dimensions: 145 x 110 x 175 cm
Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool. , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm
Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Motor: 80 x 60 x 40 cm
Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc. Article number: 10886801., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm
Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm
Unused Bowl Spindle for an Alfa Laval MRPX 409 SGV Separator., Type of Machine: Bowl Spindle, Drive line: 50 Hz
Overview This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3
grinding diameter: 850 mm grinding length: 4.000 mm centre height: 525 mm workpiece weight max. betw. centres with steady: 5.000 kg control: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/min feed X-axis: 0,01 – 6.000 mm/min Travel Z-axis (table): 4.500 mm Travel X-axis (grinding spindle): 650 mm Grinding wheel: - Max. Dimension: Ø1.060x60x304,8 mm grinding wheel speeds: 1.100 min-1 peripheral speed: 45 m/sec power: 22 kW tail stock: - Taper: MK 6 quill travel: 100 mm diameter of quill: 115 mm Workpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1 torque of the drives: 41,5 NM control: total power requirement: 52 kW weight of the machine ca.: 25,5 t Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top ...
: 0,4 - 3 mm Workingpiece thickness from to: 8 - 60 mm Feed speed: 8 - 14, Vario m/min. Premilling unit: Ja : Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. working diameter: 610 mm max. working lenght: 1.522 mm travel -x axis: 740 mm travel -y axis: 410 mm travel -z axis: 1.838 mm control: MAZATROL Fusion 640M Pro b-axis: 240 ° c-axis: 360 ° number of spindle speeds: 4.000 U/min spindle bore: 88 mm milling spindle turning speed range: 12.000 U/min numbers of positions in the tool changer: 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 80 mm max. turning diameter: 395 mm Max. Turning length: 750 mm control: System TX 8H max. Spindle speed: 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lift system, Megamat, shelf size: 2.24 x 0.61m, height approx. 4.26m, 360kg / shelf – used - : Price ex location: 15.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat / Kardex Year of Make: 2001 Type: Megalift 14436/50/4260 Device number: 70744 Max. load capacity per tray: 360kg Permissible total load: 40,000kg Device height: approx. 4.26m Width: approx. 2.45m Depth: approx. 2.45m Number of shelves approx. 60 pieces (still to be verified on Tuesday, 24.3.26) Dimensions shelves: approx. 2,248mm x 612mm 3/N/PE 230/400V, 12A, fuse supply cable 16A Condition: used Available: immediately Location: D-77728 Oppenau
Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned
Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned
Model: BR1800/400 Year: 1994 Condition: Used Serial Number: 2403199 Stock Number: 3000 Belt width: 400 mm Description: Hold down belt, circulation pump, oil level control, prepared for CO2 fire extinguisher Frying length 1800 mm Heating electric, 36kW Power: 3 x 400V, 50Hz, 38kW Dimensions:4300 x 1400 x 1450 mm
For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO ...
B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW
Labeler Manufacturer: HERMA Type H 400 8 L S/N 21127178
Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.
Key data: 2000 mm, 23 mm, 18 mm
4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed
Key data: 3000 mm, 40 mm, 35 mm
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow. ...
4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine
Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
grinding diameter: 850 mm grinding length: 4000 mm centre height: 425 mm control: Siemens 8 max. workpiece weight between centres: 3000 kg workpiece weight in steadies max.: 4000 kg max. workpiece weight -without tailstock: 300 kg vertical Stroke: 0 - 90 °/deg. work piece spindle speed: 23 - 230 U/min workpiece-spindlehead motor: 5,3 kW grinding spindle head - swivable: +30 / -10 °/deg. dimensions of grinding wheel: 750 x 125 x 305 mm table feed: 0,01 - 4000 mm/min rapid traverse of table: 10 m/min table swivelabel +/-: +3 / -3 °/deg. grinding wheel speed: 25 - 50 m/sec grinding motor: 19 kW dimensions: 14,0 x 3,13 x 2,6 m total power requirement: kW weight of the machine ca.: 19,4 t dimensions of the machine ca.: m Universal external cylindrical grinding machine, modernised in 2011 Siemens 828D control system Internal grinding head, swivelling MPM grinding wheel balancing machine ...
Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
