gto 52 4 used for sale

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.

This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

Ryobi 526 GX Typ 6-8, Built: 2007, Impressions: ca. 54.8 Mio. Printing units: 6 ,Format max.: 37,5 x 52 cm, Perfecting: NO Equipment: Suction belt feed table, pull mark presetting.semi-automatic plate changer, Ryobi PCS-H control console.automatic blanket washing device, automatic inking roller washing device, electronic double sheet control, IR dryer, serial equipment and manuals. Available immediately.

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

Key data: 1500 kN

Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...

Key data: 1000 kN

Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

Key data: 1000 kN

Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...

Key data: 1300 kN

Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...

Max. feed length: 2,600 mm Direct input of the dimension via touchscreen or via glazing bead calipers Profile slide can be folded up for insertion

IDEAL 5221-90 – Professional Pile Cutting Machine Powerful and precise paper stack cutting machine for printers, copy shops and offices. The IDEAL 5221-90 impresses with a cutting width of 520 mm and a cutting height of up to 80 mm, ideal for large paper stacks. The electric backgauge with digital measurement display enables fast and accurate work. Thanks to high-quality Solingen knife steel, clean and precise cuts are guaranteed. The SCS safety system ensures maximum safety during operation. ✔ Cutting width: 520 mm ✔ Cutting height: up to 80 mm ✔ Electric backgauge ✔ Digital measurement display ✔ Robust professional quality Ideal for professional cutting work with high demands on precision and reliability.

Cart beam punching machine / travelling head die cutting press 25 ton, 1600 x 500 mm, punching head 500 x 500 mm with 2-hand touch triggering, with light curtain approx. 1500 kg

Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - / Contact us at -

saw blade diameter: 510 mm cutting diameter: 150 mm capacity 90 degrees: flat: 450 x 150 mm capacity 90 degrees: square: 150 mm turning speeds: 29 / 58 m/min. total power requirement: 4,2 kW weight: 1,55 t range L-W-H: 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

Internal grinding machine VOUMARD 52A

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

Reference Num.: 4430 Brand: Ryobi Type: 524HE Construction year: 2004 Impressions: 60 mio Available: directly Status: In production Location: Europa Printing units: 4 Equipment: - RYOBI Semi RPC - RYOBI-matic - automatische Wascheinrichtung - Kühlgerät Technotrans alpha.d - Maschine OHNE Wendung - Farbfernsteuerung - Plattenstanze - Puderapparat

GMP PROTOPIC 520 MAX SHEET SIZE 520 X 720 MM MAX SPEED 15 M / MIN AUTOMATIC SHEET SEPARTOR MANULA FEEDER OIL TEMPERATURE CONTROLLED LAMINATING ROLLER COMPRESSOR

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 20 mm -Thread length: 525 mm -Dimensions: 680/100/H70 mm -Weight: 4.6 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Rexroth, pneumatic cylinder type 522 215 043 0 -Stroke: 25 mm -Piston: Ø 100 mm -Piston rod: Ø 30 mm -Number: 3x cylinders available -Price per piece -Dimension: 430/113 / H113 mm -Total weight: 11.8 kg / piece

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S5 Serial Interface communications processor CP 521 SI -Type: 6ES5 521-8MA22 -Number: 3x module available -Price per piece -Dimensions: 110/45/H135 mm -Weight: 0.2 kg/pc.

Socket distributor, portable distributor, solid rubber distributor -Manufacturer: Bals, solid rubber distributor type 524446 -4x: earthed socket 16A 230V -1x: CEE socket 16A 400V -1x: CEE socket 32A 400V -1x: CEE socket 63A 400V -Protection class: IP44 -Transport dimensions: 400/340/H350 mm -Weight: 15 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich type ECE 20 -Hydraulic pump: Type 0 542 015 191 -Engine: Type 1 547 220 524 24 V 2.2 kW -with: tank and control valve -Quantity: 2 pieces available -Price per piece -Dimensions: 220/120/H370mm -Weight: 9 kg/piece

Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Stacking boxes, stacking boxes, steel boxes, Euro stacking boxes, , Euro stacking containers, Euro stacking containers, transport and stacking containers, material boxes, rubbish containers -Manufacturer: Schäfer, metal container material box stackable -Material: galvanized steel -Number: 14x Container available -Price per piece -Dimensions: 1000/520/H615 mm -Weight: 39 kg/pc.

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Pillow Block Housings, Plummer Block Housings, Pillow Block Pillow Block Housings, Pillow Block Housing Unit, Pillow Block Housing Units, Pillow Block SKF, Pillow Block Housing Unit -Manufacturer: GLH, split pillow block housing type SNG 524-620 -Bore diameter: 157.5mm -Number: 3x bearing housing available -Price per piece -Dimensions: 410/190/H280 mm -Weight: 26 kg/pcs

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 520 mm -Holes: Ø15 mm M10 see photos -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 520 mm -Weight: 2,3 kg

Turning tool with indexable jaws, clamp holder, turning tool, indexable insert holder, turning insert, indexable insert steel, inner diameter drill holder, turning tool holder, boring bar -Turning tool: Boring bar inner diameter drill holder with indexable insert -Type: Length 520 mm -Order No.: 701-12-201119 -Dimensions: 520/40/33 mm -Weight: 4.3 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Meidinger, blower radial fan with support frame -Engine power: 0.55 kW -Speed: 2850 rpm -Volume output: 42 m³/min -Protection class: IP 44 -Fan wheel: Ø 300 x 110 mm -Connection input: Ø 190 mm -Connection output: Ø 190 mm -Dimensions: 630/530/H560mm -Weight: 48 kg

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing, double row, unused -Type: NNU4976 E1 -Outer diameter: 520 mm -Inner diameter: 422 mm -Width: 140 mm -Number: 3x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 520 x 140 mm -Weight: 60 kg/piece

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Yokohama, Complete wheel Super Lug 520 2 pieces tire with tube and rim -Tire size: 7.00-12 12PR14 -Bolt circle: Ø 220 x 26 mm -Hub bore: Ø 170 mm Quantity: 1 piece available -Dimensions: Ø 680 x 185 mm -Weight: 33 kg

Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink  ...

Dough sheeter with simple manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400 V, 16A-CEE plug Used machine & SAB tested Quality from a specialist company! Benefit from over 35 years of experience!

Sheeter Sinmag SM 520 F Easy manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400V, 16A-CEE plug Used machine

Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm

Very good conditions

Heidolph Pumpdrive PD 5206 Peristaltic Pump 1 Channel Motor speed: 24 to 600 rpm Flow rate: 1.3 to 3.9 mL/min Weight 7.7 kg With HEIDOLPH SP QUICK single-channel pumphead In excellent condition Year of Manufacture: 2006

A precision lathe is offered: distance between centers: 1500mm, center height: 265mm, swing diameter over bed: 530mm, speed range: infinitely variable up to 2000rpm. Machine dimensions X/Y/Z: approx. 2700mm/850mm/1400mm, weight: approx. 2100kg. The brake has a problem. Inspection possible by appointment.

A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.

Metal Band Saw manufactured in 1999. This KASTO HBA 520/620 U features a working area of approximately 520 x 620 mm and includes a roller conveyor for efficient material handling. With a total length of around 350 cm, this machine is designed for precision cutting in metal applications. If you are looking to get high-quality cutting capabilities, consider the KASTO HBA 520/620 U machine we have for sale. Contact us for further details.

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...