gto 52 4 used for sale

grinding length: 600 mm grinding width: 200 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bausch Advanced Type 529 IV bag filling & sealing machine with Telstar aseptic isolator system, sequence of operation: VHP Chamber (Decontamination) - Debagging/Bag loading table - IV bag infeed conveyor - Laser engraving - Robot loading - Starwheel transport - Gas purging – Filling (product tank/buffer vessel with 20 litre capacity, mass flow measuring system with 2 flow meters, filling accuracy +/-1.0%, CIP/SIP) - Stoppering - Discharge/Reject Robot - Discharge Chute - Reject Chute - Weigh station/discharge conveyor, Mettler Toledo IPC (in process check weighing) system is capable of performing 100% weight verification of each bag. Fully processed bags exit the discharge conveyor and are transferred to the MettlerToledo scale, where they are weighed. Allen-Bradley ControlLogix PLC with Caitron CR17 touchscreen, machine floor space 4590 x 2649 mm (LxW), machine working height 900+/-30 ...

Size: 520 x 720 mm Equipments: 4 buckle plates vertical pile feeder 1 Knife

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min

Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible.

Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

There are 2 identical Grasselli membrane skinning machines available. 1) Year of construction: 2013, working width: 520mm, dimensions X/Y/Z: approx. 700mm/700mm/1000mm. 2) Year of construction: 2014, working width: 520mm, dimensions X/Y/Z: approx. 700mm/700mm/1000mm. On-site inspection is possible.

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

Cutting machine IDEAL 5221-05 EP, machine number 2848081, year of manufacture 2008, in good condition, immediately available Rsbr Sbovt Rt Ao Nwkou If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

WB Busser can washer type WB 521 – For cans, jars and soft packaging, The can washer WB 521 the brand WB Busser offers an efficient and reliable solution for cleaning a wide variety of container shapes – including Cans, glass containers and flexible packaging,, The system for sale was used to clean large cans., Dimensions / weight: Space requirement: L x W: 4,800 x 1,740 mm

Leather splitting machine Camoga C 520 L with 50cm working width

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4600 mm, 2200 mm

Striebig Panel Saw Compact 5220 Brand: Striebig Type: 5220 Compact with TRK extraction M-No.: 41596 Year of Make: 2010 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm Rpm: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,200 mm Max cutting height: 2,100 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,980 mm Machine depth: 1,466 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: 2ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

Key data: 4600 mm, 2070 mm

Striebig Panel Saw Compact 5207 TRK - 2005 Brand: Striebig Type: 5207 Compact TRK M-No.: 30215 Year of Make: 2005 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm RPM: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,070 mm Max cutting height: 1,958 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,838 mm Machine depth: 1,428 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

max. format 37.50 x 52 cm Year of construction 2000 Shed Feeder Suction belt table Remote register adjustment Tilt register remote adjustment Semi-automatic plate changing Ryobimatic Film Dampening Units AAC - Aqua Automatic Control System Dry pollinator Reading totalizer: approx. 72 million print Price on request. We supply and install worldwide.

chucking diameter: 250 mm greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 850 / 1350 mm weight of the machine ca.: 2700 KG dimensions of the machine ca.: 2900 x 1953 x 1825 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding machine MB multipli-cas 524 Serial-No. 78261

Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  punching and cutting signatures in line 

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife

charge load: . Diameter: . mm Diameter: Bechälter 1700 mm serial number: MP-70-3-4-99-A1 : 5221 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automated casing in line with Co-Pilot pre-setting system Composed of : Co-Pilot computerized set-up and memory with touch-screen color monitors Star-wheel infeed to AR rounding and backing element with various size rounding irons to HL backlining unit with 1st position gluing & gauzing station 2nd position hot gluing, paper lining and head & tail banding EMP casing-in element with DBA case bending unit, heated former for cases, various formers for size changing Robotec RO concept glue station Delivery belt to Kolbus FE 604 – pressing and building-in machine with star-wheel infeed (s/n 2410) 6 stations of whole surface smashing and heated joint forming with touch-screen. Without Stacker Including accessories, tools & manuals. Technical specifications : Book block format, Max: 305 x 375 x 80 mm Min : 100 x 100 x 2 mm Mechanical speed : 20 – 60 cycles/min.  ...

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329

max. format 37.50 x 52 cm Year of manufacture 2004 Shed Feeder Suction belt table Remote register adjustment Tilt register remote adjustment Semi-automatic plate changing Ryobimatic Film Dampening Units Technotrans cooling unit Dry pollinator Reading totalizer: approx. 50 million pressure Price on request. We supply and install worldwide.

Mobile labeling machine for round bottles. Machine incl.: hot stamp system , 3-roller system. PLC: SIEMENS Simatic S7-300 Label dispenser type Pagomat 15/120E.

The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.

Year: 2008 Impressions ca: 86 mil - Max Format: 375x520 mm - PCS-G: consolle for ink and register control with touch panel. Electronic control of double sheets. Electronic control of the sheet missing. Pointing tape sucked. Photocells. Automatic ink regulation from consolle. RyobiMatic-D: alcool dampening with variable speed. Refrigerator Technotrans. Automatic Washing of blankets, rollers and impression cylinders. Semi-RPC: Semiautomatic Plate Changer. Circumferential, assial and diagonal registers. Extended delivery. High pile delivery. Powder spray Grafix. LED UV Books and tools.

Height=0.95 m, Overall length= 0.7 m, Overall width= 0.75 m,

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

Specifications: Workspace: Max. circumferential diameter: 680 mm Circumferential diameter via X-guide: 565 mm Chuck diameter: 250 / 315 mm Plane stroke (X): 315 mm Longitudinal stroke (Y): 1350 mm Spindle box: Spindle diameter in the front bearing: 150 mm Spindle bore: 107 mm Main Drive: Power of the three-phase main drive: 36 / 45 kW Torque (100% ED / 40% ED): 600 / 750 Nm Speed range (100% ED): 20 - 3200 rpm Speed range (40% ED): 20 - 4000 rpm Tool carrier: Number of tool stations: 12 Cylindrical shank diameter: 50 mm Switching time 30°: 0.16 sec. Tailstock: Tailstock, travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill holder: MK 5 Coolant Facility: Content: approx. 220 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, ...

A tunnel washing machine WB Busser for cans is available. Outlet dimensions X/Y/Z: approx. 520mm/300mm, conveying height: 1040mm, max. product dimensions X/Y: 375mm/180mm, conveying speed: 7m/min, max. throughput capacity: 3600/h. Machine dimensions X/Y/Z: approx. 4800mm/1750mm/2050mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Table sheeter Fritsch Mini 520 0.5Lx0.5L Year of manufacture: 2013 Machine technically checked-cleaned with dry ice. Belts have signs of wear. Machine tested

Key data: 680 mm, 1300 mm, 4000 1/min

Year of construction 2003 Spindle Hours 11600 Siemens Control 810D max. circulation 680 mm Circulation via X-guide 565 mm Longitudinal travel 1300 mm Planweg mm 315 Spindle head h5 Spindle diameter in front bearing 150 mm Spindle bore 107 mm Chuck diameter 315 mm max. torque 600 Nm Spindle speed 4000 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Tool carrier for 12 tools Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Dimensions of the machine with chip conveyor L/W/H 570/2600/2210 mm Machine weight approx. 10000 kg Accessories: Bezel clamping range 30-245 mm Conveyor Lathe chuck

cutting diameter: 520 mm saw band length: 7239 mm cutting range square: 520 x 520 mm feed length: 500 mm feed length: 4500 mm cutting length min.: 6 mm : 10/100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm weight of the machine ca.: 4,2 t dimensions: 2300 x 3420 x 2385 m Control: MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

- Optional chuck 1200 mm - 2 Axis RSF Digital read out - Conical turning attachment - Spindle bore 130 mm - Central lubrication

Reference Num.: 4283 Brand: Ryobi Type: 525 GXP Construction year: 2008 Impressions: 64 mio Available: directly Status: In production Location: Deutschland Printing units: 5 Equipment: - Ryobi PCS-H - Wendung 2:3 / 5:0 - RYOBI halbautomatischer Plattenwechsler - IR Trockner - Puderapparat Grafix Digital 3000 - Elektronische Seitenmarkenkontrolle - elektronische Doppelbogenkontrolle - Ultraschall-Doppelbogenkontrolle - Hochstapel Ausleger - Schuppenanleger - automatische Gummituchwascheinrichtung

Shaking table Müro; cleaned and tested; Format 52x33cm; vibration strength adjustable; Tabletop device. Jogger Müro; cleaned and checked; size 52x33cm; adjustable in jogging; table top machine.

Laminator Protopic Plus 520 Year of manufacture 2007

turning diameter: . mm turning length: . mm control: . type: . CCUO turning diameter over slide rest: . mm cross movement: . mm spindle passage: . mm turning speeds: . U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.  ...

Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

- 3 Guide ways construction - Double V Prima guide ways - Steady rest 600 mm - Steady rest 7800 mm - 4 Chuck 800 mm - Oil Country 160 spindle bore - Optional Larger chuck up to 1500 mm

General SKU397X1119 LocationBarneveld MakeDe Dietrich Type525 l. No.23046 Year of construction1993 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume525 Ltr. Pressure6 Bar Specified Features - Pressure vessel MaterialGlass - Enamel Capacity525 Ltr. Vessel sizesø 800x1100 mm Dished topcheck Dished bottomcheck Top connectionsDN50 OutletDN25 Max. temperature-10 / 200 °C Information Mounted on legscheck Weight650 kg Floorspace1,20x1,00 m Total height1,85 mPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar  ...

Cutting length: 4.300 mm Cutting height: 2.200 mm Cutting depth: 80 mm output: 4,4 kw saw blade diameter: 300 mm turning speeds: 4.750 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KOMORI L 528 + Cx year 2002 A 5 Colors Offset press with Coater of size 52 x 72 cm (x33 Mio. Imp.) Including : PQC with Diagonal Cyl. Register, KMS, KomoriMatic Dampening with Technotrans, All Washers, S APC Auto. Plate Loading, AMR at Delivery Auto. Size settings, IR Dryer Baldwin, Coating Unit with Extended Delivery, Machine 30 cm Raised, Beil Plate Puncher and Bender, Grafix powder spray, Chromed Imp. Cylinders, Straight. Immediately avalaible, In Very Good condition

A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement.