gto 52 4 used for sale

Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

Lg.Nr. 24029 Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Material replenishment machine - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Key data: 2500 kN, 40 mm

Manufacturer: ARBURG Type: Allrounder 630 H 2500-400 Control: Selogica Year of Make: 2019 Technical data closing page Clamping force: 2500 kN Wooden dimensions h x v: 630 x 630 mm Panel size h x v: 900 x 900 mm Min. installation height: 300 mm Max. installation height: 750 mm Plate spacing max.: 1300 mm Opening travel: 550 mm Ejector stroke: 225 mm Ejector force: 86 kN Centering of movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 40 mm Displacement: 201 cc Spray pressure: 2000 bar Worm torque: 550 N Outdoor injection flow: 251 g/s hp Dimensions & Weight Machine dimensions LxWxH: 7.05m x 2.05m x 2.35m Total Weight: 13050KG Equipment Screen text German CEE socket 16A Machine including handling Machine with water battery Machine without material hopper Machine without protective enclosure Levelling elem ...

Compressor Pack Make: Grasso Model: 411 Year 2005 Freon Previously used for a 10 ton ice machine Does not include control panel

Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

Bosch 0 / 811 404 039 / 0 831 006003 Solonoid valve

turning diameter: max. 560 mm turning length: 600 mm control: 840D powerline Siemens greates pass round over bed: 680 mm Swing dia. over traverse guideway: 565 mm centre distance: 620 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 37 kW max. Torque: 390 Nm spindle nose: 170H5 spindle bearing diameter: 120 mm usable bar diameter: 65 mm max. chucking diameter: 250 mm C-Axis: 0,025° / 360 ° Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1 power capacity - Sub spindle: 25 / 33 kW max. Torque: 213 Nm spindle bearing diameter: 90 mm spindle bore: 57 mm spindle nose: 140H5 C-Axis: 0,025° / 360 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 4.500 min -1 power capacity - driven tools: 12,2 kW tool taper: VDI 40 DIN 69880 Tool dimensions with sq ...

Key data: 1350 KW

Power 1800 HP Engine type V type V12 Speed 2300 RPM Bore 128 mm

Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Max power 350 hp 3800 rpm Max torque 700 Nm Number of cylinder 6

Pile feeder - separating head 2 buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Sheet size : 490x650 mm - min. 120x172 mm (only Parallel fold) - min. 105x172 mm (with special equipment) - min. 174x174 mm (with cross fold) Fold length: min. 58 mm Paper weight : 40-250g/sqm Pile height : 590 mm Speed : 180 m/min

Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-

Assembly line with 4 assembly stationsRoller conveyor made of aluminium system profile and INTERROLL metal rollersVery universally applicable due to modular elements and assembly pallets 400x700 mmRoller conveyor elements made of aluminium system profile MiniTec - like BOSCH REXROTHExperium height: 815 mmComplete length: 13250 mm4 pieces Longitudinal roller conveyor: usable width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each3 pieces transverse roller conveyor: usable width 705 mm, length 1000 mm, width: 810 mm, 10 rollers each1 piece transverse roller conveyor: Usable width 705 mm, length 2500 mm, overall width: 810 mm, 30

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025.

Swing diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, swing diameter in the recess: 540mm, spindle bore: 52mm, speed: 1400rpm. Quill taper: MK4, manual quill adjustment: 160mm, upper part displacement: 10mm. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible.

Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.

Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible.

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

A Rotox lock and copy milling machine including a small manual Dalex spot welding machine is available. Profile width: 125mm, profile height: 50mm, milling dimensions X/Y: 265mm/125mm, vertical/horizontal spindle speed: 12000rpm/9000rpm, machine dimensions X/Y/Z: 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

A total of 8 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible.

Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible.

Max. pipe diameter: 400mm, power: 2.9kW, max. pipe thickness: 6mm. Documentation available. On-site inspection is possible.

A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible.

Allen Bradley 440R-N23126 SER-C MSR 127T Safety Relais

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible.

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.

A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible.

: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mm serial number: 109967 volt: 380 V frequency: 50 Hz weight of the machine ca.: 500 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 450 mm Länge x-travel: 500 mm workpiece height: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca 1990 fabric-no.: 42965 : x-travel: 500 mm y-travel: 400 mm quill stroke: 300 mm weight: 3,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 28043 weight: 3 t pressure: 30 t volt: 380 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP : water cooling unit: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 410 mm z-travel: 450 mm : travel: x vor 1000 mm control: mc4va total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm miter: . : Kühlung weight of the machine ca.: 1 t number: 4 Stück The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibration tester for Electronic devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.