gto 52 4 used for sale

S. No.: 1139 // Print counter (m): 66,6 // Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

Komt er aan

Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg

Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.

HANS GROHNI GH 524 -Year 2008, Only one owner Sheet-fed offset press - Printing units: 4 colours straight Counter: 11 million Technical features: Speed max : 12,000 sph Paper size max: 520 x 370 mm Paper size min: 148x100 mm Paper thickness: 0,04 to 0,4 mms Print size: 510x360 mm Plate size: 510 x 410 x 0.15 mm Power : 12 Kw - 3 phase / 200V 50/60Hz 60A Dimensions: L. 4,34 mt. P. 2,20 mt. H.1,70 mt. Weight 8.000 Kg. circa Accessories included: - Fully equipped - SAPC - Semi automatic plate change - Laser duct inks - Chrome Cylinders - Rotary stream vacuum tape suction feed board - 2 feeder boards - Electromechanic double sheet detection - Electronic double sheet detection - Alcool dampening system with alcohol metering; cooling and re-circulation unit system - Powder sprayer device - Automatic roll wash device, plate cocking - Low pile - Tools, Docume ...

CNC Slant-Bed Turning Center manufactured in 2005. This CMZ TBI-520 features a maximum swing over bed of 520 mm and a maximum turning length of approximately 1,100 mm. It is equipped with a 12-station turret and a hydraulic 3-jaw chuck with a diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the CMZ TBI-520 machine we have for sale. Contact us for further details.

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 15726.53 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 447 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 520 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 650 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-volvo-tad1630g-generator- 520kva/364, , = More information =, , Type number: TAD1630G GENERATOR 520KVA

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer : Microm Model : HM 520 Condition : used Find more here - .ucymachines/ Contact us at - sales@ucymachines

Printing machine Ryobi 522 HE Very clean and well maintained. Year of manufacture 2007 Maximum paper size of 37 x 52 cm Two Colors Straight Machine approx. 35 million print 50 million revolutions Equipment: Ryobimatic dampening system with Technotrans Automatic Blanket and Roller Washing Equipment Paper thickness of 0.04-0.5 mm Speed: 11,000 Powder

4 printing inserts(cassettes) for Muller Martini Grapha Progress 520 format : 25.5". No damages, in very clean and good condition, ready for production. Pitch 1/4 " Blanket cylinder is clamped. Loaded on wooden pallets. Can ship worldwide.

8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.

Key data: 2000 kN, 240 g/PS, 45 mm

Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Single Needle Double Lockstitch Flatbed Machine

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

grinding length: 600 mm grinding width: 200 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bausch Advanced Type 529 IV bag filling & sealing machine with Telstar aseptic isolator system, sequence of operation: VHP Chamber (Decontamination) - Debagging/Bag loading table - IV bag infeed conveyor - Laser engraving - Robot loading - Starwheel transport - Gas purging – Filling (product tank/buffer vessel with 20 litre capacity, mass flow measuring system with 2 flow meters, filling accuracy +/-1.0%, CIP/SIP) - Stoppering - Discharge/Reject Robot - Discharge Chute - Reject Chute - Weigh station/discharge conveyor, Mettler Toledo IPC (in process check weighing) system is capable of performing 100% weight verification of each bag. Fully processed bags exit the discharge conveyor and are transferred to the MettlerToledo scale, where they are weighed. Allen-Bradley ControlLogix PLC with Caitron CR17 touchscreen, machine floor space 4590 x 2649 mm (LxW), machine working height 900+/-30 ...

Size: 520 x 720 mm Equipments: 4 buckle plates vertical pile feeder 1 Knife

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min

LANG Embossing Station 52610 for Makro-Grip® Clamping Technology A LANG embossing station type 52610 is offered for the preparation of blanks for the proven Makro-Grip® clamping system from LANG Technik. The embossing station enables the clamping contour to be embossed into raw materials and thus ensures form-fitting, process-reliable workpiece clamping in 5-axis machining. Facilities Manufacturer: LANG Technik Type: 52610, older version Embossing station for Makro-Grip® clamping technology Form-fitting pre-stamping of raw parts High process reliability in machining Robust industrial design Easy and fast handling Pros Maximum holding forces at low clamping height Optimal accessibility for 5-axis machining Reduction of vibrations and workpiece movements Fast and reproducible workpiece preparation Ideal for raw materials in single part and series production Areas of  ...

Useful width: 520 mm Max pass: 300 mm Motorised table rise and fall Anti-kick-back safety device 4-knife cutterblock Motor 4 kW

Cutting machine IDEAL 5221-05 EP, machine number 2848081, year of manufacture 2008, in good condition, immediately available Rsbr Sbovt Rt Ao Nwkou If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

WB Busser can washer type WB 521 – For cans, jars and soft packaging, The can washer WB 521 the brand WB Busser offers an efficient and reliable solution for cleaning a wide variety of container shapes – including Cans, glass containers and flexible packaging., The system for sale was used to clean large cans., Dimensions / weight: Space requirement: L x W: 4,800 x 1,740 mm x H: 2,050 mm, Internal dimensions of the salt storage hopper: 500 mm x 400 mm x 400 mm,: Space requirement: L x W: 4,800 x 1,740 mm x H: 2,050 mm, power: Space requirement: L x W: 4,800 x 1,740 mm x H: 2,050 mm

Leather splitting machine Camoga C 520 L with 50cm working width

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4600 mm, 2200 mm

Striebig Panel Saw Compact 5220 Brand: Striebig Type: 5220 Compact with TRK extraction M-No.: 41596 Year of Make: 2010 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm Rpm: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,200 mm Max cutting height: 2,100 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,980 mm Machine depth: 1,466 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: 2ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

Key data: 4600 mm, 2070 mm

Striebig Panel Saw Compact 5207 TRK - 2005 Brand: Striebig Type: 5207 Compact TRK M-No.: 30215 Year of Make: 2005 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm RPM: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,070 mm Max cutting height: 1,958 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,838 mm Machine depth: 1,428 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

max. format 37.50 x 52 cm Year of construction 2000 Shed Feeder Suction belt table Remote register adjustment Tilt register remote adjustment Semi-automatic plate changing Ryobimatic Film Dampening Units AAC - Aqua Automatic Control System Dry pollinator Reading totalizer: approx. 72 million print Price on request. We supply and install worldwide.

chucking diameter: 250 mm greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 850 / 1350 mm weight of the machine ca.: 2700 KG dimensions of the machine ca.: 2900 x 1953 x 1825 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding machine MB multipli-cas 524 Serial-No. 78261

Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  punching and cutting signatures in line 

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife

Fully automated casing in line with Co-Pilot pre-setting system Composed of : Co-Pilot computerized set-up and memory with touch-screen color monitors Star-wheel infeed to AR rounding and backing element with various size rounding irons to HL backlining unit with 1st position gluing & gauzing station 2nd position hot gluing, paper lining and head & tail banding EMP casing-in element with DBA case bending unit, heated former for cases, various formers for size changing Robotec RO concept glue station Delivery belt to Kolbus FE 604 – pressing and building-in machine with star-wheel infeed (s/n 2410) 6 stations of whole surface smashing and heated joint forming with touch-screen. Without Stacker Including accessories, tools & manuals. Technical specifications : Book block format, Max: 305 x 375 x 80 mm Min : 100 x 100 x 2 mm Mechanical speed : 20 – 60 cycles/min.  ...

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2