gto 52 4 used for sale

1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO 52+

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1974 - Serial-No. 656001 Plus Version with Numbering and Perforation unit N+P Size max. 140 x 180 / 320 x 460 mms Dampening System conventionel Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Guter Zustand - Schneidmaschine aus einer Schule / Good condition machine is from School.

Heidelberg GTO 46 N+P sheetfed offset printing machine YOM 1983 Very good condition 1-color offset press Size 46x32 cm Printing speed: max 8,000 sheets/hour Perforation & Numbering Include in scope of supply: 2x horizontal and 2x vertical Numbering units. Weight: 1145.0 kg Machine size: 1,270 x 1,200 x 1,550 mm

Reference Num.: 4211 Brand: Heidelberg Type: GTOZP 52+ Construction year: 1987 Impressions: 32 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 2,190 mm, Width: 1,450 mm, Height: 1,550 mm Total weight: kg 2,850 / lbs 6,283 Power: KW 4 / hp 6 Equipment: - Nummerier- & Perforiereinrichtung - Wendung 2:0 / 1:1 - VARN Kompac III - Puderapparat - Doppelbogenkontrolle

1 color offset Heidelberg GTO 52, 52 x 36 cm format, VARN compac dampening system, as new condition, only ca. 8 mio impressions, plus version, elec. double sheet control in feeder.

Size: 0x0 Equipments: DDS dampening Plusversion

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UV DRYER GIARDINA FOR HEIDELBERG 52 -Max size 36x52 cms. -UV dryer Giardina model 601/2 Year 1998, totally programmable -Low pile delivery, 2 UV lamps installed 600 W each -Air extraction motor, pipes -Max power 22 KW, 51 Ampere -2,5 meters length

- Single sheet feeder - ALCOLOR dampening units - Baldwin cooling device - Quick action plate clamps - Bacher register system - WEKO T6 powder spray - Minus Version

- Single sheet feeder - conventional dampening - Plus Version

used perforation bar for Heidelberg GTO 46 only. The bar is in very good condition with side bolts.

17 pieces of new- never used in original packaging ball bearing for ink and dampening rollers number: 6002.2RSR. Can send worldwide.

Reference Num.: 4390 Brand: Heidelberg Type: GTO 46 Construction year: 1978 Size: 320 x 460 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 320 x 460 mm Printing speed: max 8,000 sheets/hour Printing units: 1 Machine size: Length: 1,270 mm, Width: 1,200 mm, Height: 1,550 mm Total weight: kg 900 / lbs 1,984 Power: KW 2 / hp 2

max. printing speed sheets: 8000 /h max. paper size: 32 x 46 cm dampening system: Aquaprint numbering unit: incl N+P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 76 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm numbering unit: include N+P dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1979 1 Color Plus version 32 x 46 cm Numbering and perforating unit Complete with all tools, parts and manuals In production Located: Germany Available: immediately

WITH N&P UNIT (numbering & perforating) Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit

Heidelberg GTOZ-52+ of year 1995 Straight machine Kompac dampening

1988 GTOZ-52 Straight machine Numbering + perfurating unit Punching machine Alcohol dampening; envelop feeder

Heidelberg PM GTO 52-2 year 2001 2 colours straight size 36 x 52 cm DDS dampening 88 million impressions in production good condition

Year of construction unknown Impression work Numbering device suitable for GTO 46 4 numbering machines, 7 digits, counting forward Delivery date: immediately from stock

Counter (m): 98 Format (cm): 32x46

KOMPAC DDS Dampening Ink segment Blades with regulation Quick action plate clamps Perfecting 1/1, /2/0 Powder spray

Perfecting 2/2, 4/0 KOMPAC dampening system Bacher register clamps Ink segment Blades with regulation Powder spray

Size: 36x52 counter: 62mio Aquatron dampening Weko powdering Double sheet control Plusversion

Conventional dampening + Version Numbering and perforating unit

Heidenhain LS 403 ML 270 mm 226 520

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 27 x 192 mm -Weight: 0.25 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 192/27/H27 mm -Weight: 0.15 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 202/27/H27 mm -Weight: 0.25 kg/piece

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

Ref. no.: 18591 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Key data: 1600 kN, 184 g/PS, 40 mm

Arburg 520A-1600-400 (228) Hybrid Injection Moulding Machine Number: 228 Availability: in stock Year of production: 2007 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 40 Spray weight [g]: 184 Injection pressure [bar]: 2000 Clamping force [kN]: 1600 Gap spacing [mm]: 520 x 520 Panel size [mm]: 795 x 795 Control Type: Selogica Tongue: English, German Installed power [kW]: 21.2 Working hours [h]: 83564 Weight [kg]: 9000 Dimensions [mm]: 5500 x 2000 Feed hopper: NO Robot Socket: Yes Air valve: 3x

Lippert belt conveyor GF 5235-550-400 RA1607 Technical data: Conveying length (NL): 5235 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 5235 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

transformator 5200kva 10.000 volt primair 400 volt secundair 50hz year 2006 7500Ampere DYN5 total weight 12.135kg transformer located in our yard: Kranenpool 10 6443VA Brunssum NL

Key data: 1500 kN, 40 mm

ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitroge ...