133,982 used machines on RESALE, but how to find them? Machine Search
Substructure for conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand, frame for roller conveyor -Manufacturer: Soco System, base frame height adjustable -Type: Width 475 mm -Height: 535 to 900 mm, continuously adjustable -Quantity: 1 piece base available -Transport dimensions: 475/180/H535 mm -Weight: 8 kg/pc.
General SKU036S123 MakeGladiator TypeMY 7/4743 No.689 LocationBarneveld Material Jacket materialMild steel Main Features MaterialStainless steel Volume300 Ltr. Motor9.5 KW Specified Features - Tumbler mixer V-type tumbler mixercheck Capacity300 l. (total capacity) Diameterø 550 mm Length/Depth900/450 mm Inlet2x ø 550 mm Outletø 200mm With jacketcheck With motor5.5 kW 400 V 960 rpm With variable speed drivecheck Speed mixer6 rpm With lump breakercheck 1000 rpm With motor4 kW 400V 960 rpm MaterialStainless steel 1.4401 (316) Information Mounted on mild steel framecheck Floorspace3,0 x1,4 m Total height2,4 m Weight1600 kg Extra SpecificationsWITH INTENSIFIER BAR - OVERHAULED - DiscountTumbler mixersGladiatorDiscountMixers > Tumbler mixersBrand > Gladiator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...
2 G / Liebherr, 400 V / 50 Hz, 26000 hrs since revision, KWe: 360, Working hours: 26000
Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.
pressure: 1.000 t nominal power: 10.000 kN stroke length max.: 1.650 mm working feed: 62 mm/sec weight of tools max.: 40.000 kg voltage: 400 V total power requirement: 420 kW weight of the machine ca.: 254 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU409X1229 MakeNetzsch LocationBarneveld CEcheck TypeStativrührer Main Features MaterialStainless steel Volume43 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Open stirring vesselcheck Capacity43 Ltr. Vessel sizesø 300 x 600 mm Conical bottomcheck Flat top sidecheck With covercheck Outletø 30 mm With turbo stirrercheck With dissolver stirrercheck Motor1,1 kW (Ex) Speed mixing shaft1000 rpm Information No.2800170-11 Year of construction2016 Mounted on legscheck Floorspace1,1 x 1 m Total height2,3 m Weight400 kg ATEX compatiblecheck Extra SpecificationsWe have the bottom disk for this one in the box of the Netzsch rs 2/PM is informed, guess spacer is a problem to install : easy / BRFStirring vesselsNetzschStirring vessels > Stirring vesselsBrand > Netzsch What you can expect from Foeth: -- Machine is ...
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 13000; Gross weight [kg]: 13000; Engine: 4TNV98CTIHR; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 330
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1300; Gross weight [kg]: 1300; Engine: 4TNV98CTIHR; Accessories: Product features:, Start battery; Water Tank Volume [l]: 330
General SKU327W690 MakeDrais Mannheim LocationBarneveld TypeTR400 E PS EMS 180 Pressure Working pressure40 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature165 °C Main Features MaterialStainless steel Volume540 Ltr. Specified Features - Paddle dryer Paddle dryercheck Capacity550 l (netto 400 l ) Trough sizes± 700x800 mm Manholecheck dia. 700 mm OutletDN125 With jacketcheck 29 l Max. temperature165°C With mechanical sealcheck Motorcheck Speed mixing shaft45-135 rpm With lump breakercheck 1500 rpm Motorcheck MaterialStainless steel Information No.5700 Year of construction1998 Floorspace3,1 x1,9 m Total height3,2 m Weight5800 kg Extra SpecificationsShaft seal: double-acting mechanical seals Heating/cooling double jacket (max. 6 bar) and head condenser (vapor dome) Food additivesPaddle dry ...
Injection moulding machine ARBURG 820 S 4000-2100 with Multilift Select (2016)
Control: FANUC Series O-M, with tool magazine, coolant system, central lubrication, electrical cabinet, air conditioning unit and spindle oil cooler HARBOR OILCON HBO-250 PT, year of manufacture: 1991. An on-site inspection is possible.
A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.
Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.
Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left
Excellent condition - Fully operational - Loading / Transport possible! Control POWER CONTROL PC 20 PLUS Infeed ruler with motorized single-axis-adjustment Top pressure beam with motorized height adjustment Edge magazine single Jointing cutter unit Cross-cut saw unit 2-motor Profile cutter unit top/bottom with multiple roller scanning Form cutter unit 1-motor Profile and flat scraper unit Buffing unit Edge thickness 0.4 - 8 mm Workpiece thickness 8 - 60 mm Feed 8 - 14 m/min joint trimming unit 2 x 2.2 KW snipping unit 2 x 0.18 KW rough trimming unit 2 x 0.55 KW
Capacity: 230 x 125 mm. Number of axes: 4 Axis diameter 40 mm Bottom 6.3 kW, right/left 7.5 kW, top 7.5 kW Mobile axis for various widths Pneumatic pressers Variable feed speed Motorized height adjustment of the top bar Feed table 2000 mm length Knife heads included
Top and bottom sander Usefull width: 435 mm. Sanding units top: Roller 7,5 kW, Pad 5,5 kW bottom : Roller 7,5 kW, Pad 5,5 kW Sanding belt sizes: 455 x 1900 mm. Workpiece thickness: 5 - 200 mm Min workpiece length: 320 mm. Feed speed of the carpet: 8 and 16 m/min, motor 2,2 kW
Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures
Electric motor, three-phase motor, brake motor -Manufacturer: SSB Antriebstechnik, electric motor with brake -Type: DS-0410.408.50-K1-B14 -Power: 0.55 kW -Speed: 1350 rpm -Brake: 5 Nm -Shaft: Ø 19 x 40 mm -Design: B14 -Protection class: IP 54 -Quantity: 1x motor available -Dimensions: 345/215/H160 mm -Weight: 16.3 kg
Number of milling spindles: 4 St. fence: ja ja /nein workpiece: ja Stegherr KSF 2/4 - The modern, practical machine concept for efficient crossbar production. Years of expertise and a sophisticated, thousands-proven machine guarantee precision at an optimal price-performance ratio. Particular emphasis is placed on the machines ease of use and flexibility. KSF 2/4 upgrade: Milling units A1, A2, A3 as with KSF 2. + Milling unit A4, machining of the counterpart without turning, view side absolutely tear-out-free. Digital fence (moving carriage, reliable and quick readability to 1/10 mm). foot switch With tools in the machine as shown in the pictures plus 2 additional profile cutters, see pictures. Further accessories are shown in the pictures. Compressed air pressure: p = 6 bar The following work was carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexig ...
This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details.
Wheel diameter: 600 mm Cutting height: 480 mm Dimensions (L/W/H): 5200x1600x1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details.
Bending length: 4100 mm Pressing force: 240 tons Equipped with a set of large number of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: 3-phase Year: 2021 Serial Number: 28635
This 4-axis DMG MORI CLX 450 V4 was manufactured in 2021. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools and a Y-axis. If you are looking for high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details.
Excellent condition - Fully operational - Loading / Transport possible! Main Blade Saw: motor power 5.50 KW, 3 speeds: 3000/4000/5000 rpm, maximum diameter 400 mm, inside diameter 30 mm, tilting 0°- 45° Scoring unit: motor power 0.75 KW, speed 8500 rpm, diameter 120 mm, inside diameter 20 mm Carriage dimensions 3200 x 330 mm Table dimensions (long x width) 1040 x 630 mm Maximum cutting width on parallel fence approx. 1350 mm Maximum cutting length approx. 3200 mm Max. cutting height to 0°: 130 mm, max. cutting height to 45°: 92 mm Automatically controlled functions: blade saw tilt and blade saw height Dimensions for transport 3600 x 1600 x 1700 mm
This 3-axis DMG MORI CLX 450 V3 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a Z-axis travel of 600 mm. The machine is equipped with a powerful spindle capable of 4000 rpm and includes 12 driven tool stations for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details.
This 4-axis EDEL Koordimatic XL 4020 gantry milling machine was manufactured in 2003. It features a substantial working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and has a travel distance of 760 mm in the Z-axis. If you are looking to get high-quality milling capabilities, consider the EDEL Koordimatic XL 4020 machine we have for sale. Contact us for further details.
This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 Ã 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details.
Complete cut-off grinding system manufactured in 2014. This HARALD BAUGMARTEN TM 400 S features a press force of 3500 kN and a cutting speed of approximately 30 mm/s at 500 kN. It includes a robust hydraulic system with a total drive power of 30 kW and a machine weight of around 13,000 kg. If you are looking to get high-quality cutting capabilities, consider the HARALD BAUGMARTEN TM 400 S complete cut-off grinding system we have for sale. Contact us for further details.
Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ã400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.
Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.
This 3-axis TRUMPF Trumatic L 4030 was manufactured in 2006. It features a processing area of 4000 mm x 2000 mm and a powerful 4000 W laser. The machine requires a mains supply of 400 V and has a total connected load of 88 kVA. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 4030 CO2 laser cutting machine we have for sale. Contact us for further details.
This 3-axis Bystronic BySprint Fiber 4020 was manufactured in 2017. It features a cutting area of 4,064 mm by 2,032 mm and a maximum cutting thickness of 70 mm. The machine is equipped with a powerful 6,000 W fiber laser, capable of handling various materials. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 machine we have for sale. Contact us for further details.
Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details.
This 3-axis Bystronic BySprint Fiber 4020 Fiber 4Kw was manufactured in 2019. It features a maximum sheet size of 4000 x 2000 mm and a powerful 4000-watt laser. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 Fiber 4Kw machine we have for sale. Contact us for further details.
This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 â 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details.
This 4-axis PENTA 433GS CNC was manufactured in 2013. It features a working area of 1000 Ã 550 Ã 320 mm and a maximum workpiece weight of 700 kg. The machine is equipped with an automatic electrode changer and a controlled rotary axis (C-axis). If you are looking to get high-quality die-sinking capabilities, consider the PENTA 433GS CNC die-sinking EDM machine we have for sale. Contact us for further details.
This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details.
This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details.
This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2000. This Netstal Synergy 1500-460 features a clamping force of 1500 kN and an injection force of 279 kN. It offers an opening stroke of 0â450 mm and a mould height range of 400â700 mm. If you are looking to get high-quality moulding capabilities, consider the Netstal Synergy 1500-460 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.
To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A. ...
bore capacity in steel (diameter): 40 mm throat: 220 mm bore stroke: 120 mm spindle taper MT: 4 spindle turning speed range: 105 - 1257 U/min no. of turning speeds: 8 Stufen table surface area: 400 x 320 mm base plate: 390 x 650 mm voltage: 400 V / 50 Hz total power requirement: 1,1 / 1,8 kW weight of the machine ca.: 0,3 t range L-W-H: 2,1 x 1,0 x 0,7 mm with quick-action drill chuck 3-16 mm, drill chuck protection, work table can be rotated, swiveled and height-adjusted, coolant device, lighting, right/left spindle rotation, mechanical depth stop, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
