gto 52 2 used for sale

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool radius: mm -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Bending tool, die, upper knife, upper tool, straight tool -Handover in the current condition as seen -partially damaged -Tool: for press brake -Dimensions: 35 x 154 mm -Length: 2653mm -Weight: 79.5kg

Inv. Num. : 8005 Type: RUM 2500 P Producer: PIERCE Created: 2015 Parameters: Control system: Pierce 4/2015 Software: PIERCE WYKRYS CZ Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 60 mm Equipment: Technical documentation Plasma source Kjellberg HiFocus 360i Suction KEMPER

Kannegiesser belt conveyor belt conveyor GF 2250- 880- 800 RA2320 Technical data: Conveyor length (NL): 2250 mm frame width (NB): approx. 880 mm Belt width (GuB): 800 mm Overall height(BH): 110mm Number of support feet: without Conveying speed (v m/s): 0,7at 50Hz, adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,75 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 01/2020 Optionally available: Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2020 condition: as good as new (used) Conveying length in mm: 2250 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Bauer Getriebemotor KW: 0,75/S1 Conveyor speed m / s: fr ...

Key data: 330 KW

Used Jenbacher 208 gas engine, GenSet BJ 2005; Replacement engine was installed in 2017 - since then 30,000 operating hours (without maintenance), generator, load cabinet, Diane XT, gas control system natural gas, more information on request

: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg

Specifications: - E.- Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 210 mm - Flat approx. 240 x 190 mm - Square approx. 210 x 210 mm - Cutting range at 45° round approx. 150 mm - Flat approx. 150 x 100 mm - approx. 130 x 210 mm Square approx. 145 x 145 mm - Lifting speeds + cutting speeds adjustable - Stroke rates 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre adjustment Vise with opening width up to 260 mm - E.-Mot. Coolant Setup - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Key data: 160 KW, 200 kVA

We currently offer: Number 41 Cummins generator set Type: 6CT Generator LeRoy Somer Type: LSA 46.1 M5 Power: 200 KVA / 160 KW Year of manufacture generator 1999 / engine 2004 Hz 50 RPM 1500 AVR control R448 IP 21 Hours: 8505 Metrics: L: 3.30m W: 1.25m H: 1.95m Weight: approx. 2000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Key data: 205 KW, 255 kVA

We currently offer: Number 43 Doosan generator sets Type: G250 Engine Cummins Type: QSL9-G3 Generator LeRoy Somer Type: LSA 46.2L9 Power: 255 KVA / 205 KW Hz 50 RPM 1500 IP 23 AVR control: R448 Year of construction 2009 Hours: 11532 Metrics: L: 4.05m B: 1.40m H: 2.45m Weight: approx. 4500 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 160 KW, 200 kVA

We currently offer: Number 48 Generator set Engine Perkins 1300 Power 200 KVA / 160 KW Year of manufacture 1996 IP 22 Hz 50 AVR Control SX460 Hours: 8654 Metrics: L: 5.00m W: 1.35m H: 2.00m Weight: approx. 4 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 200 KW, 250 kVA

We currently offer: Number 7 John Deere generator set Power Tech 6.8 liters Type: RE 507891 Generator LeRoy Somer Type: LSA 46. 2L6 C 6/4 Power 250 KVA / 200 KW Hz 50 RPM 1500 IP 23 AVR control R448 Year of construction 2006 Metrics: L: 3.80m H: 2.20m W: 1.10m Weight: approx. 2.5 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Number 33 Iveco generator set Type: 701898 Generator Marelli Type: M7250 Power: 214 KVA Hz 50 RPM 1500 IP 23 Built in 1994 Hours: 5505 Metrics: L: 3.80m W: 1.35m H: 2.15m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Electric motor, three-phase motor with 2 speeds -Power: 2/6 kW -Speed: 965/1455 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 480/320/H260 mm -Weight: 69 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.4 kg

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51mm -Outer: Ø 250 mm -Width: 39 mm -Price: per piece -Number: 2x available -Weight: 4.2 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 50 mm -Outer: Ø 200 mm -Width: 25 mm -Price: per piece -Number: 1x available -Weight: 1.2 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 32 mm -Price: per piece -Number: 1x available -Weight: 2.0 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 32 mm -Price: per piece -Number: 2x available -Weight: 2.1 kg

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

Electric winch with junction box Manufacturer: Haacon Model No.: VTF 1400/213457/875285 The winch is new and unused, but may show signs of storage.

Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

Electric motor, three-phase motor with 2 speeds -Power: 3/9 kW -Speed: 960/1450 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Quantity: 1 available -Dimensions: 585/320/H390 mm -Weight: 110 kg

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

Gear motor, electric motor, electric gear motor -Speed: 18/2 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 30 mm -Protection class: IP 44 -Brake: 24 V -Quantity: 1x available -Dimensions: 660/260/H230 mm -Weight: 40 kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H285 mm -Weight: 49 kg

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 530/250/H220 mm -Weight: 31 kg

SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm

Feed Pump Centrifugal Pump Manufacturer: KSB Model No.: Etanorm G032-200 20.0 m³/h Head 58 mtr. m. electric motor 8.6kw The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.

Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg

Water Pump/ Slurry Pump Manufacturer: Allweiler Model No.: CLT-H-80-250 150 m³/h 95.2 mtr. Head Electric Motor : Allweiler Type: 16BA280-2AC B3 75kw The pump is new and unused, but may show signs of storage.

Hydraulic Pump Variable Displacement Pump Manufacturer: Poclain Hydraulics Model No.: MSE18-2-D11-T19-2A50257EF The pump is NEW and fully functional. see pictures for more details.

Gear motor, electric motor -Speed: 29 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 65 -Weight: 44 kg

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Spring cable reel CAVOTEC TYPE 28431412EA4507 New part from stock. May show traces of storage.

Gear motor, electric motor, electric gear motor -Speed: 142 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Dimensions: 440/245/H170 mm -Weight: 21 kg

Gear motor, electric motor -Speed: 14 rpm -Power: 0.11 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 37 kg

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 250 mm -Recess diameter: 205 mm -Bolt circle: 226 mm -Weight: 22 kg

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Geared motor Article number: FDU1703/2358232 003 2KJ3502-7EK23-2HG1-Z BAZ39-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:181r\min 60HZ n2:219r\min 24Kg NEW and fully functional, from stock, see pictures for more details.

Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg

Geared motor Article number: 2KJ3102-1DE22-2AP1-Z FDU1705/2370145 001 Z29-LE80MH4E-L16\10N 50HZ - 60HZ 0.75 KW S1 1440r\min 50HZ n2:99r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: L A6VM 250 HD3 / 63W -VZB - B - SO154 Condition : New

Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg